Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Flashlights with a momentary light setting are good when you only need light in short bursts, such as during inspection work. They’ll produce light when you hold down the button.

Flashlights with a spot-to-flood beam let you adjust from a narrow spot beam to a wide flood beam by twisting the head. Flashlights with a spot beam cast a beam with a bright center to light up long distances. Flashlights with a flood beam cast a uniform spread of light to illuminate large areas.

If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Style B come stored in a clear case you can mount to the wall. Mounting hardware is included.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

Rated for use in environments where hazardous material is present. These flashlights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Flashlights with a bull’s eye beam have a bright center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP07 flashlights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

IP08 flashlights withstand continuous submersion according to the manufacturer's specific conditions; all at least meet IP07 standards for submersion in a maximum of one meter of water for up to 30 minutes.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Spot beam flashlights have a bright center for long-distance illumination. Flood beam flashlights are especially good for close-up tasks and inspection work.

Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

CE marked flashlights meet European health, safety, and environmental protection requirements.

Style A have two lenses that can cast light from the top or side of the flashlight. Both have a magnet that allows you to mount them to a nearby surface and keep your hands free for work.

Style D have a detachable power bank with a USB connection for charging small devices, such as phones. When they’re separated, cover the exposed ends of the bank and flashlight with the included caps. These flashlights are dimmable, and they revert to their most recent brightness setting when you turn them on.

Style E are also known as dive lights.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

Rated IP07, this headlamp withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It shines light on your work while keeping your hands free. This headlamp has long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. It casts a uniform beam that's especially good for close-up tasks and inspection work. Headlamps come on an adjustable elastic strap for normal wear. For secure wear over a hard hat, they also come with a rubber strap and snap-together fastener.

Headlamps with a battery life indicator let you know how close the batteries are to needing replacement. An LED light glows green when battery life is above 80%, yellow when it’s between 20% and 80%, and red when it’s below 20%.

Headlamps with a dimmable light conserve battery life.

Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Illuminate small spaces and mark locations with these reusable lightsticks.

Lightsticks with rechargeable batteries are best for lighting up small spaces. Press the button to turn them on and select the color of the beam. Charge them with a micro-USB cord (not included). They’ll glow red when charging and turn off when they’re done. To save battery, their lockout function keeps them from turning on by accident. Rated IP07, you can drop them in water and they’ll still work. These lightsticks have an S-hook for easy hanging.

360° lightsticks provide area-wide illumination.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Style C have a handle that folds down for compact storage.

IP07-rated lanterns withstand temporary submersion, so they’ll still work if you drop them in water.