Body Material Body Material |
|---|
|
Overall Length Overall Length |
|---|
Stem Material Stem Material |
|---|
|
Performance Properties Performance Properties |
|---|
|
Component Component |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Stem Diameter Stem Diameter |
|---|
Manufacturer Model Number Manufacturer Model Number |
|---|
Effective Working Length Effective Working Length |
|---|
Material Material |
|---|
|
Environment Environment |
|---|
|
Specifications Met Specifications Met |
|---|
|
Stylus Pens
Scribble notes and enter data on touch screen devices without removing gloves or leaving smudges. These stylus pens are more precise than a fingertip, so you can draw clean lines, tick small boxes, and tap with control. The tip has a non-scratch surface, so it won’t damage your screen. Use these pens with smart phones, tablets, and pressure-activated screens, such as those on hand-held PLCs.
| Tip Material | Body Material | For Use On | Features | Color | Each | |
| Rubber | Metal | Touch Screens | Pocket Clip | Black | 0000000 | 000000 |
Metal- and X-Ray-Detectable Stylus Pens
Operate hand-held PLCs and other pressure-activated screens (also known as resistive touch screens) in sanitary and food processing areas. These pens give you more control than a fingertip when writing notes or entering data, and won’t smudge or scratch your screen. They are made with metal and chemical additives that will set off metal detectors and appear on X-rays if they fall into your line. Because of this, they help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.
The one-piece design has no removable parts that could end up in your line, and no seams where dirt, bacteria, or other contaminants could hide. These pens are bright blue, so you can quickly find and retrieve them if they fall into your food line. They are FDA-compliant, meaning they are safe for direct contact with food.
These pens are not compatible with smart phones or tablets that require a human touch.
Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| Material | Shape | Body Material | For Use On | Features | Color | Specifications Met | Each | |
| Plastic | Point | Plastic | Touch Screens | Pocket Clip | Blue | FDA Compliant 21 CFR 177.1520 FDA Compliant 21 CFR 178.2010 FDA Compliant 21 CFR 178.3297  | 0000000 | 00000 |
Attachments for Renishaw Probes
Install these styli, adapters, and other accessories in Renishaw probes.
Ball styli are used for general purpose probing applications.
Cylinder styli are used for probing holes in thin workpieces.
Stylus extensions extend the reach of the stylus.
5-way stylus centers hold up to five styli at once to speed up inspection time by allowing you to probe with multiple styli.
Break stems are designed to break during an impact to protect your probe from damage.
Thread adapters adapt the thread of the stylus.
Ball | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia., mm | Material | Grade | Dia. Tolerance Range | Sphericity Tolerance Range | Effective Working Lg., mm | Overall Lg., mm | Stem Dia., mm | Body | Stem | Manufacturer Model Number | Each | |
M2 × 0.4 mm | ||||||||||||
| 0.3 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 2 | 10 | 0.2 | Stainless Steel | Tungsten Carbide | A-5000-7800 | 000000000 | 0000000 |
| 0.5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 3 | 10 | 0.4 | Stainless Steel | Tungsten Carbide | A-5000-7805 | 000000000 | 000000 |
| 0.5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 7 | 20 | 0.3 | Stainless Steel | Tungsten Carbide | A-5003-1345 | 000000000 | 000000 |
| 0.7 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 4 | 10 | 0.5 | Stainless Steel | Tungsten Carbide | A-5000-7801 | 000000000 | 00000 |
| 0.7 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 12 | 20 | 0.5 | Stainless Steel | Tungsten Carbide | A-5003-0577 | 000000000 | 000000 |
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 4.5 | 10 | 0.7 | Stainless Steel | Stainless Steel | A-5000-7806 | 000000000 | 00000 |
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 7 | 20 | 0.7 | Stainless Steel | Tungsten Carbide | A-5000-7808 | 000000000 | 00000 |
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 12.5 | 20 | 0.8 | Stainless Steel | Tungsten Carbide | A-5003-0033 | 000000000 | 00000 |
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 20.5 | 27.5 | 0.7 | Stainless Steel | Tungsten Carbide | A-5000-8663 | 000000000 | 00000 |
| 1.5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 12.5 | 20 | 1 | Stainless Steel | Tungsten Carbide | A-5003-0034 | 000000000 | 00000 |
| 1.5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 22.5 | 30 | 1 | Stainless Steel | Tungsten Carbide | A-5003-0035 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 6 | 10 | 1 | Stainless Steel | Stainless Steel | A-5000-7807 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 14 | 20 | 1 | Stainless Steel | Tungsten Carbide | A-5003-3822 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 14 | 20 | 1.4 | Stainless Steel | Stainless Steel | A-5000-3603 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 22.5 | 30 | 1.5 | Stainless Steel | Tungsten Carbide | A-5003-0036 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 32.5 | 40 | 1.5 | Stainless Steel | Tungsten Carbide | A-5003-0037 | 000000000 | 00000 |
| 3 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 17 | 20 | 1.5 | Stainless Steel | Stainless Steel | A-5000-4160 | 000000000 | 00000 |
| 3 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 47 | 50 | 2 | Stainless Steel | Ceramic | A-5003-0064 | 000000000 | 00000 |
| 4 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 20 | 20 | 1.5 | Stainless Steel | Stainless Steel | A-5000-4161 | 000000000 | 00000 |
| 4 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 50 | 50 | 2 | Stainless Steel | Ceramic | A-5003-0065 | 000000000 | 00000 |
M3 × 0.5 mm | ||||||||||||
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 4 | 21 | 0.7 | Stainless Steel | Stainless Steel | A-5000-3551 | 000000000 | 00000 |
| 1.5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 22.5 | 30 | 1 | Stainless Steel | Tungsten Carbide | A-5003-0051 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 9.6 | 21 | 1.4 | Stainless Steel | Stainless Steel | A-5000-3552 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 32.5 | 40 | 1.5 | Stainless Steel | Tungsten Carbide | A-5003-0053 | 000000000 | 00000 |
| 3 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 14.7 | 21 | 1.5 | Stainless Steel | Stainless Steel | A-5000-3553 | 000000000 | 00000 |
M4 × 0.7 mm | ||||||||||||
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 4.5 | 19.5 | 0.7 | Stainless Steel | Stainless Steel | A-5000-7545 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 8.9 | 19 | 1.4 | Stainless Steel | Stainless Steel | A-5000-7547 | 000000000 | 00000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 40 | 50 | 1.5 | Stainless Steel | Tungsten Carbide | A-5003-4797 | 000000000 | 000000 |
| 3 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 38.5 | 50 | 2 | Stainless Steel | Tungsten Carbide | A-5003-3680 | 000000000 | 000000 |
| 5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 16 | 20 | 3 | Stainless Steel | Stainless Steel | A-5000-6731 | 000000000 | 00000 |
| 5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 26 | 30 | 3 | Stainless Steel | Stainless Steel | A-5000-6352 | 000000000 | 00000 |
| 5 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 83.2 | 100 | 4.5 | Stainless Steel | Stainless Steel | A-5000-7522 | 000000000 | 00000 |
| 6 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 33.4 | 50 | 4.5 | Stainless Steel | Ceramic | A-5000-3709 | 000000000 | 000000 |
| 6 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 88.5 | 100 | 4.4 | Stainless Steel | Carbon Fiber | A-5003-6510 | 000000000 | 000000 |
| 6 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 88.5 | 100 | 4.5 | Stainless Steel | Carbon Fiber | A-5003-1358 | 000000000 | 000000 |
| 6 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 88.5 | 100 | 4.5 | Stainless Steel | Ceramic | A-5000-3712 | 000000000 | 000000 |
| 6 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 135 | 150 | 4.5 | Stainless Steel | Ceramic | A-5000-8156 | 000000000 | 000000 |
| 8 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 100 | 100 | 4.5 | Stainless Steel | Ceramic | A-5000-7796 | 000000000 | 000000 |
Ball | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia., mm | Material | Grade | Dia. Tolerance Range | Sphericity Tolerance Range | Effective Working Lg., mm | Overall Lg., mm | Stem Dia., mm | Body | Stem | Manufacturer Model Number | Each | |
M2 × 0.4 mm | ||||||||||||
| 1 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 8 | 15 | 1 | Stainless Steel | Stainless Steel | A-5000-8876 | 000000000 | 0000000 |
| 2 | Ruby | 5 | -0.000005" to 0.000005" | -0.000005" to 0.000005" | 7.2 | 21.2 | 1.55 | Stainless Steel | Stainless Steel | A-5000-7812 | 000000000 | 000000 |
Material | ||||||
|---|---|---|---|---|---|---|
| Overall Lg., mm | Stem Dia., mm | Body | Stem | Manufacturer Model Number | Each | |
M2 × 0.4 mm | ||||||
| 5 | 3 | Stainless Steel | Stainless Steel | A-5004-7610 | 000000000 | 000000 |
| 10 | 3 | Stainless Steel | Stainless Steel | A-5004-7585 | 000000000 | 00000 |
| 20 | 3 | Stainless Steel | Stainless Steel | A-5004-7586 | 000000000 | 00000 |
| 30 | 3 | Stainless Steel | Stainless Steel | A-5004-7591 | 000000000 | 00000 |
| 40 | 3 | Stainless Steel | Stainless Steel | A-5004-7611 | 000000000 | 00000 |
M3 × 0.5 mm | ||||||
| 20 | 4 | Stainless Steel | Stainless Steel | A-5004-7583 | 000000000 | 00000 |
M4 × 0.7 mm | ||||||
| 30 | 7.4 | Stainless Steel | Ceramic | A-5000-7754 | 000000000 | 00000 |
| 50 | 7.4 | Ceramic | Ceramic | A-5000-7755 | 000000000 | 00000 |
| 100 | 7.4 | Stainless Steel | Ceramic | A-5000-7727 | 000000000 | 000000 |
Material | ||||||
|---|---|---|---|---|---|---|
| Overall Lg., mm | Stem Dia., mm | Body | Stem | Manufacturer Model Number | Each | |
M3 × 0.5 mm | ||||||
| 13.3 | 7 | Stainless Steel | Stainless Steel | A-5004-7616 | 000000000 | 000000 |
M4 × 0.7 mm | ||||||
| 8 | 6.92 | Stainless Steel | Stainless Steel | A-5004-7598 | 000000000 | 0000 |
| 12 | 6.9 | Stainless Steel | Stainless Steel | A-5004-7621 | 000000000 | 00000 |
| 15 | 3.92 | Steel | Steel | A-5004-7443 | 000000000 | 00000 |
| 15.2 | 3.9 | Stainless Steel | Stainless Steel | A-5003-5171 | 000000000 | 00000 |
| 16 | 3.4 | Stainless Steel | Stainless Steel | A-5004-6723 | 000000000 | 00000 |
Male Mounting Thread | Female Mounting Thread | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Size | Pitch, mm | Overall Lg., mm | Stem Dia., mm | Body | Stem | Manufacturer Model Number | Each | |
| M3 | 0.5 | M2 | 0.4 | 5 | 4 | Stainless Steel | Stainless Steel | A-5004-7592 | 000000000 | 000000 |
| M4 | 0.7 | M2 | 0.4 | 5 | 7 | Stainless Steel | Stainless Steel | A-5004-7595 | 000000000 | 00000 |
| M4 | 0.7 | M3 | 0.5 | 50 | 4.5 | Ceramic | Ceramic | A-5000-7751 | 000000000 | 00000 |
| M5 | 0.8 | M3 | 0.5 | 10 | 10 | Stainless Steel | Stainless Steel | A-5555-0227 | 000000000 | 00000 |
Machine Tool Indicators
Find the edge of a workpiece, align your setup, and inspect parts with one tool. Once installed in your milling machine spindle, these indicators can measure in three axes.
Dial indicators are IP67 rated for protection from dust and temporary water submersion.
LCD indicator is IP64 rated for protection from dust and splashing water. It has zero-position memory, also known as absolute (ABS) positioning, which saves the measuring position when the sensor is off. A zero-set button lets you start measuring at any point.
Measuring | Dial | Contact Point | Mounting Shank | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Increments | Accuracy | Dia. | Reading | Head Dia. | Lg. | Mounting Thread Size | Mounting Thread Pitch, mm | Material | Overall Lg. | Dia. | Lg. | Environmental Rating | Each | |
| 0"-0.15" | 0.0004" | ±0.0004" | 1.92" | 0-50 | 0.2" | 1" | M3 | 0.5 | Stainless Steel | 4.756" | 0.39" | 1" | IP67 | 0000000 | 0000000 |
| 0"-0.15" | 0.0004" | ±0.0004" | 2.6" | 0-50 | 0.2" | 1" | M3 | 0.5 | Stainless Steel | 6.37" | 3/4" | 2" | IP67 | 0000000 | 000000 |
Machine Tool Indicators | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring | Contact Point | Mounting Shank | Replacement Batteries | ||||||||||||||
| Range | Increments | Accuracy | Dial Dia. | Head Dia. | Lg. | Mounting Thread Size | Mounting Thread Pitch, mm | Material | Overall Lg. | Dia. | Lg. | Batteries Included | Environmental Rating | Each | Pkg. | ||
| 0"-0.15" | 0.00005" | ±0.0002" | 2.6" | 0.2" | 1" | M3 | 0.5 | Stainless Steel | 6.37" | 3/4" | 2" | Yes | IP64 | 0000000 | 000000000 | 0000000 | 00000 |
Non-Contact Multitools
Open doors, pull levers, and push buttons with these multitools to avoid touching surfaces with your hands. They also have a touch-screen stylus that works with ATMs, pin pads, and checkout registers. These tools are made from copper alloy, which inhibits the growth of bacteria. It's also durable and rust-resistant, so these tools hold up to everyday use. Use the keychain hole to hang them from key rings and lanyards, so they're always on hand.
Overall | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number of Tools | Tools Included | Tool Material | Length | Width | Thickness | Features | Each | |
| 3 | Button Presser, Door Opener, Touch Screen Stylus | Copper Alloy | 3 5/8" | 1 3/8" | 1/4" | Keychain Hole | 0000000 | 000000 |
Nonmarring Picks
Avoid nicking or scratching sensitive components. Also known as spudgers, these picks are good for adjusting small wires or separating press-fit plastic components.
Plastic picks are more durable than wood. Also known as black sticks.
Wood picks are the economical choice. Also known as orange sticks.
Style | Package | |||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Handle | Grip | Max. Temp., °F | Tip Type | Handle Material | Pkg. Qty. | Pkg. | |
Plastic Pick with Blunt Tips | ||||||||
| 7" | Straight | Plain | 175° | Fixed | Plastic | 10 | 00000000 | 000000 |
Plastic Pick with Blunt Tip × Straight Tip | ||||||||
| 6" | Straight | Plain | 175° | Fixed | Plastic | 10 | 00000000 | 00000 |
Wood Pick with Blunt Tips | ||||||||
| 7" | Straight | Plain | 212° | Fixed | Wood | 10 | 00000000 | 0000 |
Wood Pick with Blunt Tip × Straight Tip | ||||||||
| 7" | Straight | Plain | 212° | Fixed | Wood | 10 | 00000000 | 0000 |
Laser Pointers
Pointer with ball point pen, stylus, and LED flashlight can switch between being used as a pointer, stylus, or writing utensil with a twist of the body. Push a button to activate LED flashlight.
| Range (Laser Shape) | Features | Batteries Included | Each | |
Red Laser | ||||
|---|---|---|---|---|
| 1,500 ft. (Dot) | Ball Point Pen, Stylus, LED Flashlight | Yes | 0000000 | 000000 |
Calibration Styli for Quick-Connect Robot Tool Changers
Align your robot arm with work areas using these styli to make sure it will perform automated tasks accurately and won’t damage workpieces. Slide these styli into the quick-connect clamp on an end-of-robot-arm mount (sold separately). They show you exactly where your tool will touch, so you don’t have to test your application with trial and error. These styli are often used to guide robots to hole centers when attaching fasteners, or to help them find objects in pick-and-place applications. You can also use them to help your machine-vision camera recognize patterns and locations.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Wt. | Color | For Robot-Arm Mounting Adapter Material | Each | |
Anodized Aluminum | |||||
|---|---|---|---|---|---|
| 154 | 0.29 lbs. / 0.13 kg | Black | Aluminum | 00000000 | 000000 |
These mounts have standard ISO mounting hole patterns, so they’re compatible with the mounting hole patterns on most robot arms and tools. If you don't see your robot model number listed, measure the bolt circle diameter to determine mounting compatibility.
| Bolt Circle Dia. (Mount. Hole Pattern Compatibility) | Mounting Plate Dia., mm | Max. Load Cap. | Wt. | Lg., mm | Includes | Features | For Robot Arm Manufacturer (Series/Model Number) | Each | |
Low Profile—Black PTFE-Coated Aluminum (Bolt On) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) | 83 | 110 lbs. / 50 kg | 0.53 lbs. / 0.24 kg | 19 | __ | __ | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1600; IRB 2400; IRB 2600) Fanuc (CR 4iA, 7iA; CRX; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3, UR3e, UR5, UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 00000000 | 0000000 |
Utility—Black PTFE-Coated Aluminum (Bolt On) | |||||||||
| 31.5 mm (ISO 31.5) 40 mm (ISO 40) 50 mm (ISO 50) | 83 | 110 lbs. / 50 kg | 0.71 lbs. / 0.32 kg | 74 | Power/Signal Connector with 5-ft. Wire Leads | Dual 6 mm Pneumatic Pass-Throughs, M8 8-Pin Power/Signal Pass-Through | ABB (IRB 360 6/1600, 8/1130; IRB 120; IRB 140; IRB 1200; IRB 1410; IRB 1600; IRB 2400; IRB 2600) Fanuc (CR 4iA, 7iA; CRX; LR Mate 200iD/7L; M-20 iA) KUKA Robotics (KR 10 R1100-2) Omron (TM 5, 12, 14) Precise Automation (PAVP6; PF3400; PP100) Productive Robotics (OB7) Staubli (TX2 90) Universal Robots (UR3, UR3e, UR5, UR5e; UR10; UR10e; UR16; UR16e) Yaskawa/Motoman (GP 7, 8; MH 3BM, 3F, 5LS II, 5S II; MPP 3H, 3S) | 00000000 | 00000000 |
Precision Easy-View Electronic Edge Finders
These have a highly perceptive sensing system with a spring-loaded probe to allow for overrun without breaking. A bulb lights up to give you 360° visibility when positioning work surfaces and tools.
Note: These items will not work with nonconductive materials such as plastic and wood or with rotating surfaces such as spinning wheels.
Easy-View Electronic Edge Finders
A bulb lights up to give you 360° visibility when positioning work surfaces and tools.
Note: These items will not work with nonconductive materials such as plastic and wood or with rotating surfaces such as spinning wheels.
| Tip Dia. | Body Dia. | Overall Lg. | Accuracy | Material | Batteries Included | Each | |
| 0.2" | 1/2" | 3 15/16" | ±0.0005" | Stainless Steel | Yes | 0000000 | 000000 |
Height-Sensing Edge Finders
Measure and set cutting tool height. This tool has a highly perceptive sensing system with a spring-loaded probe to allow for overrun without breaking. A bulb lights up to give you 360° visibility when positioning work surfaces and tools.
Note: This item will not work with nonconductive materials such as plastic and wood or with rotating surfaces such as spinning wheels.
| Tip Dia. | Body Dia. | Overall Lg. | Accuracy | Material | Batteries Included | Each | |
| 0.31" | 1" | 2" | ±0.0002" | Steel | Yes | 0000000 | 0000000 |