This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.

These one-piece units have an all-welded steel construction to support heavy tools and materials.

The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.

Don't fumble with nuts, bolts, or shelf clips—shelves have rivets that tap into keyhole slots on the posts with a rubber mallet.

This shelving won't rust, dent, peel, or chip.

These one-piece units have an all-welded steel construction to support heavy tools and materials.

Faster to assemble than other heavy duty shelving, these units require no hardware.The uprights come assembled, and the shelves slide into place.

The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.

These steel shelves are epoxy-coated, making them chemical and corrosion resistant.

Pop the posts into the holes and these shelves are ready to load—no tools required.

This shelving has three times the shelf capacity of our Heavy Duty Wide and Deep Wire Shelving.

Design a complete shelving unit with these standards, shelf brackets, and metal shelves. All components are corrosion resistant and are often used for quality control, laboratory, and food service applications.

These shelves are corrosion resistant and vented to prevent dust buildup.

These standards can be surface mounted or flush mounted inside a routed groove.

These corrosion-resistant shelves hold twice the weight of other wall-mount shelving.

Choose from uprights up to 16 feet high and beams up to 144” wide to create a pallet rack to fit your needs.

Compatible with pallet racks with stepped beams.

Protect rack posts from damage caused by vehicles.

No need for cable ties—this netting includes hardware that slips into any post with keyhole slots. Attach netting to your racks to secure inventory, increase safety, and help meet OSHA requirements.

Prevent forklifts from knocking pallet racks apart—these 90° pins lock horizontal beams in place so you can safely load and unload pallets.

With up to 9,600 lbs. capacity per storage level, these are the strongest pallet racks we offer.

Store bars, spools, and other items on a single versatile rack.

Also known as cantilever racks.

Also known as cantilever racks.

With multiple heights, widths, and arm styles to choose from, create a rack that fits your needs. These racks are also known as cantilever racks.

Racks come with bin boxes made of heavy duty fiberglass-reinforced plastic.

Bins can be stacked on a surface, wall mounted, or attached to a rack.

Create storage that fits your space with these stackable bin shelves.

Bins slope slightly and have a lip to keep contents in place.

Roll these bins near benches or other work areas, and turn each storage level to access the items you need.

To create a rack, order a base and the number of dividers you need.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Screws and nuts secure brackets and accessories to T-slotted rails.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Slide drawers, panels, and doors with these tracks and rollers.

Integrate collaborative robots into T-slotted framing systems with these components.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Pivots provide smooth motion at the junction between two T-slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Route wires, cables, and tubing along T-slotted rails.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Made with a 110° angle and 3-ft. radius, use this curved channel to create continuous runs of channel without corners.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

When there's no access to the open side of a strut channel, slip one of these nuts through a slotted hole and turn it 90° to secure it in the channel.

Push these nuts into place rather than threading them onto a fastener.

Keep a rod securely centered against the strut channel.

Keep hardware centered in the strut channel slot.

Notches on these washers grip the channel to keep them in place.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Securely fasten strut channel to the floor.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

To provide corrosion resistance in wet environments, this framing is galvanized.

Create strong structures by welding this framing together. Add metal panels to close off openings.