A toothed clip secures these clamps to the beam—no fasteners required.

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

Support and position workpieces and fixtures from the bottom or side. These buttons press into a drilled hole for permanent installation.

Install these pins in a plate or table and mate with holes in a workpiece for precise alignment.

The shoulder provides a consistent height reference point and keeps the pin from being pressed through the fixture.

The head on these pins slides side-to-side in one direction. Use one of these pins and one standard round-head pin to prevent jamming when loading and unloading workpieces with inconsistent hole spacing.

As the workpiece pushes against the pin head in one direction, the internal spring pushes back to hold it in place for clamping.

The shoulder on these tooling balls provides a consistent height reference point.

Once the end is clinched in place, panels with keyholes easily slide on and off these supports.

These standoffs are designed to fit in the limited space of compact electronics such as laptops and hand-held devices.