We will reply to your message within an hour.
These steel anchors are available with corrosion-resistant finishes.
Keep fixtures solidly in place—these anchors have two locking wedges that won't shake loose.
A zinc plating provides corrosion resistance in wet environments.
The removable flat head provides a flush finish in countersunk holes.
An open-end cap nut provides a finished appearance.
Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.
Turn the bolt to expand the nut for a secure hold in concrete. These anchors are often used to anchor machinery.
Bolts are beveled under the head for a flush finish in countersunk holes.
Use in applications requiring high strength.
A tamper-resistant nut prevents unwanted removal of the object you are anchoring.
These stud anchors strengthen the parts of buildings where steel framing connects to concrete. They’re also known as Nelson studs.
These stud-style anchors include a nut and a washer.
A pivoting toggle bar creates a strong hold.
For narrow holes and small cavities where toggle anchors won't fit.
A spring-loaded toggle holds against the back of the material.
Bolts are beveled under the head for use in countersunk holes.
A shallow head makes these bolts good for low-clearance applications.
Use these stud-style anchors with nuts.
High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.
A drilled hole is required for installation.
Also known as Tapcons, use these screws in applications requiring high strength.
These blue and silver ultra-corrosion-resistant coated steel screws stand up to wet environments.
The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. Once tightened, the spring adds vibration resistance.
These hangers are a popular choice for overhead applications.
Wedge these hangers in concrete and other solid materials.
You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).
Drill holes with the point on these hangers.
These hangers have internal threads for use with threaded rods, bolts, and anchors.
Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.
Made from steel comparable to Grade 5 steel, these bolts are suitable for most work-holding applications.
About half the strength of medium-strength bolts, these bolts are for light duty work-holding.
These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.
The shoulder’s diameter is slightly smaller than listed, so these studs fit most machinery and equipment.
Also known as dowel screws, use these to join two pieces of wood.
Use these light duty anchors to hold 20 lbs. or less.
A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more.
Also known as Tapcons, these screws are often used to anchor parts to concrete, block, and brick. Assortments include a drill bit.
A black-oxide finish provides mild corrosion resistance.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Install directly into a mounting surface to suspend threaded rod from ceilings and walls.