A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Lights produce a daylight appearance that highlights white/blue tones, which is good for inspecting. For indoor use.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas. These lights have plastic-coated steel guards to protect the bulbs. Use them with medium-base, screw-in LED bulbs.

Lights with a NEMA L5-20 plug turn and lock together for a secure connection.

For lights that are 50 ft. long, use up to a 30W bulb when connecting multiple strings. For lights that are 100 ft. long, use up to a 15W bulb when connecting multiple strings.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Styles A and B have hooks on the top of each light head for hanging.

Style C have additional LEDs on the back which bounce light off the ceiling to reduce glare. Each head has at least one loop on the back for easy mounting.

Style D are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.