These switches meet MIL-S-3950.

Often used to trigger alarms, these switches have a recessed button to prevent accidental activation. Mount under desks or in other discrete locations to avoid drawing attention.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Able to withstand high currents, these switches are often used with motors and pumps.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Rated NEMA 3S, 4X and 13, these switches are protected from corrosion, washdowns, and oil/coolant spraying.

Choose an actuator and contact block to make your own 22 mm metal switch.

These switches withstand temporary submersion.

Use these switches to turn motors on and off, or with lighting and electric heat circuits. They do not provide overload protection.

Use these switches where ignitable gas and dust may be present. They're rated Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G for hazardous locations.

For use with equipment that cycles on and off, these relays meet UL 508 for air conditioning and heating. Also known as definite-purpose contactors.

The built-in enclosure protects contacts from dust and dirt.

With no moving parts, these solid state medium-current relays have an extended service life.