These heavy duty tops have a durable, powder-coated finish.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.

The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.

For added security, drawers are concealed behind padlockable doors.

Start with the workbench and then customize the interior by adding drawers and shelves.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Keep tools visible and organized above a workbench.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.

With a flatness tolerance of 0.002" per foot, these tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

These durable tables won't warp or splinter. They can be configured at a custom height.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

Adjust these tables from 18" to 24" to customize the height of machinery and equipment.

Replace a table leg or make a table with your own tabletop.

Pull metal particles from grinding, cutting, and finishing workpieces out of the air to avoid breathing them and creating sparks in your work area.

Create a personalized work area by adding accessories. These workstations are often used for small-parts assembly.

Change any desk or table into a stand-up-height work surface.

The work surface is positioned at a comfortable height for writing and working while standing.

Switch between sitting and standing while working.

Mix and match components to design an office work area that can be reconfigured as needed.

Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.

Raise and lower your robot arm on these workstations, placing them at the right height for each task.