Simple to use, these switches actuate with a quick push.

More durable than standard metal switches, these can handle tough, repetitive use.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Immediately cut power with a single push.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.

Choose an actuator and contact block to make your own 22 mm metal switch.

Control multiple devices with one switch. Turn the shaft to change switch positions.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.

Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. They’re often used with machine guards.

These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.