We will reply to your message within an hour.
Protect toggle switches from moisture and dust by replacing panel mounting nuts with these rubber covers.
A nickel-plated brass cap protects toggles from impact.
Create a seal around the base of a toggle while leaving the actuator exposed.
These rubber covers protect switches from splashing liquid.
Rated NEMA 6P and IP68, these switches are protected against washdowns, corrosion, and temporary submersion.
Rated NEMA 6P, 13, and IP68, these switches protect against corrosion, washdowns, and temporary submersion.
Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.
Use these switches where ignitable gas and dust may be present. They meet NEC Class I, Division 1, Groups B, C, and D; and Class II, Division 1, Groups E, F, and G for hazardous locations.
These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).
Sense objects from farther away than with other DC proximity switches that have the same diameter.
These switches have a longer sensing distance compared to other proximity switches with the same diameter.
The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.
Set these switches to delay activation by up to fifteen seconds after detecting an object.
Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.
These valves are rated for environments where hazardous material is present. They actuate when voltage is applied to the electrical connection.