Screw and nut sets or nuts secure brackets and other accessories to rails.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

This welded, one-piece strut channel combines two strut channels back-to-back.

Securely fasten strut channel to the floor.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Provide smooth motion between two pieces of strut channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Serrated grooves grip the lip of the channel.

Cover rough ends of strut channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Use with hex nuts to connect threaded rod.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Connect two channels to create a stacked channel.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Close off openings in structures while allowing air to pass through.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.