For Cord OD Range For Cord OD Range |
|---|
|
Finish Finish |
|---|
|
For Maximum Cord OD For Maximum Cord OD |
|---|
|
|
|
Specifications Met Specifications Met |
|---|
|
Steel Cord Grips
For technical drawings and 3-D models, click on a part number.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | ||||||||
| For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
| 0.13"-0.19" | 3/8 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 000000 | 00000 | 0000000 | 00000 |
| 0.13"-0.19" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.13"-0.19" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.19"-0.25" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.19"-0.25" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.25"-0.31" | 3/8 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.25"-0.38" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.25"-0.38" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.38"-0.44" | 3/8 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.38"-0.5" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 0000 | 0000000 | 0000 |
| 0.38"-0.5" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.5"-0.6" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.5"-0.63" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.5"-0.63" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.63"-0.72" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.63"-0.75" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.63"-0.75" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.75"-0.85" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.75"-0.85" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.75"-0.88" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.88"-0.97" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
90° Elbow Steel Cord Grips
For technical drawings and 3-D models, click on a part number.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | ||||||||
| For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
| 0.19"-0.25" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 000000 | 000000 | 0000000 | 00000 |
| 0.25"-0.38" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.38"-0.5" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.38"-0.5" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.5"-0.6" | 1/2 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.5"-0.63" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.63"-0.75" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.63"-0.75" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
| 0.75"-0.85" | 3/4 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
Steel Liquid-Tight Cord Grips
Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
| 0.13"-0.19" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 000000 | 000000 |
| 0.19"-0.25" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.25"-0.38" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.25"-0.38" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.38"-0.5" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.38"-0.5" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.5"-0.6" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.5"-0.63" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.5"-0.63" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.63"-0.75" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.63"-0.75" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.75"-0.85" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
90° Elbow Steel Liquid-Tight Cord Grips
Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
| 0.19"-0.25" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 000000 | 000000 |
| 0.25"-0.38" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.38"-0.5" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.38"-0.5" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.5"-0.6" | 1/2 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.5"-0.63" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.63"-0.75" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
| 0.75"-0.85" | 3/4 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
Liquid-Tight Multi-Diameter Multi-Cord Grips
Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter. They include a frame with two-piece rubber inserts that fit around cables with connectors. The inserts are made of layers that you peel away until you reach the size that fits your cord.
Grips are rated IP67 for protection from temporary water submersion and NEMA 4X and 13 for indoor and outdoor protection against corrosion, water projected from a hose, and oil/coolant spraying.
Replacement inserts allow you to change cord sizes and configurations.
For technical drawings and 3-D models, click on a part number.
For Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total No. of Cords | For Cord OD (No. of Cords) | Mounting Location | Lg. | Wd. | Dp. | Cutout Lg. | Cutout Wd. | Max. Thick. | Temp. Range, °F | Specifications Met | Each | |
| 4 | 0.37"-1.28" | Panel | 9.21" | 3.66" | 1.65" | 7.4" | 2.8" | 0.16" | -75° to 185° | UL Listed | 000000 | 0000000 |
| 10 | 0.14"-0.65" (8), 0.37"-1.28" (2) | Panel | 9.21" | 3.66" | 1.65" | 7.4" | 2.8" | 0.16" | -75° to 185° | UL Listed | 000000 | 000000 |
| 16 | 0.14"-0.65" | Panel | 9.21" | 3.66" | 1.65" | 7.4" | 2.8" | 0.16" | -75° to 185° | UL Listed | 000000 | 000000 |
| 19 | 0.14"-0.41" (12), 0.14"-0.65" (6), 0.37"-1.28" (1) | Panel | 9.21" | 3.66" | 1.65" | 7.4" | 2.8" | 0.16" | -75° to 185° | UL Listed | 000000 | 000000 |