Compress sleeves with less effort than standard compression tools.

These compression sleeves are designed to meet lifting specifications.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Using a hammer, tap these expanders into the end of a tube to allow a second piece of the same diameter to fit inside.

Enlarge the end of a tube to allow a second piece of the same diameter to fit inside.

Stretch the end of soft plastic and rubber tubing to make room for fittings with the same or slightly larger diameter.

Form 45° flares in aluminum, brass, or copper tubing so it’s compatible with flared tube fittings often used in low-pressure plumbing, air conditioning, and refrigeration systems.

Ream and flare both soft and hard metal tubing with these tools.

Flare soft metal tubing.

Create 45° flares for low-pressure applications.

Repair ends of thin-wall (EMT) conduit that have been warped by cutting.

Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.

Crimpers are furnished with five removable dies that crimp air and water hose.

Install low-profile band clamps, or fit a cutting adapter over the tool to install Extra-Strength Low-Profile Band Clamps.

This tool is longer than the light duty tool for increased leverage.

This optional tool offers a quick and easy way to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut push-on hose without fraying. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.

Crimp pinch clamps closed on hose and tube. Also known as pinch clamp pincers.