We will reply to your message within an hour.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.
These clamps have a fixed hanger for rigid connections.
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
Join two beams in a straight line.
Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.
Support strut channel at a right angle to the beam.
Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Hold your smallest workpieces in these vises, which have a clamp-on base for quick installation and removal from a benchtop.
Quickly install and remove the clamp-on base from a benchtop.
Designed for precision grinding and inspection, the construction of these vises ensures workpieces are held perfectly square. They are also known as toolmakers’ vises.
The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.
Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.
Free up a hand while using your Dremel on a workpiece.
Ball-and-socket connections allow 360° positioning.
Heavy duty construction adds strength for higher load capacities than other positioning arms.
A swivel caster lets you reposition your load.
Use these accessories to mount carriers to your machinery without creating an obstruction.
Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.
Clamp these brackets onto a rod or tubing that's up to 3/4" in diameter.