With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All European plugs are compatible with any of the European sockets, regardless of the pipe size or barbed hose ID. Made of zinc-plated steel, all are strong and durable, have fair corrosion resistance, and should be used primarily in noncorrosive environments.

Sockets have a shut-off valve that stops the flow when the coupling is separated, so air won’t leak from the line. They are push-to-connect style. To connect, push the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects. The sleeve is made of zinc-plated brass, which has better corrosion resistance than zinc-plated steel.

Manifolds give you a centralized and mounted location for plugging in your air tool line.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

For technical drawings and 3-D models, click on a part number.

A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All Japanese plugs are compatible with any of the Japanese sockets, regardless of the pipe size or barbed hose ID. Plugs and sockets are zinc-plated steel, which is strong and durable. They have fair corrosion resistance, so they should be used primarily in dry environments.

One-outlet manifolds create a connection point between two air lines, giving you a spot to plug in power tools away from your air compressor. Manifolds with two or more outlets split air into multiple lines to supply multiple tools or stations.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a line. All ARO plugs are compatible with any of the ARO sockets of the same coupling size, regardless of the pipe size or barbed hose ID.

Sockets have a shut-off valve that stops the flow when the coupling is separated, so air won’t leak from the line.

Push-to-connect sockets are easier to connect than sleeve-lock sockets. Connect by pushing the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects.

Manifolds give you a centralized and mounted location for plugging in your air tool line.

Steel is stronger and more durable than other metals. Zinc-plated steel has fair corrosion resistance and should be used primarily in dry environments.Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

For technical drawings and 3-D models, click on a part number.

Mount valves to a single-station base or to a manifold, which allows a single pressure source for multiple valves, then add or remove valves as your needs change. Valves with the same style can be used on the same manifold. For example, you can put a Style B, 2-position, spring-return valve and a Style B, 3-position, solenoid-return valve on the same manifold.

Station plates cover unused manifold ports.

For technical drawings and 3-D models, click on a part number.

Also known as block and bleed valves, these have a vent port that allows you to remove instrumentation equipment attached to the valve without depressurizing your line. Turn the handle to shut off flow and remove the vent port plug to drain liquid trapped in the valve. Valves adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Metal-to-metal seats resist temperature fluctuations.

Bubble-tight soft seats provide a tighter seal than metal-to-metal seats when the valve is completely closed.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers. They include one faucet and can fit up to three, so you can access different types of oil at a single centralized point.

Stations with a meter measure oil as it's dispensed.

Add faucets to oil dispensing stations for increased utility.

Lubricate multiple points from a single location. Dispense grease into the grease fittings. Use the compression fittings on the outlets to connect tubing (not included) between the grease fittings and lubrication points.

Zinc-plated steel manifolds have mild corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Connect up to five rams to a single pump. Includes plugs to cover ports not in use.

For technical drawings and 3-D models, click on a part number.