The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

More durable than standard metal switches, these can handle tough, repetitive use.

Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Install in 16 mm dia. cutouts.

Immediately cut power with a single push.

Rated NEMA 4X and 13, all switches resist corrosion and can withstand washdowns and oil/coolant spraying.

More lightweight than steel or stainless steel, these aluminum enclosed switches are rated NEMA 4X for protection from corrosion and washdowns.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

Immediately cut power by pulling the cable.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Light beams travel up to 32 ft. between the transmitter and receiver.

Install these switches in a panel cutout.

Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Identify a main switch.

Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.