These steel screws are zinc plated to resist corrosion in wet environments.

A Torx drive has more points of contact than Phillips, slotted, and square drives, allowing you to apply extra force with less slippage or damage to the recess.

A flange under the head distributes holding pressure and reduces the risk of crushing thin metal.

A free-rotating, permanently attached washer distributes holding pressure over a wider area than a flange and remains stationary to prevent scratching the material surface as you tighten the screw.

These steel screws have a black-oxide finish to resist corrosion in dry environments.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

Made from 18-8 stainless steel, these screws are chemical resistant.

These steel screws are zinc plated to resist corrosion in wet environments.

Also known as Fastite screws, these offer more thread engagement in 0.028" to 0.063" thick sheets to prevent overtightening and damaging threads.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Able to penetrate overlapping sheets, these screws have a secure hold in wood.

410 stainless steel is strong, wear resistant, and mildly chemical resistant.

These screws have the strength of 410 stainless steel with added corrosion resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

The extra-wide truss head distributes holding pressure to reduce the risk of crushing thin metal.

These steel screws save you time and effort by drilling their own holes and fastening in a single operation.

A decorative rounded top provides a finished appearance.

These steel screws are available with corrosion resistant finishes. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Known for their strength, these alloy steel screws are coated to provide corrosion resistance in wet environments.

Beveled under the head for use in countersunk holes.

Serrations under the head act as a brake to prevent overtightening and damaging threads.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

The green color identifies these as grounding screws. They have a flange that provides a wide flat surface for making solid electrical connections.

The triangular shank presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.

These screws have a hex head for a secure grip with a wrench.

These steel screws have a black-oxide or zinc-plated finish to resist corrosion.

Press threads into plastic to create a strong hold. Use a wrench, hex socket bit, or nutdriver to securely grip the hex head and tighten these screws.

These steel screws have alternating high and low threads to minimize cracking and splitting in brittle material such as phenolic and glass-filled plastic.

These steel screws are zinc plated to resist corrosion in wet environments.

These 410 stainless steel screws are more corrosion resistant than ultra-corrosion-resistant coated steel screws.

These blue and silver ultra-corrosion-resistant coated steel screws stand up to wet environments.

With more points of contact than Phillips-, slotted-, and square-drive screws, you can firmly press these Torx-drive screws into wood without stripping them or damaging the recess—their threads create a tight hold.

These steel screws are zinc plated to resist corrosion in wet environments.

Drive the pointed tip of these screws into soft material, such as wood and drywall. They are also known as lag bolts.

18-8 stainless steel screws have good chemical resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

These 316 stainless steel screws have excellent resistance to chemicals and salt water.

These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation.

Thread-forming screws press threads into drilled holes for a tight vibration-resistant assembly.

These steel screws are zinc plated to resist corrosion in wet environments.

Screws are beveled under the head for use in countersunk holes.

Because these steel screws cut threads into drilled holes as they’re turned, they require less driving torque and cause less stress on material than thread-forming screws. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting boards.

Often used for drawer slides and cabinet hardware, these screws—also known as Euro and Type B screws—create a strong hold in small, shallow holes in wood.

Ribs under the head act as a brake to prevent over-tightening and damaging threads.

Alternating high and low threads minimize driving torque and allow the screw to hold more material between threads for a stronger hold and better strip-resistance than standard drywall screws for wood.

Hold sheets of drywall together until glue sets

A drill point powers through metal up to 0.105" thick.

These square-drive screws have a drill point that powers through drywall and into metal studs up to 0.105" thick. Heads are one-third smaller than those of other drywall screws.

These screws have a head that's one-third smaller than other drywall screws. Use them to attach drywall to metal studs up to 0.036" thick.