For Finish For Finish |
|---|
|
System of Measurement System of Measurement |
|---|
|
Abrasive Material Abrasive Material | Show |
|---|
|
Abrasive Material Abrasive Material | Hide |
|---|
|
Individual/Set Individual/Set |
|---|
|
For Use On For Use On |
|---|
|
Container Type Container Type |
|---|
|
Lubrication Lubrication |
|---|
|
Stone Shape Stone Shape |
|---|
|
For Blade Style For Blade Style |
|---|
|
About Finishing
More
Smoothing and Polishing Stones
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate. We recommend using a water-soluble or oil-based lubricant.
Stones | Hand-Held Stone Holders | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | Each | ||
Novaculite—For Use On Steel | |||||||||
| 800 (Polished) | 4" | 1/4" | 1/4" | Gray | Recommended | 0000000 | 000000 | 00000000 | 00000 |
| 800 (Polished) | 4" | 3/8" | 3/8" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
| 800 (Polished) | 4" | 1/2" | 1/2" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
| 800 (Polished) | 6" | 3/8" | 3/8" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
| 800 (Polished) | 6" | 1/2" | 1/2" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
| Grit (For Finish) | Lg. | Wd. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| 800 (Polished) | 4" | 1/4" | Gray | Recommended | 0000000 | 000000 |
| 800 (Polished) | 4" | 3/8" | Gray | Recommended | 0000000 | 00000 |
| 800 (Polished) | 4" | 1/2" | Gray | Recommended | 0000000 | 00000 |
| 800 (Polished) | 6" | 3/8" | Gray | Recommended | 0000000 | 00000 |
| 800 (Polished) | 6" | 1/2" | Gray | Recommended | 0000000 | 00000 |
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
|---|---|---|---|---|---|---|---|
| 800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
|---|---|---|---|---|---|---|---|
| 800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
|---|---|---|---|---|---|---|---|
| 800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
|---|---|---|---|---|---|---|---|
| 800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
|---|---|---|---|---|---|---|---|
| 800 (Polished) | 3" | 1" | 1/8"-1/4" | Gray | Recommended | 0000000 | 000000 |
| Grit (For Finish) | Lg. | Dia. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| 800 (Polished) | 3" | 1/32"-5/16" | Gray | Recommended | 0000000 | 000000 |
Smoothing and Polishing Stone Sets
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface. We recommend using a water-soluble or oil-based lubricant.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate.
| No. of Pieces | Lg. | Includes | Stone Style | Grit (For Finish) | Color | Container Type | Each | |
Novaculite—For Use On Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4 | 4" | One Square Stone—1/4" Wd. × 1/4" Thick. One Triangular Stone—1/4" Wd. One Round Stone—1/4" Dia. One Knife Stone—29/32" Wd. × 1/8"-1/4" Thick. | Straight | 900 (Polished) | Off-White | Box | 0000000 | 000000 |
| 4 | 6" | One Square Stone—3/8" Wd. × 3/8" Thick. One Triangular Stone—3/8" Wd. One Round Stone—3/8" Dia. One Knife Stone—29/32" Wd. × 1/8"-3/8" Thick. | Straight | 900 (Polished) | Off-White | Box | 0000000 | 00000 |
Two-Grit Sharpening Stones
A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.
Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant.
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Each | |
Aluminum Oxide × Novaculite | ||||||
| 6" | 2" | 1" | 100 (Smooth) × 600 (Polished) | Oil Filled × Required | 0000000 | 000000 |
Novaculite × Novaculite | ||||||
| 4" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
| 6" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
| 8" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
| 10" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
Single-Grit Sharpening Stones
Quickly sharpen straight-blade tools.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant..
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lubrication | Choose a Grit (For Finish) | Each | |
Rectangular | ||||||
Novaculite | ||||||
| 3" | 1" | 3/8" | Required | 600 (Polished) | 0000000 | 000000 |
| 3" | 1" | 3/8" | Required | 800 (Polished) | 0000000 | 00000 |
| 4" | 1" | 3/8" | Required | 600 (Polished) | 0000000 | 00000 |
| 4" | 1" | 3/8" | Required | 800 (Polished) | 0000000 | 00000 |
| 4" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 6" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 8" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 10" | 2" | 3/4" | Required | 0000000 | 000000 | |
Three-Grit Sharpening Stones
Three separate grit surfaces enables multistep sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.
Stone | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Includes | Each | |
Rectangular | |||||||
Silicon Carbide × Novaculite × Novaculite | |||||||
| 6" | 1 5/8" | 1/2" | 150 (Smooth) × 600 (Smooth) × 800 (Extra Smooth) | Required × Required × Required | 1 oz. Oil | 0000000 | 000000 |
T-Slotted Framing Structural Brackets
