As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Choose these washers for their adherence to strict military standards for material and construction.

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Choose these washers for their adherence to strict military standards for material and construction.

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Also known as NORD-LOCK® washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.