Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.

These metric nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These metric nuts meet JIS (Japanese Industrial Standard) B1181.

About 25% stronger than medium-strength steel nuts, these nuts are comparable in strength to Class 10.9 nuts.

Choose these nuts for their adherence to strict military standards for material and construction.

These nuts come with a traceable lot number and a physical and chemical test report.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They’re Grade 5 steel, so you can used these inch-sized nuts for most fastening applications.

Made from Grade 2 steel, these nuts should be used for light duty fastening applications, such as securing access panels.

Comparable in strength to Class 12.9 bolts.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These Class 10 nuts are about 25% stronger than medium-strength steel extra-wide hex nuts.

50% taller than standard hex nuts, these metric nuts provide a larger gripping area for installation with a wrench.

Use these nuts for light duty fastening applications, such as securing access panels.

A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes.

Get a grip on metric bolts exposed to vibration, wear, and changes in temperature. These metric locknuts have a nylon insert that holds onto bolts without damaging their threads.

Choose these locknuts for their adherence to strict military standards for material and construction. They’re low-strength steel, so they should be used for fastening panels and other light duty fastening applications.

Choose these locknuts for their adherence to strict military standards for material and construction.

Grade 5 locknuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut.

Use these locknuts for light duty fastening applications, such as securing access panels.

These metric locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.

These locknuts have a curved washer that acts as a spring for easy installation and mild vibration resistance. The smooth rim makes them less likely to scratch materials when tightened than locknuts with a tooth lock washer.

These metric locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

About half the strength of medium-strength steel locknuts, these are for light duty fastening applications, such as securing access panels.

These Grade 8 locknuts are about three times stronger than low-strength steel distorted-thread locknuts.

Use these locknuts for light duty fastening applications, such as securing access panels.

Threads at the top of these metric locknuts expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts.

Known for their strength, these steel locknuts are cadmium plated to resist corrosion in wet environments.

Known for their strength, these steel locknuts are cadmium plated to resist corrosion in wet environments.

Also known as castle nuts, secure these nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance.

The metric steel insert grips the threads and lifts away from the nut body when installed, isolating the insert from the nut’s load to resist spinoff caused by vibration.

These locknuts are suitable for fastening most machinery and equipment.

Strong enough for use in most machinery and equipment, these medium-strength metric nuts have serrations on the underside of the flange. The serrations prevent the nuts from loosening in applications with mild vibration.

These nuts are about 25% stronger than medium-strength steel flange locknuts.

Grade F nuts are comparable in strength to Grade 5 bolts.

These flange locknuts are comparable in strength to Grade 8 bolts.

Grip metric bolts more securely than nylon-insert flange locknuts—the irregularly shaped threads on these locknuts hold extra tight. They resist vibration and sudden shocks, even after multiple uses.

Also known as collar nuts, these metric nuts have a flange that distributes pressure across the surface, so you don't need a washer. Made of high-strength Class 10 steel, they’re about 25% stronger than medium-strength steel flange nuts.

No need for a washer—these metric medium-strength steel nuts have a flange that distributes pressure across its surface the way a washer does. Made of medium-strength, Class 8 steel, they’re suitable for fastening most machinery and equipment.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

For light duty applications, choose these metric-sized coupling nuts.

Made from Grade 8 steel, these nuts are about 25% stronger than medium-strength steel coupling nuts. Furnished in inch thread sizes.

Comparable in strength to Grade 9 bolts, these coupling nuts are about 20% stronger than high-strength steel coupling nuts. Available in inch thread sizes.

Use the sight hole to check for proper thread engagement.

These metric nuts are about half the strength of medium-strength steel cap nuts. Use them in light duty fastening applications, such as securing access panels.

These nuts are about 25% stronger than medium-strength steel cap nuts.

Known for their strength, these steel cap nuts have a black-oxide finish to resist corrosion in dry environments.

A nylon insert on these metric nuts prevents vibration from loosening them, and a domed head protects the threads at the end of the bolt from damage and debris.

Attach these metric slip-on nuts at any point on a threaded rod for quick installation.