Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Install in 12 mm dia. cutouts.

More lightweight than steel or stainless steel, these aluminum enclosed switches are rated NEMA 4X for protection from corrosion and washdowns.

Rated IP67, these switches are protected from temporary submersion.

With a slim shape, these switches fit comfortably in your hand.

The light touch of a finger turns circuits on and off without pressing down a contact.

Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.

Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.

Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for protection from temporary submersion.

Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

Often used with machine guards, these switches mount to a door frame.

Easily mount these flat switches to a base or rail.

With a smaller diameter and shorter length than standard sized switches, these fit in the most space-constrained areas.

Sense objects from farther away than with other DC proximity switches that have the same diameter.

These inductive proximity switches sense metallic objects each time they pass through the slot, even when they’re obscured by water, oil, dirt, or a surface finish. Use them to measure the speed of rotating equipment and to count or detect moving objects, such as sheet metal being fed into a stamping process.

Turn the face on these switches to sense metallic objects from the front, sides, top, or bottom.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

These intrinsically safe switches detect objects as they’re routed through the ring. They produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks. Switches are ATEX certified to protect against explosion.

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.

A built-in relay produces AC voltage output. These switches are often used with older programmable logic controllers (PLCs).

Light beams travel up to 32 ft. between the transmitter and receiver.

For optimal performance in tight spaces, these switches have a smaller beam and can detect smaller objects than standard photoelectric switches.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

Safely detect the presence or absence of an object moving at high speeds with a light beam. These switches produce a low-current, low-voltage NAMUR signal, so they won’t create sparks or ignite. ATEX and IECEx certified, they protect against explosion in environments containing flammable gases and combustible dust.

These switches use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or produce sparks. ATEX certified, they protect against explosion in environments containing flammable gases and combustible dust. Switches sense both metallic and nonmetallic objects.

These switches sense when a valve is open or closed, supporting flow and temperature control within your system and offering reliable feedback.

Wire contacts to an alarm system to alert when doors or windows are opened.

With a round body that’s at least one-third thinner than traditional pressure switches, these fit in tight, cramped spaces.

When these switches reach either of their two set pressures—both of which can be controlled from a display—they send digital signals to your programmable logic controller (PLC) to activate automated controls or alarms.

Send two digital signals to your programmable logic controller (PLC) to trigger different processes—these switches activate at two set pressures.

When these 3-A certified switches reach a set pressure or vacuum, they trigger controls and alarms in food-processing, pharmaceutical, and biotech lines.

Detect when oil rises on water, foam forms on beer, and tanks empty, triggering pumps and valves in food and sanitary lines. These switches are 3-A and European Hygienic Engineering and Design Group (EHEDG) certified since they’re easy to keep clean.

Mix and match valve styles on one manifold to meet your control needs. Mount multiple valves to a manifold to reduce piping requirements and create multiple actions from a single pressure input.

Direct flow with an electronic signal.

Rated for use in environments where hazardous material is present.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Gooseneck arms can be repositioned faster and more easily than articulating arms.