Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.

Save space on a panel by using one switch to perform multiple switching functions.

Immediately cut power with a single push.

Rated NEMA 4X and 13, all switches resist corrosion and can withstand washdowns and oil/coolant spraying.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

Switches are rated NEMA 4, 13, and IP66.

Choose an actuator and contact block to make your own 30 mm switch.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems. Equipment will not start up again until switch is manually reset.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meets MIL-PRF-8805.

These switches actuate with the slightest push for a high degree of accuracy.

Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.

Install these switches into a threaded connection in your tank wall from outside the tank.

Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

For visual monitoring and easy access, these switches are housed in a clear acrylic reservoir that mounts to the outside of your tank.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from outside the tank.

Empty and fill your tank with a single device—this dual-level switch includes two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Hang these free-floating switches in your tank for liquid-level monitoring that doesn't require installation through a tank wall.

Mount these switches from outside the tank through a threaded connection at the top or bottom of your tank.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Install these switches into a threaded connection in your tank wall from outside the tank.

Detect chemical level with infrared light to avoid false switch activation caused by vibration in your tank.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from inside the tank.