Material Material |
---|
|
Thimble Material Thimble Material |
---|
|
For Wire Rope Diameter For Wire Rope Diameter |
---|
|
|
|
Fitting Type Fitting Type |
---|
![]() | ![]() |
Thimble | Rope Clamp |
Loop Inside Width Loop Inside Width |
---|

|
|
|
Finish Finish |
---|
|
Loop Inside Length Loop Inside Length |
---|

Application Application |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Specifications Met Specifications Met |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Attachment Type Attachment Type |
---|
![]() | Loop |
![]() | Reinforced Loop |
![]() | Plain |
For Wire Rope Construction For Wire Rope Construction |
---|
Length Length |
---|
Capacity Capacity |
---|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Thimble Finish Thimble Finish |
---|
|
About Sling Configurations and Capacity
More
Medium Duty Wire Rope Thimbles—Not for Lifting

Also known as standard-pattern thimbles, these provide better protection against fraying than light-duty thimbles.
Zinc-plated and galvanized steel thimbles are corrosion resistant.
Warning: Do not use with coated rope unless the coating is removed.
Loop | |||||
---|---|---|---|---|---|
For Wire Rope Dia. | Inside Lg. | Inside Wd. | Specifications Met | Each | |
Zinc-Plated Steel | |||||
1/8" | 1 5/16" | 11/16" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
3/16" | 1 5/16" | 11/16" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
1/4" | 1 5/16" | 11/16" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
Galvanized Steel | |||||
5/16" | 1 1/2" | 13/16" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
3/8" | 1 5/8" | 15/16" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
1/2" | 1 7/8" | 1 1/8" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
5/8" | 2 1/4" | 1 3/8" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
3/4" | 2 1/2" | 1 5/8" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
7/8" | 3 1/2" | 1 7/8" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
1" | 4 1/4" | 2 1/2" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
1 1/8", 1 1/4" | 4 1/2" | 2 3/4" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
Heavy Duty Wire Rope Thimbles—For Lifting

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.
Galvanized steel thimbles have a thick coating for corrosion resistance.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Loop | |||||
---|---|---|---|---|---|
For Wire Rope Dia. | Inside Lg. | Inside Wd. | Specifications Met | Each | |
Galvanized Steel | |||||
1/4" | 1 5/8" | 7/8" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
5/16" | 1 7/8" | 1 1/16" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
3/8" | 2 1/8" | 1 1/8" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
7/16" | 2 3/8" | 1 1/4" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
1/2" | 2 3/4" | 1 1/2" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
9/16", 5/8" | 3 1/4" | 1 3/4" | Fed. Spec. FF-T-276B | 0000000 | 0000 |
3/4" | 3 3/4" | 2" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
7/8" | 4 1/4" | 2 1/4" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
1" | 4 1/2" | 2 1/2" | Fed. Spec. FF-T-276B | 0000000 | 00000 |
Light Duty Wire Rope Thimbles—Not for Lifting

Use one of these thimbles to support a wire rope loop and prevent it from fraying. They are also known as thin pattern thimbles.
Zinc-plated steel thimbles are mildly corrosion resistant.
Warning: Do not use with coated rope unless the coating is removed.
Loop | ||||||
---|---|---|---|---|---|---|
For Wire Rope Dia. | Inside Lg. | Inside Wd. | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
3/64", 1/16", 5/64", 3/32" | 11/16" | 3/8" | AN100, MIL-T-5677 | 10 | 0000000 | 00000 |
3/32", 7/64", 1/8" | 3/4" | 3/8" | AN100, MIL-T-5677 | 10 | 0000000 | 0000 |
5/32" | 13/16" | 7/16" | AN100, MIL-T-5677 | 10 | 0000000 | 0000 |
3/16" | 1" | 1/2" | AN100, MIL-T-5677 | 10 | 0000000 | 0000 |
7/32", 1/4" | 1 7/16" | 3/4" | AN100, MIL-T-5677 | 5 | 0000000 | 0000 |
9/32", 5/16" | 1 13/16" | 15/16" | AN100, MIL-T-5677 | 5 | 0000000 | 0000 |
3/8" | 2" | 1" | AN100, MIL-T-5677 | 5 | 0000000 | 00000 |
Open-End Light Duty Wire Rope Thimbles—Not for Lifting

Open ends allow more space to connect attachments than other thimbles. Made of galvanized steel, these thimbles are corrosion resistant.
Warning: Do not use with coated rope unless the coating is removed.
Wire Rope Clamp and Thimble Kits—Not for Lifting



Kits include clamps and thimbles to protect the inside of wire rope loops from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
Galvanized steel and iron clamps and thimbles are corrosion resistant.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Clamp | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope Dia. | No. of Clamps | Rope Turnback | For Wire Rope Construction | Wd. | Ht. | Thick. | No. of Thimbles | Fabrication | Required Torque, ft.-lbs. | Capacity | Specifications Met | Each | |
Galvanized Steel Clamps with Galvanized Steel Thimble | |||||||||||||
1/8" | 2 | 3 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 7/8" | 31/32" | 3/8" | 1 | Forged | 4.5 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
3/16" | 2 | 3 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 1" | 1 5/32" | 7/16" | 1 | Forged | 7.5 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
1/4" | 2 | 4 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 1/4" | 1 13/32" | 9/16" | 1 | Forged | 15 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
5/16" | 2 | 5 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 9/16" | 1 13/16" | 11/16" | 1 | Forged | 30 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
3/8" | 2 | 6 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 7/8" | 2 1/4" | 7/8" | 1 | Forged | 45 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
7/16" | 2 | 7" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 1/16" | 2 3/8" | 7/8" | 1 | Forged | 65 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
1/2" | 3 | 11 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 1/16" | 2 41/64" | 7/8" | 1 | Forged | 65 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
5/8" | 3 | 12" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 3/8" | 3 1/4" | 1 1/16" | 1 | Forged | 95 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
3/4" | 4 | 18" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 2 9/16" | 3 5/16" | 1 1/16" | 1 | Forged | 130 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
Galvanized Iron Clamps with Galvanized Steel Thimble | |||||||||||||
1/16" | 2 | 2 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 3 × 7 IWRC 3 × 7 Hollow Core 6 × 7 Fiber Core 7 × 7 IWRC 7 × 7 Strand Core | 11/16" | 13/16" | 7/16" | 1 | Cast | __ | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
1/8" | 3 | 4 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7/8" | 31/32" | 3/8" | 1 | Cast | 3 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
3/16" | 3 | 5 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1" | 1 5/32" | 7/16" | 1 | Cast | 4.5 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
1/4" | 3 | 7" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/4" | 1 13/32" | 9/16" | 1 | Cast | 15 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
5/16" | 3 | 7 3/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 9/16" | 1 13/16" | 11/16" | 1 | Cast | 15 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
3/8" | 3 | 9 1/2" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 7/8" | 2 1/4" | 7/8" | 1 | Cast | 30 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
7/16" | 3 | 10 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 2 3/8" | 7/8" | 1 | Cast | 40 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 0000 |
1/2" | 4 | 15 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 2 41/64" | 7/8" | 1 | Cast | 45 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
5/8" | 4 | 16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 3/8" | 3 1/4" | 1 1/16" | 1 | Cast | 75 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
3/4" | 5 | 22 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 9/16" | 3 5/16" | 1 1/16" | 1 | Cast | 75 | Not Rated | Fed. Spec. FF-C-450 | 0000000 | 00000 |
Wire Rope Clamps with Thimbles—Not for Lifting



A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Loop | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope Dia. | Rope Turnback | For Wire Rope Construction | Inside Lg. | Inside Wd. | Overall Lg. | Fabrication | Required Torque, ft.-lbs. | Capacity, lbs. | Each | |
Steel | ||||||||||
3/8" | 6 1/2" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 5/16" | 1 1/4" | 5 3/8" | Cast | 40 | 2,200 | 0000000 | 000000 |
1/2" | 11 1/2" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 2 1/2" | 1 15/32" | 7 1/8" | Cast | 90 | 4,000 | 0000000 | 000000 |
Steel Wire Rope with Reinforced Loop—For Lifting

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope. The thimble prevents fraying and the end is secured with a metal sleeve. The construction of this wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
Dia. | Cap., lbs. | Recommended Pulley/Drum Dia. | Loop Inside Lg. | Specifications Met | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 30 ft. | 40 ft. | 50 ft. | 75 ft. | 100 ft. | 200 ft. | |
Steel | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6 × 19 Construction—IWRC Core | ||||||||||||||||
3/16" | 700 | 6 3/8" | 1 5/16" | Fed. Spec. RR-W-410 | 0000000 | |||||||||||
1/4" | 1,300 | 8 1/2" | 1 5/8" | Fed. Spec. RR-W-410 | 0000000 | |||||||||||
5/16" | 2,000 | 10 5/8" | 1 7/8" | Fed. Spec. RR-W-410 | 0000000 | |||||||||||
3/8" | 2,800 | 12 3/4" | 2 1/8" | Fed. Spec. RR-W-410 | 0000000 | |||||||||||
1/2" | 5,000 | 17" | 2 3/4" | Fed. Spec. RR-W-410 | 0000000 | |||||||||||
5/8" | 7,800 | 21 1/4" | 3 1/4" | Fed. Spec. RR-W-410 | 0000000 |
Galvanized Steel Wire Rope with Reinforced Loop—For Lifting

The galvanized finish resists corrosion. With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope. This wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut.
Warning: Never use to lift people or items over people.
Dia. | Cap., lbs. | Recommended Pulley/Drum Dia. | Loop Inside Lg. | Specifications Met | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 30 ft. | 40 ft. | 50 ft. | 75 ft. | 100 ft. | |
Galvanized Steel | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
7 × 19 Construction—Strand Core | |||||||||||||||
1/8" | 400 | 3 1/4" | 1 5/16" | Fed. Spec. RR-W-410 | 0000000 | ||||||||||
3/16" | 840 | 4 7/8" | 1 5/16" | Fed. Spec. RR-W-410 | 0000000 | ||||||||||
7/32" | 1,120 | 5 11/16" | 1 5/8" | Fed. Spec. RR-W-410 | 0000000 | ||||||||||
1/4" | 1,400 | 6 1/2" | 1 5/8" | Fed. Spec. RR-W-410 | 0000000 |
Reinforced Loop-to-Loop Lanyards—Not for Lifting
A thimble on the inside of the loop protects the loop from fraying.
Galvanized steel lanyards are corrosion resistant.


Lg. | Capacity, lbs. | Loop Inside Lg. | Sleeve Material | Thimble Material | Specifications Met | Each | |
1/8" Dia.—7 × 19 Construction | |||||||
---|---|---|---|---|---|---|---|
12" | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 000000000 | 000000 |
24" | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
3ft. | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
4ft. | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
3/16" Dia.—7 × 19 Construction | |||||||
12" | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 000000000 | 00000 |
24" | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
3ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
4ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
5ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
6ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
8ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
10ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | __ | 00000000 | 00000 |
5/16" Dia.—6 × 19 Construction | |||||||
9ft. | 2,100 | 1 7/8" | Galvanized Steel | Galvanized Steel | Fed. Spec. FF-T-276B | 000000000 | 000000 |
Lg. | Capacity, lbs. | Loop Inside Lg. | Sleeve Material | Thimble Material | Temperature Range, °F | Each | |
1/8" Dia.—7 × 19 Construction | |||||||
---|---|---|---|---|---|---|---|
12" | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 000000 |
24" | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
3ft. | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
4ft. | 400 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
3/16" Dia.—7 × 19 Construction | |||||||
12" | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
24" | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
3ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
4ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
5ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
6ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
8ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |
10ft. | 800 | 1 3/8" | Aluminum | Zinc-Plated Steel | -20° to 170° | 000000000 | 00000 |


Uncoated | Clear Nylon-Plastic Coated | ||||||||
---|---|---|---|---|---|---|---|---|---|
Choose a Lg. | Capacity, lbs. | Loop Inside Lg. | Sleeve Material | Thimble Material | Each | Temperature Range, °F | Each | ||
1/8" Dia.—7 × 19 Construction | |||||||||
6"-240" | 400 | 1 3/8" | Galvanized Steel | Zinc-Plated Steel | 00000000 | 000000 | -30° to 180° | 00000000 | 000000 |
3/16" Dia.—7 × 19 Construction | |||||||||
6"-240" | 840 | 1 3/8" | Galvanized Steel | Zinc-Plated Steel | 00000000 | 00000 | -30° to 180° | 00000000 | 00000 |
Wire Rope Slings
![]() Crimped and Reinforced Thimble Eye | ![]() Basket |
![]() Choker | |
![]() Vertical |
These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings. They include a tag that shows capacities in each configuration.
Crimped and reinforced thimble eye slings have a thimble on the inside of the loops to prevent fraying. Loops are secured with a metal sleeve.
6 × 19 construction is more flexible than 7 × 7.
Warning: Never use to lift people or items over people.
Capactiy, lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Choker | Vertical | Basket | Eye Lg. | Material | Max. Temp., °F | Specifications Met | Other Lengths, ft. | 3 ft. Lg. | 4 ft. Lg. | 5 ft. Lg. | 6 ft. Lg. | 8 ft. Lg. | 10 ft. Lg. | |
With Crimped and Reinforced Thimble Eye | |||||||||||||||
6 × 19 Construction—IWRC Core | |||||||||||||||
1/4" | 960 | 1,300 | 2,600 | 1 5/8" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 2 to 20 | 0000000 | ||||||
3/8" | __ | 2,800 | 5,600 | 2 1/8" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 2 to 20 | 0000000 | ||||||
1/2" | __ | 5,000 | 10,200 | 2 3/4" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 2 to 20 | 0000000 | ||||||
5/8" | __ | 7,800 | 15,600 | 3 1/4" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 2 to 20 | 0000000 | ||||||
3/4" | 8,200 | 11,200 | 22,000 | 3 3/4" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 3 to 20 | 0000000 | ||||||
7/8" | 11,200 | 15,200 | 30,000 | 4 1/4" | Steel | 400° | OSHA Compliant 29 CFR 1910.184, ASME B30.9 | 3 to 20 | 0000000 |