Search Results
Number of Jaws Number of Jaws |
|---|
|
Jaw Style Jaw Style |
|---|
 | External |
 | External/Internal |
For Maximum OD For Maximum OD |
|---|
|
|
|
Puller Material Puller Material |
|---|
|
Jaw Tip Width Jaw Tip Width |
|---|
|
|
|
Forcing Screw Thread Size Forcing Screw Thread Size |
|---|
Jaw Tip Thickness Jaw Tip Thickness |
|---|
|
|
|
Capacity Capacity |
|---|
|
Forcing Screw Material Forcing Screw Material |
|---|
|
Overall Jaw Length Overall Jaw Length |
|---|
|
|
|
Overall Forcing Screw Length Overall ForcingScrew Length |
|---|
|
|
|
Safety Properties Safety Properties |
|---|
|
About External and Internal Grip Pullers
More
Adjustable Face-Grip Puller Sets
Shown Assembled
Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.
| Puller Material | Includes | Each | |
| Steel | Adjustable Face-Grip Small-Hole Puller (For Up To 3 1/4" OD; 4 3/8" Reach) with 4 3/4" Long Forcing Screw Adjustable Face-Grip Large-Hole Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8†Long Forcing Screw 12 Flange-Head Cap Screws (3 of Each: 3/8"-16 × 3 1/2" Lg., 3/8"-24 × 3" Lg., 5/16"-18 × 3 1/2" Lg., and 5/16"-24 × 3 1/2" Lg.) | 00000000 | 0000000 |
External Grip Pullers
Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
Pullers with jaw tips on both ends have a different jaw tip size on each end for versatility in fitting bearings, gears, and wheels.
Two Jaws with Tips on One End
Pullers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Adjustment Holes | Forcing Screw | Replacement Jaws | ||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-3 1/4" | 2 1/8" | 1 | Steel | Steel | Steel | 1/4" | 3/16" | 2 | 1/4" | 3 7/8" | 5/16"-24 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-9 1/2" | 8 3/4" | 7 | Steel | __ | Steel | 1" | 3/8" | 3 | 7/16" | 9" | 11/16"-18 | 0000000 | 00000 | 000000 | 000000 |
| 1/2"-12" | 11" | 13 | Steel | __ | Steel | 1" | 9/16" | 2 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-15 1/2" | 15 1/4" | 13 | Steel | __ | Steel | 1" | 9/16" | 3 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-16" | 18 3/4" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 3 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-20" | 22 1/4" | 25 | Steel | __ | Steel | 1 1/2" | 1 1/16" | 3 | 11/16" | 16" | 1 1/4"-12 | 0000000 | 000000 | 000000 | 00 |
Two Jaws with Tips on Both Ends
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
| 1/2"-6" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 00000 | 000000 | 00000 |
| 1/2"-6" | 5 1/2" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 2 | 3/8" | 7" | 9/16"-20 | 0000000 | 00000 | 000000 | 00000 |
| 1/2"-9" | 5" | 7 | Steel | Steel | 1" × 5/16", 1" × 3/8" | 1 | 7/16" | 9" | 11/16"-18 | 0000000 | 00000 | 000000 | 00000 |
Three Jaws with Tips on One End
Puller with T-Handle
Puller
Jaw Tip | Adjustment Holes | Forcing Screw | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | |
| 1/2"-3 1/4" | 2 1/8" | 1 | Steel | Steel | Steel | 1/4" | 3/16" | 2 | 1/4" | 3 7/8" | 5/16"-24 | 0000000 | 000000 |
| 1/2"-14" | 14 1/2" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 2 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 |
| 1/2"-16" | 18 3/4" | 17 1/2 | Steel | __ | Steel | 1 5/16" | 13/16" | 3 | 5/8" | 13 3/4" | 1"-14 | 0000000 | 000000 |
| 1/2"-20" | 22 1/4" | 25 | Steel | __ | Steel | 1 1/2" | 1 1/16" | 3 | 11/16" | 16" | 1 1/4"-12 | 0000000 | 000000 |
Combination 2/3 Jaws with Tips on One End
Pullers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-11" | 8 3/4" | 7 | Steel | Steel | 1" | 3/8" | 3 | 7/16" | 9" | 11/16"-18 | 0000000 | 0000000 | 000000 | 000000 |
| 1/2"-12" | 11" | 13 | Steel | Steel | 1" | 9/16" | 2 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
| 1/2"-17" | 15 1/4" | 13 | Steel | Steel | 1" | 9/16" | 3 | 1/2" | 12 1/2" | 13/16"-16 | 0000000 | 000000 | 000000 | 00 |
Combination 2/3 Jaws with Tips on Both Ends
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Adjustment Holes | Forcing Screw | Replacement Jaws | |||||||||||
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | No. of | Dia. | Overall Lg. | Thread Size | Each | Each | ||
| 1/2"-4 3/4" | 3 1/4" | 2 | Steel | Steel | 1/4" × 3/16", 1/2" × 1/8" | 2 | 5/16" | 4 7/8" | 3/8"-24 | 0000000 | 000000 | 000000 | 000000 |
| 1/2"-7" | 3 1/4" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 1 | 3/8" | 7" | 9/16"-20 | 0000000 | 00000 | 000000 | 00000 |
| 1/2"-7" | 5 1/2" | 5 | Steel | Steel | 3/8" × 5/16", 3/4" × 1/4" | 2 | 3/8" | 7" | 9/16"-20 | 0000000 | 00000 | 000000 | 00000 |
| 1/2"-10 1/2" | 5" | 7 | Steel | Steel | 1" × 5/16", 1" × 3/8" | 1 | 7/16" | 9" | 11/16"-18 | 0000000 | 000000 | 000000 | 00000 |
Quick-Hold External Grip Pullers
These pullers have a cage around the jaws that keeps them aligned so you can secure bearings and pulleys quickly. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Two Jaws with Tips on One End
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
| 1/4"-3 1/4" | 2 1/4" | 1 | Steel | Iron | Steel | 11/32" | 1/8" | 5 1/2" | 5/16"-24 | 000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 1/2"-5" | 4" | 2 | Steel | Iron | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
| 1/2"-7" | 6" | 6 | Steel | Iron | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
| 3/4"-12" | 8" | 12 | Steel | Iron | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 0000 |
| 1"-15" | 9 5/8" | 14 | Steel | Iron | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 0000 |
| 2 1/2"-18" | 12" | 25 | Steel | Iron | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 35 | Steel | Iron | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Three Jaws with Tips on One End
Pullers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Jaws | Replacement Jaw Heads | Replacement Pins | |||||||||||||
| For OD | Reach | Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | Each | Each | ||||
| 1/4"-4 1/2" | 3" | 2 | Steel | Iron | Steel | 7/16" | 3/16" | 7" | 3/8"-24 | 000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 1/2"-5" | 4" | 5 | Steel | Iron | Steel | 5/8" | 3/16" | 9 5/8" | 9/16"-16 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
| 1/2"-7" | 6" | 10 | Steel | Iron | Steel | 3/4" | 1/4" | 12 3/4" | 5/8"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
| 3/4"-12" | 8" | 17 | Steel | Iron | Steel | 7/8" | 9/32" | 16 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 0000 |
| 1"-15" | 9 5/8" | 20 | Steel | Iron | Steel | 1" | 11/32" | 19 1/4" | 3/4"-14 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 0000 |
| 2 1/2"-18" | 12" | 30 | Steel | Iron | Steel | 1 1/4" | 1/2" | 26" | 1 1/8"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
| 3"-25" | 14" | 40 | Steel | Iron | Steel | 1 7/16" | 11/16" | 31 1/2" | 1 1/4"-14 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 |
Quick-Hold External Grip Puller Sets
Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
| Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Includes | Each | |
| 5-20 | Steel | Iron | Steel | 2-Jaw Puller (For 1/2"-7" OD) 3-Jaw Puller (For 1"-14" OD) 3-Jaw Puller (For 1/2"-5" OD) 3-Jaw Puller (For 1/2"-7" OD) Forcing Screws T-Handles | 0000000 | 0000000 |
Nonsparking External Grip Pullers
Made of aluminum-bronze that is FM approved, these nonmagnetic pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
Warning: Do not use these tools in direct contact with acetylene.
Forcing Screw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Jaw Tip Wd. × Jaw Tip Thick. | Overall Lg. | Thread Size | Each | |
Three Jaws with Tips on Both Ends | |||||||||
| 1 15/16"-3 15/16" | 4" | 1 | Aluminum-Bronze | Aluminum-Bronze | 5/8"×1/4", 5/8"×1/4" | 6 1/2" | M14 | 0000000 | 0000000 |
| 2 3/8"-5 7/8" | 6" | 1 1/2 | Aluminum-Bronze | Aluminum-Bronze | 7/8"×1/4", 7/8"×1/4" | 9 1/4" | M18 | 0000000 | 000000 |
| 2 3/4"-7 7/8" | 7 7/8" | 2 | Aluminum-Bronze | Aluminum-Bronze | 31/32"×13/32", 31/32"×13/32" | 12 7/8" | M22 | 0000000 | 000000 |
| 3 1/8"-13 3/4" | 13 3/4" | 4 | Aluminum-Bronze | Aluminum-Bronze | 1 3/32"×13/32", 1 3/32"×13/32" | 14" | M24 | 0000000 | 00000000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8†Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2†Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8†Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 0000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 000000 |
Reversible Jaw External/Internal Grip
Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | 2-Jaw Internal Grip Puller (For 1/2"-1 1/2" ID; 3/4" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—5-ton Capacity (For Up To 7" OD; 3 1/4" Reach) 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8†Long Forcing Screw Bearing Separator (For 1/2"-4 1/4" OD) Bearing Separator (For 1/8"-1 7/8" OD) Face-Grip Puller (For 1 1/2"-4 1/2" OD) with 13†Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Two Sets of Long-Reach Jaws (Three Jaws for 5-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) | 00000000 | 000000000 |
Quick-Hold Reversible Jaw External/Internal Grip Pullers
Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out. Puller base lifts up so you can add or remove jaws to create 2-jaw or 3-jaw configurations.
Pullers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Jaw Tip | Forcing Screw | Replacement Forcing Screws | |||||||||||
| For ID | For OD | Reach | Capacity, tons | Puller Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | Each | ||
Combination 2/3 Jaws with Tips on One End | |||||||||||||
| 3"-4" | 3"-4" | 4" | 2 | Steel | Steel | 9/16" | 3/16" | 8 3/4" | M15 × 2.0 | 0000000 | 000000 | 0000000 | 000000 |
| 3"-7" | 3"-7" | 7" | 5 | Steel | Steel | 7/8" | 1/4" | 11 3/4" | M18 × 2.5 | 0000000 | 000000 | 0000000 | 00000 |