We will reply to your message within an hour.
These switches meet MIL-S-3950.
Able to withstand high currents, these switches are often used with motors and pumps.
Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.
Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.
It takes two hands to activate these switches, minimizing the risk of accidental equipment start up.
Activate or deactivate fans, lights, and other devices inside your enclosure when you open or close the door.
Often used with machine guards, these switches mount to a door frame.
Using a low-current signal, these relays are often used to control small motors and heaters.
Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation.
Prevent damage from voltage spikes, reduce signal interference, and amplify signal with these relays, which interface between your controller and components to isolate input and output circuits.
Solder these relays directly to printed circuit boards using their solder pin terminals.
Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.
Use the screw terminals to hardwire these relays.
Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.
Turn machinery, such as paint and conveyor lines, on and off after a set period of time.
Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.