Seismic Bracing Anchors and Brackets
These OSHPD preapproved anchors and brackets support threaded-rod-mount hangers during seismic activity. A complete seismic bracing system consists of an upper bracket, a lower bracket, and strut or pipe (sold separately). Brackets work with standard-wall (Schedule 40) pipe sizes 1-2 as well as 1 5/8" wide strut channel. Mount the upper bracket directly to a ceiling or other flat surface, or use an anchor to mount the system to angles, beams, and joists.
Beam anchors allow you to mount upper brackets to beams, C-channel, ceiling joists, and other flat surfaces. Their set screws have heads that break off when the screw is tightened to ensure proper installation.
Angle iron anchors allow you to mount upper brackets to pairs of angles, such as those used in ceiling joists. Their set screws have heads that break off when the screw is tightened to ensure proper installation.
For Beam Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | For Max. Beam Thick. | Wd. | Lg. | Ht. | Material | Cap., lbs. | No. of Set Screws Included | Specifications Met | Certification | Includes | Each | |
Beam Anchor | ||||||||||||
| 3/8" | 7/8" | 2 3/8" | 2 3/4" | 3 9/16" | Steel | 1,000 | 2 | C-UL Listed FM Approved UL Listed | OSHPD Preapproved | 1/2" Bolt and Nut, Set Screws | 0000000 | 0000000 |
Angle Iron Anchor | ||||||||||||
| __ | 3/8" | 3 5/16" | 3" | 2 1/2" | Steel | 1,000 | 2 | C-UL Listed FM Approved UL Listed | OSHPD Preapproved | 1/2" Bolt and Nut, Set Screws | 0000000 | 00000 |
Webbing Boom Strap Fall-Arrest Anchor Points
Attach to the arm of a bucket truck. The strap has a cinching buckle for a snug, nonslip fit.
| For Max. Dia. | Capacity, lbs. | Material | Construction | Connection Type | Features | Each | |
| 42" | 350 | Polyester | Webbing | D-Ring | Cinching Buckle | 00000000 | 000000 |
Bolt-On Fall-Arrest Anchor Points
Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Material | Connection Type | Dia. | No. of | Fasteners Included | Each | |
Bolt On | |||||||
| 310 | Steel | D-Ring | 9/16" | 2 | No | 00000000 | 000000 |
Stationary I-Beam Fall-Arrest Anchor Points
Mount this anchor to vertical and horizontal I-beams.
For I-Beam Flange | ||||||
|---|---|---|---|---|---|---|
| Wd. | Thick. | Capacity, lbs. | Material | Connection Type | Each | |
Clamp On | ||||||
| 4" to 14" | 1 1/2" | 310 | Stainless Steel | D-Ring | 00000000 | 0000000 |
Push-In Fall-Arrest Anchor Points for Concrete
Wedge this anchor into a drilled mounting hole—it's good for vertical and horizontal concrete applications.
| For Mounting Hole Dia. | Capacity, lbs. | Material | Connection Type | Each | |
Push In | |||||
|---|---|---|---|---|---|
| 5/8" | 400 | Steel | D-Ring | 00000000 | 000000 |
Nail-On Fall-Arrest Anchor Points for Roofs
| Capacity, lbs. | Material | Connection Type | Fasteners Included | Each | |
Nail On | |||||
|---|---|---|---|---|---|
| 310 | Steel | D-Ring | No | 00000000 | 000000 |
Fall-Arrest Anchor Points with Winch
This system provides support when lowering workers into and retrieving them from tight spaces. Use the hand-operated winch to control lifting and lowering. You supply a harness.
The system comes with an adjustable mast and a separate portable base. For fixed-base installation, use the wall-mount or floor-mount base—weld or bolt the base to a concrete or steel structure and insert the mast into the opening.
| Wire Rope Lg., ft. | Ht. | Arm Lg. | Capacity, lbs. | Material | Snap Hook Material | Wire Rope Material | Features | Specifications Met | Each | |
| 65 | 79" to 100" | 12" to 29" | 350 | Aluminum | Steel | Galvanized Steel | Portable Base | ANSI/ASSP Z359.1, ANSI/ASSE A10.32 | 0000000 | 000000000 |