These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

Projections on the base concentrate the weld and provide room for heat to dissipate.

Use these metric nuts in channels and tight spaces where round-base weld nuts won't fit.

Weld these nuts to uncoated steel surfaces.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to stainless steel surfaces.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

Weld these metric nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Threads float inside the retainer of these metric nuts so you can install a bolt at a slight angle to align with off center parts.

Stainless steel adhesive-mount nuts have excellent corrosion resistance in most environments.

Create threads in hard-to-work areas—where you can’t reach the back of a workpiece, or material is too thin to be tapped.

Use these tube-end weld nuts with left-hand threaded fasteners.

Install from the top of the T-slot track and secure with a quarter turn. Also known as quarter-turn T-slot nuts.

For mounting items to your machine table, these kits contain the full system of necessary components.

Get everything needed for basic workholding on a machine table.