A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

Mount these bearings onto a hex shaft.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.

These bearings have twice as many contact points as angular-contact ball bearings.

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

A metal shell adds strength.

Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.

Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.