With a slim base and a short barrel, these weld nuts fit in tight spaces, such as channels, and in low-clearance areas.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these steel weld nuts from deforming.

Install threads in channels and other tight spaces where round-base weld nuts won’t fit.

Projections on the base of these steel nuts concentrate your weld and create room for heat to dissipate, protecting threads from deforming. Weld them to uncoated steel channels and other tight spaces where round-base weld nuts won't fit.

Projections on the base of these nuts concentrate your weld and create room for heat to dissipate, protecting threads from deformation. Made of 18-8 stainless steel, these nuts withstand mild chemicals and can be used in wet and outdoor environments.

Weld these nuts to stainless steel surfaces.

To protect their threads from deforming, these steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of uncoated steel sheets.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Projections on the base concentrate the weld and provide room for heat to dissipate.

Add corrosion-resistant threads to stainless steel sheets, even in spaces with low clearance.

The three weld points on these metric hex nuts create a secure hold on a steel surface.

You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Irregularly shaped threads in these nuts form a tight grip, preventing screws from backing out in vibration-heavy environments.

Threads float inside the retainer so you can install a bolt at a slight angle to align with off center parts.

Install strong, permanent threads in sheet metal to create a 90° joint.

Add strong threads to material that you can't drill or that's too thin to grip a threaded insert. These nuts are ideal for brittle plastics or tough composites, such as acrylic or carbon fiber.

Fit these nuts into channels, corners, and other tight spaces to add strong threads without drilling a hole. They’re ideal for material that’s too thin or too hard and brittle to drill, such as acrylic and carbon fiber.

Adhere or mold these nuts onto a surface without gunking up the threads—the closed end blocks out adhesive, resin, and debris. Made of 316 stainless steel, they resist corrosion from salt water and harsh chemicals.

These screw-mount nuts are often used to attach glides and levels to wood.