We will reply to your message within an hour.
More
Because these switches mount flush against a panel, they're easy to clean and hard to damage.
The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.
A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.
More durable than standard metal switches, these can handle tough, repetitive use.
Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.
The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.
Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.
Immediately cut power with a single push.
Save space on a panel by using one switch to perform multiple switching functions.
Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.
Also known as tactile switches, these are small enough to fit inside a computer keyboard.
Install in 16 mm dia. cutouts.
Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.
Install in 14 mm dia. cutouts.
Install in 12 mm dia. cutouts.
Rated NEMA 4X and 13, all switches resist corrosion and can withstand washdowns and oil/coolant spraying.
More lightweight than steel or stainless steel, these aluminum enclosed switches are rated NEMA 4X for protection from corrosion and washdowns.
With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.
Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.
These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.
A red light flashes when the actuator is pushed, making it easy to see from a distance. They're rated IP65 for protection from washdowns.
Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.
Often used to trigger alarms, these switches have a recessed button to prevent accidental activation. Mount under desks or in other discrete locations to avoid drawing attention.
These familiar push-button switches mount to flat surfaces.
Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.
Choose an actuator and contact block to make your own 22 mm plastic switch.
Choose an actuator and contact block to make your own 30 mm switch.
Choose an actuator and contact block to make your own 22 mm metal switch.
Choose an actuator and contact block to make your own 16 mm switch.
These switches withstand temporary submersion.
Use these hand-held switches with mobile machinery.
With a slim shape, these switches fit comfortably in your hand.
Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.
A durable rubber housing covers the buttons and protects these switches from impact.
Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.
The lever sticks out further than a push button, making it easy to identify the position of these switches.
It takes two hands to activate these switches, minimizing the risk of accidental equipment start up.
Combine a push-button actuator with a switching mechanism to build a complete switch.
More precise than analog potentiometers, these have a three-digit display that is easy to read.
Halt machinery in an instant with these tablet holders. They equip your tablet with safety switches that meet IEC and EN standards, so you can safely move around your equipment while teaching robots or monitoring production lines and conveyor systems.
Create one action with these valves, such as extending a cylinder.
Since both hands are required to simultaneously press the buttons, these valves protect workers from accidental machinery start-up. They create one action, such as extending a cylinder.
Often used to extend and then retract a cylinder at different speeds, these valves create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves.
Since both hands are required to simultaneously press the buttons, these valves protect workers from accidental machinery start-up. They create two actions, such as extending and then retracting a double-acting cylinder.