A quick push is all it takes to actuate these switches.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.

Choose an actuator and contact block to make your own 22 mm metal switch.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation.

With no moving parts, these solid state relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, which protects components from voltage spikes, amplifies the relay’s signal, and reduces interference for reliable transmission.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

Receive signals from safety monitoring relays or controllers to switch devices off and on because of a system failure.

These relays pair the transmission reliability of an interface relay with the fail-safe operation of a safety relay. They have interlocking contacts—also known as force-guided or mechanically linked contacts—so opposing contacts won't close at the same time.

Remotely control these relays through an app on your smartphone—they simultaneously monitor phase, voltage, and frequency.

Safeguard your equipment against overheating, wear, and malfunction from a spike or dip in voltage.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.

Ideal in systems with rapid, unpredictable, or complex temperature changes, these controllers turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control.

Switch heaters on or off when your process reaches a certain temperature. Both these controllers and your heater will be powered by the same wall outlet.

Also known as supplemental protectors, these circuit breakers mount directly to DIN rail downstream from a branch circuit breaker to protect a single piece of equipment.