Steel Flat Head Socket Cap Screws

Filter by

System of Measurement

Thread Size

Length

Drive Style

Tamper-Resistant Torx

Tamper-Resistant Torx Plus

Finish

Flat Head Profile

Material

Countersink Angle

Threading

Head Diameter

Drive Size

Thread Type

Fastener Strength Grade/Class

Head Height

Tensile Strength

Thread Pitch

Specifications Met

Thread Spacing

Thread Fit

Unified Standard Class 2A

Unified Standard Class 3A

DFARS Specialty Metals

RoHS

REACH

Export Control Classification Number (ECCN)

Hardness

Performance

Thread Length

1,355 Products

Drive Style

Hex

Six contact points securely grip your driver without stripping the drive

1,133 products

Torx

A six-lobe opening prevents drivers from slipping

125 products

Drive Style

Torx Plus

A step up from Torx for your highest torque jobs

79 products

Tamper-Resistant Torx

A six-lobe opening with a pin withstands high torque and prevents tampering

11 products

Steel Hex-Drive Flat Head Screws

Our strongest hex-drive flat head screws. They're made of alloy steel, so they have nearly twice the tensile strength of other screws. With six contact points, the hex drive withstands more torque than slotted and Phillips to securely grip your driver without slipping and stripping the drive.

Length is measured from the top of the head.

Black-Oxide Alloy Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Plated Alloy Steel—A common choice for areas with occasional exposure to moisture.

Blue-Dyed Zinc-Plated Alloy Steel—These metric-sized screws have a distinctive blue color, so you can easily tell them apart from inch screws.

Cadmium-Plated Alloy Steel—The plating reduces friction between the screw and your mounting surface to prevent sticking when you tighten or loosen them. It also creates a barrier against rust.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.
Black-Oxide Alloy Steel







				0-80

				1/8"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	000000


				3/16"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1/4"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				5/16"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				3/8"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1/2"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				5/8"	82°	Standard	0.138"	0.044"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				3/4"	82°	Standard	0.138"	0.044"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				1"	82°	Standard	0.138"	0.044"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000




						1-64

						1/8"	82°	Undercut	0.168"	0.031"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000


						3/16"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
						1/4"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000




								1-72

								1/8"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


								3/16"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1/4"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								5/16"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
								3/8"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1/2"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								5/8"	82°	Standard	0.168"	0.054"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000




										2-56

										1/8"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


										5/32"	82°	Undercut	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
										3/16"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
										1/4"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
										5/16"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
										3/8"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
										7/16"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
										1/2"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
										5/8"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
										3/4"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
7/8"										82°	Standard	0.197"	0.064"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000


1"	82°									Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000




		2-64

		1/4"	82°							Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000


		3/8"	82°							Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		1/2"	82°							Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000




										3-48

										3/16"	82°	Undercut	0.187"	0.042"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


				1/4"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				5/16"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
				3/8"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				1/2"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				5/8"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				3/4"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1"	82°					Standard	0.226"	0.073"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000




						3-56

						1/4"	82°			Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


						3/8"	82°			Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
						1/2"	82°			Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000




										4-40

										1/8"	82°	Undercut	0.255"	0.047"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


								5/32"	82°	Undercut	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
								3/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
								1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								5/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								7/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	0000
								1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								9/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
								5/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								3/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000


								7/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
								1 1/8"	82°	Standard	0.255"	0.083"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
								1 1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1 1/2"	82°	Standard	0.255"	0.083"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000




								4-48

								1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


								3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
								1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
								5/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
								3/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		1"						82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000




								5-40

								1/8"	82°	Undercut	0.281"	0.053"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


								3/16"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1/4"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								5/16"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
								3/8"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								1/2"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								5/8"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
				3/4"				82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
				1"	82°			Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1 1/4"	82°			Standard	0.281"	0.09"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				1 1/2"	82°			Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000




								5-44

								3/8"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


						1/2"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
						3/4"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000




								6-32

								1/8"	82°	Undercut	0.262"	0.059"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


								5/32"	82°	Undercut	0.262"	0.059"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
								3/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1/4"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								5/16"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	0000
								3/8"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								7/16"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	50	000000000	0000
								1/2"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								9/16"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
								5/8"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
								3/4"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000


								7/8"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1"								82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1 1/4"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
1 1/2"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
1 3/4"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
2"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
2 1/2"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
3"	82°							Standard	0.307"	0.097"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000




								6-40

								1/4"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


		3/8"	82°					Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
		1/2"	82°					Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		5/8"	82°					Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
		3/4"	82°					Standard	0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
		1"	82°					Standard	0.307"	0.097"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000




								8-32

								5/32"	82°	Undercut	0.312"	0.07"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


								3/16"	82°	Undercut	0.359"	0.07"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								1/4"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
								5/16"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				3/8"				82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
				7/16"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
				1/2"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
				9/16"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
				5/8"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
				3/4"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
				7/8"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


				1"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
				1 1/8"	82°			Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
				1 1/4"	82°	Standard		0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
				1 3/8"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				1 1/2"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
				1 5/8"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
				1 3/4"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
				2"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
				2 1/4"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
				2 1/2"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000


				3"	82°	Standard	0.359"	0.112"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000




						8-36

						3/8"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000


						1/2"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						3/4"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1 1/4"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000




								10-24

1/4"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


5/16"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
3/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
7/16"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
1/2"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
9/16"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
5/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
3/4"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
7/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
1 1/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


1 1/4"	82°	Standard	0.411"					0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
1 3/8"	82°	Standard	0.411"					0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
1 1/2"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
1 3/4"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
2"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
2 1/4"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
2 1/2"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3 1/2"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000
4"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000


5"	82°	Standard	0.411"					0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000




		10-32

		3/16"	82°					Undercut	0.362"	0.081"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


		1/4"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		5/16"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		3/8"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		7/16"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
		1/2"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
		9/16"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		5/8"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
		3/4"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	100	000000000	00000
		7/8"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		1"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000


		1 1/8"	82°	Standard	0.411"			0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		1 1/4"	82°	Standard	0.411"			0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
		1 3/8"	82°	Standard	0.411"			0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		1 1/2"	82°	Standard	0.411"			0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
		1 5/8"	82°	Standard	0.411"			0.127"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
		1 3/4"	82°	Standard	0.411"			0.127"	Partially Threaded	130,000	ASTM F835	—	25	000000000	00000
		2"	82°	Standard	0.411"			0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		2 1/4"	82°	Standard	0.411"			0.127"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
		2 1/2"	82°	Standard	0.411"			0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		3"	82°	Standard	0.411"			0.127"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


		3 1/2"	82°	Standard	0.411"	0.127"		Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000
		4"	82°	Standard	0.411"	0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000




				12-24

				3/8"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


				1/2"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				5/8"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				3/4"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				1"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
				1 1/4"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
				1 1/2"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
				2"	82°	Standard	0.422"	0.135"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000




						1/4"-20

						1/4"	82°	Undercut	0.531"	0.107"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


						3/8"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
						7/16"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1/2"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
						9/16"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
						5/8"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
						3/4"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
7/8"						82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
1 1/8"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1 1/4"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000


1 3/8"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
1 1/2"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
1 5/8"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
1 3/4"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
2"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
2 1/4"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
2 1/2"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
2 3/4"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
3"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
3 1/4"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000


3 1/2"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
4"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
5"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000
6"	82°					Standard	0.531"	0.161"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000




						1/4"-28

						1/4"	82°	Undercut	0.477"	0.107"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


						5/16"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
						3/8"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
						7/16"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
						1/2"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		9/16"				82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
		5/8"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		3/4"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		7/8"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		1"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
		1 1/8"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000


		1 1/4"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
		1 3/8"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
		1 1/2"	82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		1 3/4"	82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
		2"	82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
		2 1/4"	82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
		2 1/2"	82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
		2 3/4"	82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
		3"	82°	Standard		0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		3 1/2"	82°	Standard	0.531"	0.161"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000




				5/16"-18

				3/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


				1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				5/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				7/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				1 1/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1 1/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				1 3/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1 1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1 3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000


				2"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				2 1/4"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				2 1/2"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				2 3/4"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
				3"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
				3 1/4"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				3 1/2"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				4"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				5"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000




						5/16"-24

3/8"	82°					Undercut	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


1/2"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
5/8"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
3/4"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
7/8"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
1"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
1 1/8"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
1 1/4"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
1 1/2"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
1 3/4"	82°					Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
2"	82°					Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000


2 1/4"	82°					Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
2 1/2"	82°					Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3"	82°					Standard	0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3 1/2"	82°					Standard	0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000




						3/8"-16

						3/8"	82°	Undercut	0.717"	0.161"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


						1/2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
						5/8"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		3/4"				82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
		7/8"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
		1"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		1 1/8"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
		1 1/4"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		1 3/8"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
		1 1/2"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		1 5/8"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000


		1 3/4"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
		2"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
		2 1/4"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
		2 1/2"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
		2 3/4"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
		3"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000
		3 1/4"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
		3 1/2"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
		3 3/4"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
		4"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000


		4 1/2"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		5"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		5 1/2"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		6"	82°			Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000




				3/8"-24

				1/2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


				5/8"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				3/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				7/8"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				1"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1 1/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1 1/2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
				1 3/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
				2 1/4"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				2 1/2"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000


				2 3/4"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
				3"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
				3 1/4"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000
				3 1/2"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000




7/16"-14

1/2"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000


3/4"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
7/8"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000
1"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 1/4"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 1/2"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 3/4"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
2"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
2 1/4"	82°					Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
2 1/2"	82°					Standard	0.844"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3"	82°					Standard	0.844"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000


3 1/2"	82°					Standard	0.844"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000
4"	82°					Standard	0.844"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000




						7/16"-20

						3/4"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000


						1"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 1/4"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 1/2"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 3/4"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
						2"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						2 1/2"	82°	Standard	0.844"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000
						3"	82°	Standard	0.844"	0.234"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000




			1/2"-13

			1/2"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000


			5/8"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
			3/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
			7/8"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
			1"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
			1 1/8"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
			1 1/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
			1 3/8"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
			1 1/2"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
			1 5/8"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
			1 3/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000


			2"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
			2 1/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
			2 1/2"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
			2 3/4"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
			3"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
			3 1/4"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
			3 1/2"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
			3 3/4"				82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
			4"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
			4 1/2"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000


			5"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
			5 1/2"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
			6"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	00000
			6 1/2"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
			7"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
			8"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
			9"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			10"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			11"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			12"	82°	Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




					1/2"-20

					3/4"		82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	00000


1"	82°				Standard		0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 1/4"	82°				Standard		0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 1/2"	82°				Standard		0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
1 3/4"	82°				Standard		0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
2"	82°				Standard		0.938"	0.251"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
2 1/4"	82°				Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
2 1/2"	82°				Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
3"	82°				Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	5	000000000	00000
3 1/2"	82°				Standard		0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000




					5/8"-11

		3/4"			82°		Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000


		1"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
		1 1/4"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		1 1/2"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		1 3/4"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		2"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		2 1/4"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		2 1/2"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		2 3/4"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
		3"			82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000
		3 1/4"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000


		3 1/2"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		4"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		4 1/2"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		5"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		5 1/2"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		6"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		7"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
		8"			82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




						5/8"-18

						1"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000


						1 1/4"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						1 1/2"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						1 3/4"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2 1/4"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2 1/2"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						3"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						3 1/2"	82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




						3/4"-10

						1"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000


						1 1/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						1 1/2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						1 3/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						2 1/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2 1/2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2 3/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						3"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						3 1/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						3 1/2"	82°	Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000


4"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
4 1/2"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
5"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
5 1/2"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
6"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
6 1/2"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	00000
7"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
8"	82°					Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




						3/4"-16

						1 1/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000


						1 1/2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						1 3/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
						2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
						2 1/4"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000
						2 1/2"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
						3"	82°	Standard	1.438"	0.396"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
						3 1/2"	82°	Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
						4"	82°	Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




					7/8"-9

					1 1/2"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


					1 3/4"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
					2"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
					2 1/2"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
					3"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
					3 1/2"		82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000




								1"-8

			1 1/2"					82°	Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


			2"	82°				Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
			2 1/4"	82°				Standard	1.938"	0.54"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	00000
			2 1/2"	82°				Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
			3"	82°				Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
			3 1/2"	82°				Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
			4"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			4 1/2"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			5"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			5 1/2"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
			6"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000


			7"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	00000
			8"	82°				Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




								1"-14

								2"	82°	Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


								2 1/2"	82°	Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
								3"	82°	Standard	1.938"	0.54"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000




								1 1/8"-7

								3"	82°	Standard	2.188"	0.611"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


								4"	82°	Standard	2.188"	0.611"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




										1 1/4"-7

										3"	82°	Standard	2.438"	0.683"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


		4"				82°				Standard	2.438"	0.683"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000
		5"				82°				Standard	2.438"	0.683"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




										1 1/4"-12

										3"	82°	Standard	2.438"	0.683"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000




					1 1/2"-6

					4"		82°					Standard	2.938"	0.827"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


					5"		82°					Standard	2.938"	0.827"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
					6"		82°					Standard	2.938"	0.827"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




												M2 × 0.4 mm

												4 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000


												6 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
												8 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
												10 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
												12 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
												16 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	—	—	25	000000000	0000
												20 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	120,000	—	—	25	000000000	00000




												M2.5 × 0.45 mm

												4 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000


												5 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	—	—	25	000000000	00000
												10 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	—	—	25	000000000	0000
												12 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	—	—	25	000000000	0000
16 mm												90°	Standard	5 mm	1.5 mm	Partially Threaded	120,000	—	—	25	000000000	00000
20 mm	90°											Standard	5 mm	1.5 mm	Partially Threaded	120,000	—	—	25	000000000	00000
25 mm	90°											Standard	5 mm	1.5 mm	Partially Threaded	120,000	—	—	25	000000000	00000




												M3 × 0.5 mm

												5 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000


								6 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								8 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								10 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								12 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								14 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								16 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
								18 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
								20 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
								22 mm	90°			Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
		25 mm						90°	Standard			6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000


		30 mm				90°		Standard	6 mm			1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
		35 mm				90°		Standard	6 mm			1.7 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000




								M4 × 0.7 mm

								6 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000


								8 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								10 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								12 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
								14 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
					16 mm			90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
					18 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
					20 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
					22 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
					25 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
					30 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000


					35 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
					40 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
					45 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
					50 mm		90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000




				M5 × 0.8 mm

				6 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	ISO 10642	—	25	000000000	0000


				8 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	0000
				10 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				12 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				14 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				16 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				18 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				20 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				22 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
				25 mm			90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
30 mm				90°			Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000


35 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
40 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
45 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
50 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
55 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
70 mm	90°			Standard			10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000




				M6 × 1 mm

				6 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


				8 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				10 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				12 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				14 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				16 mm			90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
		18 mm		90°			Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
		20 mm		90°			Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
		22 mm		90°			Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
		25 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
		30 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000


		35 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
		40 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
		45 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		50 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		55 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		60 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		65 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
		70 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		75 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		80 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000


		100 mm		90°		Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000




						M8 × 1.25 mm

			10 mm			90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000


			12 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
			14 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			16 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
			18 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
			20 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
			22 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			25 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
			30 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
			35 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
			40 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000


			45 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			50 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			55 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			60 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			65 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
			70 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
			80 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
			90 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
			100 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
			110 mm		90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	0000


120 mm	90°		Standard		16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000




			M10 × 1.5 mm

			12 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000


			16 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			18 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
			20 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			22 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			25 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			30 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
			35 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			40 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			45 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
			50 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


			55 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
			60 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
			65 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
			70 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
			75 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
			80 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
			90 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
			100 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
			110 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
			120 mm		90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000




				M12 × 1.75 mm

				18 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


				20 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				25 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				30 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				35 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				40 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				45 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				50 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				55 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				60 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				70 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000


				80 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
				90 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
				100 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
				110 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
				120 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
				130 mm	90°	Standard	24 mm	6.5 mm	Partially Threaded	120,000	DIN 7991	—	1	000000000	0000




						M14 × 2 mm

						25 mm	90°	Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000


30 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
35 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
40 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
45 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
50 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
60 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
70 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
80 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
90 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
100 mm	90°					Standard	27 mm	7 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000




						M16 × 2 mm

						20 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000


						25 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
						30 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						35 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						40 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						45 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
						50 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						55 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						60 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
						65 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
						70 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000


		75 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
		80 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		90 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		100 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		110 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
		120 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000




						M18 × 2.5 mm

						40 mm	90°	Standard	33 mm	8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000


						50 mm	90°	Standard	33 mm	8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
						60 mm	90°	Standard	33 mm	8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
						80 mm	90°	Standard	33 mm	8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000




								M20 × 2.5 mm

								35 mm	90°	Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000


				40 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	00000
				45 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
				50 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
				55 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
				60 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000
				70 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	00000
				80 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
				90 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
				100 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000
				110 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	0000


				120 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	1	000000000	00000
				130 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000
				140 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000
				160 mm	90°			Standard	36 mm	8.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000




				M24 × 3 mm

				50 mm	60°			Standard	39 mm	14 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000


				60 mm	60°			Standard	39 mm	14 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
				80 mm	60°			Standard	39 mm	14 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000
				90 mm	60°			Standard	39 mm	14 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000
				100 mm	60°			Standard	39 mm	14 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000




								M30 × 3.5 mm

								90 mm	60°	Standard	49 mm	19.6 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	00000


								Zinc-Plated Alloy Steel







			2-56

			1/8"								82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


			3/16"								82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
			1/4"								82°	Standard	0.197"	0.064"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000




												3-48

						1/4"						82°	Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


						3/8"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1/2"	82°					Standard	0.226"	0.073"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000




												4-40

												3/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000


												1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
												5/16"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
												3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
												1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
												5/8"	82°	Standard	0.255"	0.083"	Fully Threaded	120,000	ASME B18.3	—	50	000000000	0000
												3/4"	82°	Standard	0.255"	0.083"	Fully Threaded	120,000	ASME B18.3	—	100	000000000	00000




	4-48

	1/4"												82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000


	3/8"												82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
	1/2"												82°	Standard	0.255"	0.083"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000




														5-40

														1/4"	82°	Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000


				3/8"	82°									Standard	0.281"	0.09"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	0000
				1/2"	82°									Standard	0.281"	0.09"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000




								6-32

								3/16"	82°					Undercut	0.307"	0.078"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


		1/4"						82°	Standard					0.307"	0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		5/16"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
		3/8"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		1/2"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		5/8"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
		3/4"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		1"						82°	Standard	0.307"				0.097"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000




								6-40

								1/4"	82°	Standard	0.307"			0.097"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000


								3/8"	82°	Standard	0.307"			0.097"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
								1/2"	82°	Standard	0.307"			0.097"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000




							8-32

							1/4"		82°	Undercut	0.359"			0.099"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000


							5/16"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
							3/8"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
							1/2"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
							5/8"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
							3/4"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
							7/8"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	100	000000000	00000
							1"		82°	Standard	0.359"			0.112"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
							1 1/4"		82°	Standard	0.359"			0.112"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	25	000000000	00000
							1 1/2"		82°	Standard	0.359"			0.112"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000




									8-36

									1/2"	82°	Standard	0.359"		0.112"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000


									3/4"	82°	Standard	0.359"		0.112"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
	1"								82°	Standard	0.359"	0.112"		Fully Threaded	130,000	ASTM F835	—	50	000000000	00000




										10-24

										3/8"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


										1/2"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				5/8"						82°	Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	0000
				3/4"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				7/8"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
				1"	82°					Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1 1/4"	82°					Standard	0.411"	0.127"	Fully Threaded	120,000	ASME B18.3	—	10	000000000	0000
				1 1/2"	82°					Standard	0.411"	0.127"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
				2"	82°					Standard	0.411"	0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000
				2 1/2"	82°					Standard	0.411"	0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000




										10-32

										1/4"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


		5/16"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASME B18.3, ASTM F835	—	50	000000000	00000
		3/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
		1/2"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		5/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	0000
		3/4"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
		7/8"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	50	000000000	00000
		1"	82°							Standard	0.411"	0.127"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
		1 1/4"	82°							Standard	0.411"	0.127"	Fully Threaded	120,000	ASME B18.3	—	25	000000000	00000
		1 1/2"	82°							Standard	0.411"	0.127"	Partially Threaded	130,000	ASTM F835	—	50	000000000	00000
		2"	82°							Standard	0.411"	0.127"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	10	000000000	0000




						12-24

						1/2"		82°		Standard	0.438"	0.134"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


						3/4"		82°		Standard	0.438"	0.134"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1"		82°		Standard	0.438"	0.134"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000




										1/4"-20

										3/8"	82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


1/2"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
5/8"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
3/4"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
7/8"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
1"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
1 1/8"							82°			Standard	0.531"	0.161"	Fully Threaded	120,000	ASME B18.3	—	10	000000000	0000
1 1/4"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
1 1/2"							82°			Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
1 3/4"							82°			Standard	0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	25	000000000	0000
2"	82°						Standard			0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000


2 1/4"	82°						Standard		0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
2 1/2"	82°						Standard		0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	0000
2 3/4"	82°						Standard		0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
3"	82°						Standard		0.531"	0.161"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
3 1/2"	82°						Standard		0.531"	0.161"	Partially Threaded	120,000	ASME B18.3	—	10	000000000	00000
4"	82°						Standard		0.531"	0.161"	Partially Threaded	120,000	ASME B18.3	—	10	000000000	00000




							1/4"-28

							3/8"		82°	Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


				1/2"			82°		Standard	0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				5/8"	82°		Standard		0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
				3/4"	82°		Standard		0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1"	82°		Standard		0.531"	0.161"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
				1 1/4"	82°		Standard		0.531"	0.161"	Fully Threaded	120,000	ASME B18.3	—	25	000000000	00000




							5/16"-18

							3/8"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000


							1/2"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
							5/8"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000
							3/4"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
							7/8"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
							1"		82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
		1 1/4"					82°		Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
		1 1/2"	82°				Standard		0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
		1 3/4"	82°				Standard		0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
		2"	82°				Standard		0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
		2 1/2"	82°				Standard		0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000


		3"	82°				Standard		0.656"	0.198"	Partially Threaded	130,000	ASTM F835	—	10	000000000	00000
		3 1/2"	82°				Standard		0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	0000
		4"	82°				Standard		0.656"	0.198"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	5	000000000	00000




						5/16"-24

						1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	0000


						3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	25	000000000	00000
						1"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
						1 1/4"	82°	Standard	0.656"	0.198"	Fully Threaded	120,000	ASME B18.3	—	10	000000000	0000
						1 1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000




								3/8"-16

								1/2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


								5/8"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
								3/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
								7/8"	82°	Standard	0.781"	0.234"	Fully Threaded	120,000	ASME B18.3	—	10	000000000	0000
								1"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
								1 1/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
								1 1/2"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
1 3/4"								82°	Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
2"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
2 1/4"	82°							Standard	0.781"	0.234"	Partially Threaded	120,000	ASME B18.3	—	5	000000000	0000
2 1/2"	82°							Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000


3"	82°							Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
3 1/2"	82°							Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	5	000000000	0000
4"	82°							Standard	0.781"	0.234"	Partially Threaded	120,000	ASME B18.3	—	5	000000000	00000
5"	82°							Standard	0.781"	0.234"	Partially Threaded	120,000	ASME B18.3	—	1	000000000	0000
6"	82°							Standard	0.781"	0.234"	Partially Threaded	120,000	ASME B18.3	—	1	000000000	0000




				3/8"-24

				3/4"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


				1"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000
				1 1/4"	82°			Standard	0.781"	0.234"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	0000
				1 1/2"	82°			Standard	0.781"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
				2"	82°			Standard	0.781"	0.234"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	0000




								7/16"-14

								3/4"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	0000


								1"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000
								1 1/4"	82°	Standard	0.844"	0.234"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	00000
								1 1/2"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000




								7/16"-20

								3/4"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000


								1"	82°	Standard	0.844"	0.234"	Fully Threaded	130,000	ASTM F835	—	10	000000000	00000




										1/2"-13

						3/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000


						1"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 1/4"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 1/2"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						1 3/4"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
						2"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						2 1/4"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	00000
						2 1/2"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
						3"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	0000
						3 1/2"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000
						4"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000


						5"	82°			Standard	0.938"	0.251"	Partially Threaded	130,000	ASME B18.3, ASTM F835	—	1	000000000	0000




										1/2"-20

										3/4"	82°	Standard	0.938"	0.251"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	0000


1"										82°	Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
1 1/2"	82°									Standard	0.938"	0.251"	Fully Threaded	130,000	ASTM F835	—	5	000000000	0000
2"	82°									Standard	0.938"	0.251"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	0000




										5/8"-11

										1"	82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000


										1 1/4"	82°	Standard	1.188"	0.324"	Fully Threaded	120,000	ASME B18.3	—	5	000000000	00000
				1 1/2"						82°	Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
				1 3/4"	82°					Standard	1.188"	0.324"	Fully Threaded	120,000	ASME B18.3	—	1	000000000	0000
				2"	82°					Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
				2 1/2"	82°					Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000
				3"	82°					Standard	1.188"	0.324"	Fully Threaded	130,000	ASTM F835	—	1	000000000	0000




										3/4"-10

										1 1/2"	82°	Standard	1.438"	0.396"	Fully Threaded	120,000	ASME B18.3	—	1	000000000	0000


		2"	82°							Standard	1.438"	0.396"	Fully Threaded	120,000	ASME B18.3	—	1	000000000	0000
		2 1/2"	82°							Standard	1.438"	0.396"	Fully Threaded	120,000	ASME B18.3	—	1	000000000	0000




										M2 × 0.4 mm

								4 mm		90°	Standard	4 mm	1.2 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	0000


								6 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
								8 mm	90°	Standard	4 mm	1.2 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000




										M2.5 × 0.45 mm

										5 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	0000


										6 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
										6 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	0000
										8 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
										8 mm	90°	Standard	5 mm	1.5 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	0000




						M3 × 0.5 mm

						5 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000


						6 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
						8 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
						10 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
						12 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	00000
						14 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
						16 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
						16 mm	90°					Standard	6 mm	1.7 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
18 mm						90°	Standard					6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
20 mm	90°					Standard	6 mm					1.7 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
20 mm	90°					Standard	6 mm					1.7 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000


22 mm	90°					Standard	6 mm					1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
25 mm	90°					Standard	6 mm					1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000




						M4 × 0.7 mm

						5 mm	90°					Standard	8 mm	2.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000


				6 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
				8 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
				10 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
				12 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
				16 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	ISO 10642	—	100	000000000	0000
				18 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
				20 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				20 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
				25 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000
				25 mm	90°	Standard	8 mm					2.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000


		30 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded					120,000	DIN 7991	—	50	000000000	0000
		30 mm	90°	Standard	8 mm	2.3 mm	Partially Threaded					170,000	DIN 7991	—	50	000000000	00000
		35 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded					120,000	DIN 7991	—	50	000000000	00000
		40 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded					120,000	DIN 7991	—	50	000000000	00000
		45 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded					120,000	DIN 7991	—	10	000000000	0000
		50 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded					120,000	DIN 7991	—	10	000000000	00000




				M5 × 0.8 mm

				8 mm	90°	Standard	10 mm	2.8 mm				Fully Threaded	120,000	DIN 7991	—	100	000000000	0000


				10 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	ISO 10642	—	100	000000000	0000
				12 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	ISO 10642	—	100	000000000	00000
				14 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	DIN 7991	—	100	000000000	00000
				14 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			170,000	DIN 7991	—	50	000000000	00000
				16 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	ISO 10642	—	100	000000000	0000
				18 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	DIN 7991	—	50	000000000	00000
				20 mm	90°	Standard	10 mm	2.8 mm	Partially Threaded			120,000	DIN 7991	—	100	000000000	00000
				22 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	DIN 7991	—	50	000000000	00000
				25 mm	90°	Standard	10 mm	2.8 mm	Partially Threaded			120,000	ISO 10642	—	100	000000000	00000
				30 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded			120,000	DIN 7991	—	50	000000000	00000


				30 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
				35 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
				40 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				40 mm	90°	Standard	10 mm	2.8 mm	Partially Threaded	170,000	DIN 7991	—	50	000000000	00000
				45 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				50 mm	90°	Standard	10 mm	2.8 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	0000




						M6 × 1 mm

						8 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	100	000000000	00000


						8 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
						10 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
						10 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	0000
12 mm						90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	0000
14 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
14 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
16 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	0000
18 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
18 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
20 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	0000


22 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
25 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	120,000	ISO 10642	—	50	000000000	0000
30 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	120,000	ISO 10642	—	50	000000000	0000
35 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
35 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
40 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	120,000	DIN 7991	—	50	000000000	00000
45 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
50 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
50 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	170,000	DIN 7991	—	25	000000000	0000
55 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000


60 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
60 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	170,000	DIN 7991	—	25	000000000	00000
65 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
70 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
70 mm	90°					Standard	12 mm	3.3 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	0000
80 mm	90°					Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000




		M8 × 1.25 mm

		10 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000


		10 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
		12 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
		12 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	170,000	DIN 7991	—	50	000000000	00000
		14 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
		16 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
		18 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
		18 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	170,000	DIN 7991	—	25	000000000	0000
		20 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
		22 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		25 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000


		30 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000
		35 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		35 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	170,000	DIN 7991	—	25	000000000	00000
		40 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
		45 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	00000
		50 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
		50 mm	90°			Standard	16 mm	4.4 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	0000
		60 mm	90°	Standard		16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
		60 mm	90°	Standard	16 mm	4.4 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	0000
		65 mm	90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


		70 mm	90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
		70 mm	90°	Standard	16 mm	4.4 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	00000
		80 mm	90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
		100 mm	90°	Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000




				M10 × 1.5 mm

				12 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000


				16 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				16 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	170,000	DIN 7991	—	25	000000000	00000
				20 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
				25 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
				30 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
				35 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	170,000	DIN 7991	—	10	000000000	0000
				40 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000
				45 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				50 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
				60 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


				60 mm	90°	Standard	20 mm	5.5 mm	Partially Threaded	170,000	DIN 7991	—	10	000000000	00000
				65 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				70 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				80 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				90 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
				100 mm	90°	Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000




				M12 × 1.75 mm

				20 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000


				20 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	170,000	DIN 7991	—	10	000000000	0000
				25 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				25 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	170,000	DIN 7991	—	10	000000000	00000
				30 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				30 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	170,000	DIN 7991	—	10	000000000	00000
				35 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	0000
				40 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				40 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	170,000	DIN 7991	—	10	000000000	00000
				45 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000
				50 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	10	000000000	00000


				50 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	170,000	DIN 7991	—	5	000000000	0000
				55 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				60 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				70 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	0000
				80 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000




						M16 × 2 mm

						25 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000


						30 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
						35 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						40 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
						45 mm	90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		50 mm				90°	Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	5	000000000	00000
		55 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		60 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		70 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000
		80 mm	90°			Standard	30 mm	7.5 mm	Fully Threaded	120,000	DIN 7991	—	1	000000000	0000


		Blue-Dyed Zinc-Plated Alloy Steel







								M3 × 0.5 mm

								5 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000


								6 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
								8 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
								10 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
								12 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
								16 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
								20 mm	90°	Standard	6 mm	1.7 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000
								25 mm	90°	Standard	6 mm	1.7 mm	Partially Threaded	120,000	DIN 7991	—	25	000000000	00000




								M4 × 0.7 mm

								6 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	25	000000000	0000


								8 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
								10 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	0000
								12 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	0000
								16 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	0000
								20 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
								25 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991	—	50	000000000	00000
								30 mm	90°	Standard	8 mm	2.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000




										M5 × 0.8 mm

										8 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000


										10 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
										12 mm	90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	0000
				16 mm						90°	Standard	10 mm	2.8 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	00000
				20 mm	90°					Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
				25 mm	90°					Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
				30 mm	90°					Standard	10 mm	2.8 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000




										M6 × 1 mm

										10 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000


										12 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	50	000000000	00000
										16 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	00000
										20 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	ISO 10642	—	50	000000000	00000
										25 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000
										30 mm	90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
		35 mm								90°	Standard	12 mm	3.3 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
		40 mm	90°							Standard	12 mm	3.3 mm	Partially Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
		45 mm	90°							Standard	12 mm	3.3 mm	Partially Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
		50 mm	90°							Standard	12 mm	3.3 mm	Partially Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000




						M8 × 1.25 mm

						12 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000


						16 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	0000
						20 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
						25 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
						30 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
						35 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	25	000000000	00000
						40 mm	90°			Standard	16 mm	4.4 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000
						50 mm	90°			Standard	16 mm	4.4 mm	Partially Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000




						M10 × 1.5 mm

						16 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000


						20 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000
						25 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000
						30 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000
						35 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
						40 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
						50 mm	90°			Standard	20 mm	5.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000




								M12 × 1.75 mm

								20 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	0000


								25 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
								30 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	0000
								35 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	10	000000000	00000
								40 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
								45 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000
								50 mm	90°	Standard	24 mm	6.5 mm	Fully Threaded	120,000	DIN 7991, ISO 10642	—	5	000000000	00000


				Cadmium-Plated Alloy Steel







										4-40

										1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASTM F835	MS24667-1	1	000000000	0000


										3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASTM F835	MS24667-2	1	000000000	0000
										1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASTM F835	MS24667-3	1	000000000	0000
										3/4"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASTM F835	MS24667-5	1	000000000	0000




										6-32

										3/8"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASTM F835	MS24667-8	1	000000000	0000


										1/2"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASTM F835	MS24667-9	1	000000000	0000
										5/8"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASTM F835	MS24667-10	1	000000000	00000
										3/4"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASTM F835	MS24667-11	1	000000000	0000




												8-32

3/8"												82°	Standard	0.359"	0.112"	Fully Threaded	140,000	ASTM F835	MS24667-13	1	000000000	0000


1/2"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASTM F835	MS24667-14	1	000000000	0000
5/8"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASTM F835	MS24667-15	1	000000000	0000




												1/4"-20

												5/8"	82°	Standard	0.531"	0.161"	Fully Threaded	140,000	ASTM F835	MS24667-29	1	000000000	0000


												3/4"	82°	Standard	0.531"	0.161"	Fully Threaded	140,000	ASTM F835	MS24667-30	1	000000000	0000
												1"	82°	Standard	0.531"	0.161"	Fully Threaded	140,000	ASTM F835	MS24667-31	1	000000000	00000




												5/16"-18

												1"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASTM F835	MS24667-41	1	000000000	00000




														3/8"-16

														1"	82°	Standard	0.781"	0.234"	Fully Threaded	140,000	ASTM F835	MS24667-52	1	000000000	00000


				Alloy Steel







														3/8"-16

														6 1/2"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000


														7"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




														3/8"-24

														4"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000


														5"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
														5 1/2"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
														6"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
														7"	82°	Standard	0.781"	0.234"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




														1/2"-13

														14"	82°	Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																1/2"-20

4"	82°															Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000


6"	82°															Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
6 1/2"	82°															Standard	0.938"	0.251"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																5/8"-11

						10"										82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																5/8"-18

												4"				82°	Standard	1.188"	0.324"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																3/4"-16

				5"												82°	Standard	1.438"	0.396"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




								7/8"-9

								4"	82°							Standard	1.688"	0.468"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																7/8"-14

																1 1/2"	82°	Standard	1.688"	0.468"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


		3"	82°													Standard	1.688"	0.468"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




																1"-8

																11 1/2"	82°	Standard	1.938"	0.54"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000




										1 1/4"-7

										3 1/2"	82°							Standard	2.438"	0.683"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000




																		1 1/4"-12

														3 1/2"	82°			Standard	2.438"	0.683"	Fully Threaded	130,000	ASTM F835	—	1	000000000	00000


														4"	82°			Standard	2.438"	0.683"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000
														4 1/2"	82°			Standard	2.438"	0.683"	Partially Threaded	130,000	ASTM F835	—	1	000000000	00000

Steel Torx Flat Head Screws

Get a grip with less slip. With a deep six-lobe opening, these screws prevent slipping and stripping drives. Also known as star drives, they withstand more torque than slotted, Phillips, and hex drives.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				4-40

				1/4"	82°	Undercut	0.212"	0.047"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	000000


				5/16"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				3/8"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				5/8"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				3/4"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				1"	82°	Standard	0.212"	0.067"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000




						6-32

						1/4"	82°	Undercut	0.262"	0.059"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000


						5/16"	82°	Undercut	0.262"	0.059"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						3/8"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						5/8"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						3/4"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						1"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
						1 1/4"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
						1 1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000




								8-32

								1/4"	82°	Undercut	0.312"	0.07"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000


								3/8"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
								1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
								5/8"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
								3/4"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
								1"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
								1 1/4"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
								1 1/2"	82°	Standard	0.312"	0.1"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000




										10-24

										3/8"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000


										1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
										5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
										3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
										1"	82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
1 1/4"										82°	Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
1 1/2"	82°									Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
2 1/2"	82°									Standard	0.362"	0.116"	Partially Threaded	60,000	ASME B18.6.3	25	000000000	0000




		10-32

		3/8"	82°							Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000


		1/2"	82°							Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
		5/8"	82°							Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
		3/4"	82°							Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000
		1"	82°							Standard	0.362"	0.116"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	0000




										1/4"-20

				1/2"	82°					Undercut	0.477"	0.107"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	00000


				5/8"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	00000
				3/4"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	100	000000000	00000
				1"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	00000
				1 1/4"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	50	000000000	00000
				1 1/2"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	10	000000000	0000
				2"	82°					Standard	0.477"	0.153"	Fully Threaded	60,000	ASME B18.6.3	10	000000000	00000
				3"	82°					Standard	0.477"	0.153"	Partially Threaded	60,000	ASME B18.6.3	10	000000000	00000




										5/16"-18

						3/4"				82°	Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000


						1"	82°			Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
						1 1/4"	82°			Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	0000
						1 1/2"	82°			Standard	0.597"	0.191"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000




										3/8"-16

										3/4"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000


										1"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000
								1 1/4"		82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000
								1 1/2"	82°	Standard	0.717"	0.23"	Fully Threaded	60,000	ASME B18.6.3	25	000000000	00000




										M2 × 0.4 mm

										3 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000


										4 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	100	000000000	00000
										5 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
										6 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
										8 mm	90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
10 mm										90°	Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
12 mm	90°									Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
16 mm	90°									Standard	3.8 mm	1.2 mm	Fully Threaded	—	ISO 14581	50	000000000	00000




										M2.5 × 0.45 mm

										3 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	100	000000000	00000


										4 mm	90°	Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
		5 mm								90°	Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	100	000000000	00000
		8 mm	90°							Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
		10 mm	90°							Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
		12 mm	90°							Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
		16 mm	90°							Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
		20 mm	90°							Standard	4.7 mm	1.5 mm	Fully Threaded	—	ISO 14581	50	000000000	0000




										M3 × 0.5 mm

										4 mm	90°	Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000


										5 mm	90°	Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				6 mm						90°	Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				8 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				10 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
				12 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				16 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				20 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
				25 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
				30 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	25	000000000	0000
				35 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	25	000000000	0000


				40 mm	90°					Standard	5.5 mm	1.65 mm	Fully Threaded	—	ISO 14581	25	000000000	0000




						M4 × 0.7 mm

						5 mm	90°			Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	0000


						6 mm	90°			Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
						8 mm	90°			Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
						10 mm	90°			Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
						12 mm	90°			Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	0000
						16 mm	90°	Standard		8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
						20 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
						25 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
						30 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
						35 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
						40 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000


						45 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
						50 mm	90°	Standard	8.4 mm	2.7 mm	Fully Threaded	—	ISO 14581	10	000000000	0000




								M5 × 0.8 mm

6 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000


8 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
10 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	50	000000000	00000
12 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	0000
16 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	0000
20 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
25 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
30 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
35 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
40 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
45 mm	90°							Standard	9.3 mm	2.7 mm	Fully Threaded	—	ISO 14581	10	000000000	0000




		M6 × 1 mm

		8 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	25	000000000	0000


		10 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	25	000000000	0000
		12 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
		16 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
		20 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	25	000000000	00000
		25 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
		30 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
		35 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
		40 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
		45 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	00000
		50 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	00000


		60 mm	90°					Standard	11.3 mm	3.3 mm	Fully Threaded	—	ISO 14581	10	000000000	00000




				M8 × 1.25 mm

				12 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	10	000000000	0000


				16 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	10	000000000	0000
				20 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	10	000000000	00000
				25 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	10	000000000	00000
				30 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	10	000000000	00000
				35 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	5	000000000	0000
				45 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	5	000000000	0000
				50 mm	90°			Standard	15.8 mm	4.65 mm	Fully Threaded	—	ISO 14581	5	000000000	0000

Thread-Locking Steel Hex-Drive Flat Head Screws

Keep parts from coming loose on motors and other machinery that experience mild vibration. These screws have nylon-patch threadlocker bonded to the threads, saving you the time and mess of adding it yourself. They're made of alloy steel, so they have nearly twice the tensile strength of other hex-drive options. With six contact points, the hex drive withstands more torque than slotted and Phillips to securely grip your driver without slipping and stripping the drive.

Length is measured from the top of the head.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Threadlocker Type	Threadlocker Temp. Range, ° F	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Alloy Steel







				2-56

				1/4"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	000000


				3/8"	82°	Standard	0.197"	0.064"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	00000




						4-40

						1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


						3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
						1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000




								6-32

								1/4"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


								3/8"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
								1/2"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
								5/8"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
								3/4"	82°	Standard	0.307"	0.097"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000




										8-32

										1/4"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


										3/8"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
										1/2"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
										5/8"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
										3/4"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
										1"	82°	Standard	0.359"	0.112"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000




												10-24

												1/4"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000


												3/8"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
												1/2"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
												5/8"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
												3/4"	82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
1"												82°	Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000




		10-32

		1/4"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000


		3/8"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
		1/2"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	0000
		5/8"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
		3/4"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
		1"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
		1 1/4"	82°									Standard	0.411"	0.127"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
		1 1/2"	82°	Standard								0.411"	0.127"	Partially Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000




				1/4"-20

				3/8"	82°							Standard	0.531"	0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


				1/2"	82°							Standard	0.531"	0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				5/8"	82°							Standard	0.531"	0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				3/4"	82°	Standard						0.531"	0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				7/8"	82°	Standard	0.531"					0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				1"	82°	Standard	0.531"					0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				1 1/4"	82°	Standard	0.531"					0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				1 1/2"	82°	Standard	0.531"					0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
				1 3/4"	82°	Standard	0.531"					0.161"	Partially Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
				2"	82°	Standard	0.531"					0.161"	Partially Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000




						1/4"-28

						1/2"	82°					Standard	0.531"	0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


						5/8"	82°	Standard	0.531"			0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
						3/4"	82°	Standard	0.531"			0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
						1"	82°	Standard	0.531"			0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
						1 1/4"	82°	Standard	0.531"			0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
						1 1/2"	82°	Standard	0.531"			0.161"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000




								5/16"-18

								3/8"	82°			Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000


								1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								5/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								7/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								1"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								1 1/8"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	00000
								1 1/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								1 1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								2"	82°	Standard	0.656"	0.198"	Partially Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000




								5/16"-24

								3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


								1"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000
								1 1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000




										3/8"-16

		3/4"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	25	000000000	00000


		7/8"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
		1"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
		1 1/8"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	00000
		1 1/4"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
		1 1/2"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
		1 3/4"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
		2"	82°							Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	00000




										3/8"-24

										3/4"	82°	Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000


				1"	82°					Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000
				1 1/4"	82°					Standard	0.781"	0.234"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	10	000000000	0000




										1/2"-13

										3/4"	82°	Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000


										1"	82°	Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000
						1 1/4"				82°	Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000
						1 1/2"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000
						1 3/4"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000
						2"	82°			Standard	0.938"	0.251"	Fully Threaded	130,000	Nylon Patch	-65 to 250	ASTM F835	5	000000000	0000

Steel Torx Plus Flat Head Screws

The strongest Torx Plus flat head screws we offer. They're made of alloy steel, so they have nearly twice the tensile strength of other screws. With larger lobes than Torx drives, Torx Plus withstands even more torque without slipping and stripping the drive.

Length is measured from the top of the head.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Alloy Steel







				2-56

				3/16"	82°	Standard	0.197"	0.064"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	00000


				1/4"	82°	Standard	0.197"	0.064"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000
				3/8"	82°	Standard	0.197"	0.064"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000




						4-40

						3/16"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000


						1/4"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						5/16"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000
						3/8"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						1/2"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						5/8"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	00000
						3/4"	82°	Standard	0.255"	0.083"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000




								5-40

								1/4"	82°	Standard	0.281"	0.09"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000


								3/8"	82°	Standard	0.281"	0.09"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
								1/2"	82°	Standard	0.281"	0.09"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000




										6-32

										1/4"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


										5/16"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000
										3/8"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										1/2"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										5/8"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										3/4"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										1"	82°	Standard	0.307"	0.097"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	00000




												8-32

												5/16"	82°	Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	0000


3/8"												82°	Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
1/2"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
5/8"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	00000
3/4"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	0000
1"	82°											Standard	0.359"	0.112"	Fully Threaded	140,000	ASME B18.3, ASTM F835	100	000000000	00000




		10-24

		1/2"	82°									Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


		5/8"	82°									Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
		3/4"	82°									Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
		1"	82°									Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000




				10-32

				3/8"	82°							Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


				1/2"	82°							Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
				5/8"	82°							Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
				3/4"	82°							Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
				1"	82°							Standard	0.411"	0.127"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	0000




						1/4"-20

						1/2"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


						5/8"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						3/4"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						1"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						1 1/4"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						1 1/2"	82°					Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
						2"	82°					Standard	0.531"	0.161"	Partially Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000




								1/4"-28

								1/2"	82°			Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


								5/8"	82°			Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
								3/4"	82°			Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
								1"	82°			Standard	0.531"	0.161"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000




										5/16"-18

										1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000


										5/8"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										3/4"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										1"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
										1 1/4"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000
										1 1/2"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000
2"										82°	Standard	0.656"	0.198"	Partially Threaded	140,000	ASME B18.3, ASTM F835	50	000000000	00000




										5/16"-24

										1"	82°	Standard	0.656"	0.198"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000




		3/8"-16

		1/2"	82°									Standard	0.781"	0.234"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000


		3/4"	82°									Standard	0.781"	0.234"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000
		1"	82°									Standard	0.781"	0.234"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000
		1 1/2"	82°									Standard	0.781"	0.234"	Fully Threaded	140,000	ASME B18.3, ASTM F835	25	000000000	00000
		2"	82°									Standard	0.781"	0.234"	Fully Threaded	140,000	ASME B18.3, ASTM F835	10	000000000	00000




												M3 × 0.5 mm

				5 mm	90°							Standard	6.72 mm	1.86 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000


				6 mm	90°							Standard	6.72 mm	1.86 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
				8 mm	90°							Standard	6.72 mm	1.86 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
				10 mm	90°							Standard	6.72 mm	1.86 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
				12 mm	90°							Standard	6.72 mm	1.86 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000




												M4 × 0.7 mm

												6 mm	90°	Standard	8.94 mm	2.48 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	0000


						8 mm	90°					Standard	8.94 mm	2.48 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	0000
						10 mm	90°					Standard	8.94 mm	2.48 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
						12 mm	90°					Standard	8.94 mm	2.48 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
						16 mm	90°					Standard	8.94 mm	2.48 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000




												M5 × 0.8 mm

								8 mm				90°	Standard	11.2 mm	3.1 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000


								10 mm	90°			Standard	11.2 mm	3.1 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
								12 mm	90°			Standard	11.2 mm	3.1 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
								16 mm	90°			Standard	11.2 mm	3.1 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000
								20 mm	90°			Standard	11.2 mm	3.1 mm	Fully Threaded	140,000	ASME B18.3.5M	100	000000000	00000




												M6 × 1 mm

												12 mm	90°	Standard	13.44 mm	3.72 mm	Fully Threaded	140,000	ASME B18.3.5M	50	000000000	00000


16 mm	90°											Standard	13.44 mm	3.72 mm	Fully Threaded	140,000	ASME B18.3.5M	50	000000000	00000
20 mm	90°											Standard	13.44 mm	3.72 mm	Fully Threaded	140,000	ASME B18.3.5M	50	000000000	00000
25 mm	90°											Standard	13.44 mm	3.72 mm	Fully Threaded	140,000	ASME B18.3.5M	50	000000000	00000
30 mm	90°											Standard	13.44 mm	3.72 mm	Fully Threaded	140,000	ASME B18.3.5M	50	000000000	00000

Tamper-Resistant Torx Plus Steel Flat Head Screws

Our strongest tamper-resistant Torx Plus flat head screws. These screws have a pin in the drive that you can only turn with a tamper-resistant Torx Plus or tamper-resistant pentalobe driver. With a deep five-lobe opening, the drive withstands high torque and prevents the driver from slipping and stripping the drive. They're made of alloy steel, so they have nearly twice the tensile strength of other screws.

Length is measured from the top of the head.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Screwdriver Bits—Turn screws by hand for more control and less chance of overtightening compared to power tools.

	Screws											Screwdriver Bits
				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.		Each
Black-Oxide Alloy Steel







				1/4"-20

				3/8"	82°	Undercut	0.507"	0.107"	Fully Threaded	160,000	ASME B18.3	25	000000000	000000	0000000	00000


				1/2"	82°	Undercut	0.507"	0.107"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	0000000	0000
				3/4"	82°	Standard	0.507"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	0000000	0000
				1"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	0000000	0000
				1 1/4"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	0000000	0000

Tamper-Resistant Torx Steel Flat Head Screws

Our strongest tamper-resistant Torx flat head screws. These screws have a security pin in the drive that you can only turn with a tamper-resistant Torx driver. Also known as pin-in-Torx, the drive has a deep six-lobe opening that withstands high torque without the driver slipping and stripping the drive. They're made of alloy steel, so they have nearly twice the tensile strength of other screws.

Length is measured from the top of the head.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

L-Keys—Turn screws by hand for more control and less chance of overtightening compared to power tools.

Power Tool Bits—Pair these bits with your power tools to turn screws more quickly than manual tools.

	Screws											L-Keys		Power Tool Bits
				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.		Each		Each
Black-Oxide Alloy Steel







				1/4"-20

				3/8"	82°	Undercut	0.507"	0.107"	Fully Threaded	160,000	ASME B18.3	25	000000000	000000	00000000	00000	0000000	00000


				1/2"	82°	Undercut	0.507"	0.107"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000
				5/8"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000
				3/4"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000
				1"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000
				1 1/2"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000
				2"	82°	Standard	0.531"	0.161"	Fully Threaded	160,000	ASME B18.3	25	000000000	00000	00000000	0000	0000000	0000

Steel Hex-Drive Flat Head Screw Assortments

With a range of sizes on hand, you can use these assortments to fasten a variety of machinery and equipment. They're made of alloy steel, so they have nearly twice the tensile strength of other screws. With six contact points, the hex drive withstands more torque than slotted and Phillips to securely grip your driver without slipping and stripping the drive.

Length is measured from the top of the head.

	Flat Head Screws Included	Specs. Met	Container Type		Each
Black-Oxide Alloy Steel



	300	1/4"-20 × 1" Lg. (25 Pieces), 1/4"-20 × 1/2" Lg. (25 Pieces), 1/4"-20 × 3/4" Lg. (25 Pieces), 5/16"-18 × 1" Lg. (25 Pieces), 5/16"-18 × 3/4" Lg. (25 Pieces), 6-32 × 1/2" Lg. (25 Pieces), 6-32 × 3/8" Lg. (25 Pieces), 8-32 × 1/2" Lg. (25 Pieces), 8-32 × 3/8" Lg. (25 Pieces), 10-32 × 1/2" Lg. (25 Pieces), 10-32 × 3/4" Lg. (25 Pieces), 10-32 × 3/8" Lg. (25 Pieces)	ASTM F835	Plastic Box	000000000	000000


	258	M4 × 10 mm Lg. (25 Pieces), M4 × 16 mm Lg. (25 Pieces), M4 × 20 mm Lg. (25 Pieces), M4 × 25 mm Lg. (25 Pieces), M5 × 16 mm Lg. (25 Pieces), M5 × 20 mm Lg. (25 Pieces), M5 × 25 mm Lg. (10 Pieces), M5 × 30 mm Lg. (10 Pieces), M6 × 16 mm Lg. (10 Pieces), M6 × 20 mm Lg. (10 Pieces), M6 × 25 mm Lg. (10 Pieces), M6 × 30 mm Lg. (10 Pieces), M8 × 20 mm Lg. (10 Pieces), M8 × 25 mm Lg. (10 Pieces), M8 × 30 mm Lg. (10 Pieces), M8 × 40 mm Lg. (10 Pieces)	DIN 7991	Plastic Box	000000000	000000