With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

The zinc plating provides some corrosion resistance.

With their mirror-like finish, these are the go-to spacers when appearance matters.

Also known as arbor spacers, these are notched to space components on a keyed shaft.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Add length to a binding barrel.

Create strong joints in wood and wood composite.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

The coated flange seals out moisture and prevents corrosion.

These rivet nuts are mildly corrosion resistant.

These kits include one size of low-profile rivet nuts.

About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.

The left-hand threads on these coupling nuts resists loosening from counterclockwise vibration. Use in light duty applications.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

A smooth rounded body provides a finished look.

Also known as roll, tension, split, and expansion pins, these pins have a slot along one side that you squeeze closed to install them into unthreaded holes.

A zinc-plated finish gives these steel inserts mild corrosion resistance.

A black-phosphate finish provides mild corrosion resistance.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

A black-phosphate finish provides mild corrosion resistance.

These assortments include various sizes of thread-locking inserts.

Steel inserts have high strength for durability.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Hooked prongs give these inserts excellent holding power even when removing screws.

A zinc plating provides corrosion resistance in wet environments.

A zinc plating provides corrosion resistance in wet environments.

A zinc plating provides corrosion resistance in wet environments.

The removable flat head provides a flush finish in countersunk holes.

Turn the bolt to expand the nut for a secure hold in concrete. These anchors are often used to anchor machinery.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Use these sleeves—also known as ferrules—with high-pressure compression nuts and fittings. They withstand about twice as much pressure as sleeves for standard compression fittings, so they’re good for hydraulic power applications.

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

Permanently mount this press on a bench top.

Made of coiled spring steel, these bellows protect equipment from hot and sharp chips.

Shape, debur, and sand edges and internal surfaces.

Assortments include a selection of sanding sleeves to shape, debur, and sand edges and internal surfaces.

Flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces. They provide more control than a standard sanding sleeve but are more aggressive than a traditional flap wheel. As the flaps wear, new abrasive is exposed.

If your Morse taper arbor is too small or large for your machine spindle, insert it into one of these adapters. Also known as sleeves or shell sockets.

The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck.

Avoid wear caused by repeatedly pressing bushings into your jig fixture. Instead, press fit these sleeves into the fixture one time, and then swap bushings with different IDs in and out to change the size of your bit.

These binders mount to machines, equipment, and walls.

Mount these binders to machines, equipment, walls, and flat surfaces to create permanent viewing spots and free up desk space—they display documents in a way that’s sanitary for all users.

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.

Insert these bushings into the bore of your sprocket for flush or recessed mounting.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.

No need for clamps or connectors—duct and fittings have a male end that is slightly smaller than its female end for simple assembly.