Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

Choose an actuator and contact block to make your own 22 mm plastic switch.

The light touch of a finger turns circuits on and off without pressing down a contact. Program these switches to fit your application—control their color, pattern, and sensitivity.

Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion.

The convenient, modern alternative to mechanical safety switches. These RFID switches are easier to install, fit a wider range of access points, and can mount horizontally.

These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).

Sense objects from farther away than with other DC proximity switches that have the same diameter.

Turn the face on these switches to sense metallic objects from the front, sides, top, or bottom.

Detect the presence or absence of an object moving at high speeds with a light beam. These switches have a longer sensing distance than proximity and ultrasonic switches.

Maintain sanitary standards—these switches have smooth surfaces without crevices, so they prevent bacteria from building up and are easy to clean.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.

With a single device, continuously monitor the distance of moving items and turn equipment on and off based on their position.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Rated IP69K, these valves withstand high-pressure, high-temperature washdowns. Their smooth design keeps out dust, dirt, and contaminants, making them easier to keep clean. Apply voltage to the electrical connection to actuate.

Detect when oil rises on water, foam forms on beer, and tanks empty, triggering pumps and valves in food and sanitary lines. These switches are 3-A and European Hygienic Engineering and Design Group (EHEDG) certified since they’re easy to keep clean.