A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications. These switches immediately cut power with a single push. All meet EN 60947-5-5 for compliance with European machine directives for emergency stop applications. They have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. These switches meet American, Canadian, European, and other global safety requirements. They’re rated NEMA 4X, NEMA 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying.

Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

When-on illuminated switches light up when you push the button, so you can tell if the power has been cut.

Continuously illuminated switches stay lit once installed for high visibility in dark areas.

For technical drawings and 3-D models, click on a part number.

With a slim shape, these switches fit comfortably in your hand. Use them with mobile machinery such as cranes, hoists, and trolleys.

Two-speed switches have staged contacts. When you push the button, it will first actuate the slow speed. Continue to push for the additional speed to be actuated.

Switches with mechanical interlock prevent both buttons from operating simultaneously.

NEMA 4X rated switches protect against corrosion.

For technical drawings and 3-D models, click on a part number.