Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

These hinges have a standard range of motion of 100° to 120°.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden

Surface-mount these hinges to the side of a cabinet.

Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

These hinges are made of metal.

These hinges are made of metal.

The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

These hinges are made of metal.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

Remove the ring to pull out the pin.

These hinges are completely hidden when the door is closed.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame.

The mounting holes form an industry-standard half-moon shape.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Also known as gravity hinges, the weight of the door returns these hinges to a closed position without the help of springs.

These hinges are made of metal.

Choose these hinges for their adherence to strict military standards for material and construction.

The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal.