Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Made of stiff low-carbon steel to deflect less under load, these H-bars are commonly used in machine bases, construction, platforms, and frames.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

This welded, one-piece strut channel combines two strut channels side-to-side.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Create continuous runs of channel without corners.

Push these nuts into place rather than threading them onto a fastener.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Keep a rod securely centered against the strut channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Serrated grooves grip the lip of the channel.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Keep hardware centered in the strut channel slot.

Notches on these washers grip the channel to keep them in place.

Brackets mount on the outside of strut channel to allow trolley movement.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Support the corners of strut channel structures.

Cover rough ends of strut channel.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Provide smooth motion between two pieces of strut channel.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Create strong structures by welding this framing together. Add metal panels to close off openings.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.