Pull the chain-grip to unlatch hard-to-reach doors and panels. Bolts are spring-loaded to stay latched until you activate the pull. All latches have bolts that can be rotated 180°, so they can be used with both push and pull doors. They are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position. They are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

The mounting screws on these latches are concealed to prevent tampering. All latches are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

The strike has angled ends, so these latches can accept their bolt even when doors become misaligned. All latches are reversible for right- and left-hand mounting.

Brass- and zinc-plated steel latches should be used in mostly dry environments. The plating offers temporary rust protection, but once it wears away the steel will rust.

For technical drawings and 3-D models, click on a part number.

The mounting screws on this padlockable latch are concealed to prevent tampering. The latch is reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

These padlockable latches are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

This padlockable latch is often used on 2" and 3" track to keep garage and other sectional overhead doors closed. It's reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches. Slide the bolt and drop the handle to secure. The handle stays out of the way when not in use. All latches are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

Slide the bolt and drop the knob into the notch to secure. All of these latches are reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

Choose this lock if you need several locks that open with the same key. The mounting screws are concealed to prevent tampering. Lock can be locked in the open or closed position. It is reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

The mounting screws are concealed to prevent tampering. Choose this lock if you need locks that each open with a different key. It can be locked in the open or closed position. It is reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

Designed to stand up to heavy use, this latch is often seen on refrigerators and truck doors. It's reversible for right- and left-hand mounting.

For technical drawings and 3-D models, click on a part number.

These latches are reversible for right- and left-hand mounting.

Style A has a strike plate that creates a sleeve to hold the bar. A back catch holds the bar when it's not latched. This latch includes a machine screw for mounting.

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.