Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

Typically used with high-pressure brass and bronze threaded pipe fittings.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Also known as Code 61 SAE hydraulic flanges.

Their small size makes these miniature fittings a good choice for cramped, confined spaces.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

A great solution when space is at a premium, these manifolds are less than an inch in height, yet allow you to supply up to 12 lines from one distribution point.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

Made of stainless steel, these couplings stand up to wet environments.

These brass couplings have good corrosion resistance.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

Also known as luer lock couplings, these connect with a half turn so you can easily connect and disconnect your line. With no latch, they have a low-profile design that works well in small spaces. Use in low-pressure applications up to 45 psi.

Fittings are 304 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Also known as JIS (Japanese Industrial Standard) fittings.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 5,000 psi.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Connect these fittings to air tools for pneumatic applications.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.