A slim head and long, narrow jaws fit into tight spaces.

The bottom jaw is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Avoid damaging workpieces without sacrificing gripping power and adjustability.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Lock the jaws in a vise-like grip around a workpiece and these pliers stay clamped in place to leave your hands free.

Secure these holders to a table or benchtop and slide in up to three pairs of locking pliers to create a hands-free way to hold your work.

When there isn't clearance to use standard-grip locking pliers, the angled handle on these tools gives you access. Lock the jaws around a workpiece and these pliers stay clamped in place.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines.

Long jaws reach workpieces in recessed areas. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. They are shaped to reach around closely spaced components and other obstructions.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Tips almost twice as wide as those of standard long-nose pliers give you a better grip on your work. These are also known as duckbill and flat-nose pliers.

Prevent damage to your workpieces with pliers that have nonmarring jaws.

Grip, bend, and twist wire and other small workpieces. Also known as needle-nose and chain-nose pliers, these tools have long, tapered jaws.

Also known as duckbill and flat-nose pliers, the extra-wide tips give you better grip on your work. These stainless steel tools are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

With thinner tips than standard long-nose pliers, these stainless steel tools fit into tight spaces and are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

You don't have to move the pivot point on these pliers—squeeze the handle and the jaws adjust to fit your workpiece.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Get the best possible grip on round objects, such as oil filters, connectors, and PVC pipe. These pliers have curved jaws and a slip joint to switch between two opening sizes. They're also known as cannon plug pliers.

Designed for looping and bending wire, these steel tools are also known as round-nose pliers.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. Also known as miniature and electronics pliers, they have a round nose for looping and bending wire.

Working with large retaining rings is easier with a T-handle. Turn it to open and close the jaws. Change tips for a different size or angle using the included hex key.

Insulated handles protect against shock from accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet ASTM F1505.

Change tips to use a different size or angle.

Install and remove rings inside a bore or around a shaft. Adjust the jaw to switch from internal to external retaining ring types.

The pliers in these sets have a forged construction, which provides high strength for durability and long life.

Slide the retaining ring in between the jaws of the tool and push the ring onto a shaft.

Install rings that have wide "ears." Slide the retaining ring in between the jaws of the tool and push the ring onto a shaft.

Reach under collars to break them without cutting or damaging the fastener and surrounding material. These tools even work on rounded or stripped collars. Also known as Hi-Lok pliers.

Cushioned handles provide comfortable, long-term use.

Use the included extension to get extra length. Thread wire through the tip and eyelets, bending the wire ends over to keep it in place. Pull out the knob to twist the wire.

These sets include one wire-twisting pliers, one adjustable-length wire-twisting pliers, and three spools of wire.

Squeeze the handles and the gripping surfaces adjust to fit your fastener and prevent slipping and stripping.

The head has a serrated hammer on one side for driving staples, a point on the other for pulling staples, and a staple grip on top.

The specially designed internal spring provides constant, uniform tension for superior performance.

These tools divert static electricity faster than our other static-control wire cutters.

These cutters have insulated grips to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505-01.

Also known as diagonal-cutting pliers.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).