The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Add a knob or handle to the threaded shank. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A high-profile knob is easy to grip, but fits in small spaces. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A T-handle makes these pins easy to grip. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

When there isn't enough room for a T-handle, an L-handle saves space but is still easy to grip. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

A recessed button prevents accidental pin removal. These all-stainless steel pins stand up to corrosive environments. They lock in place until you push the button to release the spring-loaded retaining balls.

These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Also known as double-acting pins, these pins lock in place until you push the button or pull the ring to release the spring-loaded retaining balls. The smooth ring handle won't catch on parts.

Use the key to unlock these pins, then press the button to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.

The low-profile head on these pins holds them in place on one side.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

Install or remove these pins from either side.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

A spring holds these pins tight, while a toggle locks them in place. Flip the toggle to release the pin.

Often used to connect equipment to a drawbar in towing applications, these rugged pins have a welded solid steel retainer.

Spring force holds pieces of telescoping tubing together. Also known as snap buttons and tubing buttons.

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open. Bend prongs outward to secure.

A coil makes a stronger grip than standard hairpin cotter pins to prevent accidental release.

For parts that spin or are otherwise difficult to access, slide these pins in and tap them with a hammer for a temporary hold. Reposition work, then bend the prongs outward to secure.

These pins are coiled for more tension than standard wire-snap cotter pins.

Slide the pin through a hole then snap the ring down to lock these pins in place. Also known as click pins.

The double-head design lets you push or pull these pins from either side of the hole. Once in place there's little chance they will be vibrated out or knocked off.

Retract the nose by pulling the knob.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

Add a knob or handle to the threaded shank.

Two holes in the plate allow these plungers to be mounted to a flat surface.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Install these spring plungers with a screwdriver—they're slotted on one or both ends.

The flangeless design allows these spring plungers to mount flush with a surface.

Install with a driver.

A flange keeps the plunger from being pushed through a hole when the ball is depressed.

These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.

Clevis pins have a hole for a cotter pin on one end to lock them in place.

Clip these pins onto grooved shafts and clevis pins to keep components in place.