The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface.

To suit a range of applications, these sets include hammers in a range of sizes and weights. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

Demolish material, form metal, and drive punches, chisels, and masonry drills.

Drive nails with the flat, steel face and remove them with the claw on the other end of the head.

Similar to a sledge hammer but with a longer, slimmer head, these tools are used to drive spikes or punch out pins. They're also known as spike mauls.

Pry, shape, chip, and cut masonry and stone.

Also known as body and fender tools, these hammers are excellent for forming and repairing dents in sheet metal components.

These palm-sized tools fit in tight spaces and use air to deliver a powerful strike where swinging a hammer is not possible. Replace faces when they are worn, or switch to a face with a different material or hardness.

Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills.

Drive these wedges into the handle of your hammer or axe to create a snug fit for the head.

Place on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.

Also known as United States Navy (U.S.N.)-style chisels, these tools have an oval or round collar on the shank.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

These chisels have a combination round and hex shank that works with spline-drive rotary hammers.

Also known as jumbo shank chisels.

Use with electric and air-powered pavement-breaker hammers.

Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter.

With no internal springs to break, these tools provide consistent performance.

The included adapter lets you use chisels in these scalers. Change the blows-per-minute by varying the pressure on the speed control.

Rivet setters are required for standard and heavy duty air-powered hammers to drive rivets.

Also known as zip guns, use these air hammers with a rivet setter and a bucking bar to install solid rivets.

A hammer and punch in one, this tool knocks out pins, rivets, and bolts.