Clear All

	Actuator Style Actuator Style

	Push Button

	Switching Voltage Switching Voltage

120V AC

24V DC

	Switch Action Switch Action

Stays Switched (Maintained)

Springs Back (Momentary)

	System of Measurement System of Measurement

Inch

	Switching Current Switching Current	Show

5.75A

	Switching Current Switching Current	Hide

	Environment Environment

	For Panel Cutout Diameter For Panel Cutout Diameter

1 3/16"

30 mm

31 mm

	Push-Button Style Push-Button Style


Flush	Projecting

Mushroom

	Environmental Rating Environmental Rating

IP65

NEC Class I Division 2
Groups B, C, D

NEC Zone 2 Groups IIB,
IIA

NEMA 4X

	Actuator Color Actuator Color

	Black
	Green
	Red

	Reset Type Reset Type

Turn

Pull

	Diameter Diameter

1 3/8"

1 1/2"

	Illumination Illumination

Not Illuminated

	Protection Type Protection Type

Explosion Proof

	Mounting Location Mounting Location

Panel

	Number of Circuits Controlled Number of Circuits Controlled

	Switch Starting Position Switch Starting Position

1 Off (Normally Open) and 1
On (Normally Closed)

	Industry Designation Industry Designation

DPST-1NO/1NC

	Switch Type Switch Type

Manual

	Specifications Met Specifications Met

CE Marked

CSA

	Actuator Material Actuator Material

Plastic

	Depth Behind Panel Depth Behind Panel

2 3/16"

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	For Maximum Number of Contact Blocks For Maximum Number of Contact Blocks

View catalog pages (2)

Forward

How can we improve?

8 Products

Choosing an Electrical Switch

Hazardous Location 30 mm Panel-Mount Push-Button Switches

Use these switches where ignitable gas and dust may be present. Their contact blocks are explosion proof and UL listed for Class I, Division 2, Groups B, C, and D hazardous locations. All are rated NEMA 4X and IP65 for protection from corrosion and washdowns. They include enough contact blocks to control the number of circuits listed.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

Flush

Projecting

Plastic Base with Screw Terminals
No. of Circuits Controlled	Switch Starting Position	Switch Action	No. of Terminals	Industry Designation	Actuator Color	Switching Current @ Voltage	Max. Voltage	Dia.	For Max. Panel Thick.	Dp. Behind Panel	For Max. No. of Contact Blocks		Each
Flush
2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	Black	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 3/8"	3/8"	2 3/16"	2	000000	000000
2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	Green	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 3/8"	3/8"	2 3/16"	2	000000	00000
2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	Red	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 3/8"	3/8"	2 3/16"	2	000000	00000
Projecting
2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	Black	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 3/8"	3/8"	2 3/16"	2	000000	00000
2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	Red	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 3/8"	3/8"	2 3/16"	2	000000	00000

Contact Blocks

No. of Circuits Controlled	Switch Starting Position	No. of Terminals	Industry Designation		Each
2	1 Off (Normally Open) and 1 On (Normally Closed)	4	DPST-1NO/1NC	0000000	000000

Hazardous Location 30 mm Emergency Stop Panel-Mount Push-Button Switches

Switches immediately cut power with a single push. Use these switches where ignitable gas and dust may be present. Their contact blocks are explosion proof and UL listed for Class I, Division 2, Groups B, C, and D hazardous locations. All are rated NEMA 4X and IP65 for protection from corrosion and washdowns. They include enough contact blocks to control the number of circuits listed.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

Metal Base with Screw Terminals
No. of Circuits Controlled	Switch Starting Position	Switch Action	No. of Terminals	Industry Designation	Actuator Color	Switching Current @ Voltage	Max. Voltage	Dia.	Dp. Behind Panel	For Max. No. of Contact Blocks		Each
Pull Reset
2	1 Off (Normally Open) and 1 On (Normally Closed)	Stays Switched (Maintained)	4	DPST-1NO/1NC	Red	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 1/2"	2 3/16"	2	000000	0000000
Turn Reset
2	1 Off (Normally Open) and 1 On (Normally Closed)	Stays Switched (Maintained)	4	DPST-1NO/1NC	Red	6 A @ 120 V AC, 5.75 A @ 24 V DC	250V DC 600V AC	1 1/2"	2 3/16"	2	000000	000000

Contact Blocks

No. of Circuits Controlled	Switch Starting Position	No. of Terminals	Industry Designation		Each
2	1 Off (Normally Open) and 1 On (Normally Closed)	4	DPST-1NO/1NC	0000000	000000