To provide corrosion resistance in wet environments, this framing is galvanized.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Create posts of varying lengths.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Connect T‐slotted rails and reinforce joints for structural stability.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Illuminate workstations, enclosures, and machines.

Pivots provide smooth motion at the junction between two T-slotted rails.

Control static and ground T-slotted framing structures with these bonding and grounding components.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Create continuous runs of channel without corners.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Securely fasten strut channel to the floor.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

When there's no access to the open side of a strut channel, slip one of these nuts through a slotted hole and turn it 90° to secure it in the channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Use with hex nuts to connect threaded rod.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Connect two channels to create a stacked channel.

Provide smooth motion between two pieces of strut channel.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.