We will reply to your message within an hour.
More
Built into a terminal block, these switches mount to DIN rail.
Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.
The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.
More durable than standard metal switches, these can handle tough, repetitive use.
Able to handle tough, repetitive use, these switches are more durable than standard plastic switches.
Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.
Immediately cut power with a single push.
Save space on a panel by using one switch to perform multiple switching functions.
Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.
Install in 16 mm dia. cutouts.
Install in 12 mm dia. cutouts.
Rated NEMA 4X and 13, all switches resist corrosion and can withstand washdowns and oil/coolant spraying.
More lightweight than steel or stainless steel, these aluminum enclosed switches are rated NEMA 4X for protection from corrosion and washdowns.
With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.
Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.
These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.
Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.
Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.
Rated IP67 for protection from dust and temporary submersion.
Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.
These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.
Switches are rated NEMA 4, 13, and IP66.
Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.
These plastic switches are rated NEMA 4X, 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying. Install them in 30 mm dia. cutouts.
Rated NEMA 3S, 4X and 13, these switches are protected from corrosion, washdowns, and oil/coolant spraying.
Use these switches where ignitable gas, dust, and fibers may be present. They're UL and C-UL listed for hazardous locations.
Choose an actuator and contact block to make your own 22 mm plastic switch.
Choose an actuator and contact block to make your own 30 mm switch.
Choose an actuator and contact block to make your own 22 mm metal switch.
These switches withstand temporary submersion.
Use these hand-held switches with mobile machinery.
With a slim shape, these switches fit comfortably in your hand.
Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.
A durable rubber housing covers the buttons and protects these switches from impact.
Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.
Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.
Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.
Turn these switches by hand.
Pull the hanging rope in any direction to actuate these switches.
Immediately cut power by pulling the cable.
Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems. Equipment will not start up again until switch is manually reset.
An infrared light beam senses the lightest finger contact to switch a circuit on or off.
Grab these switches by hand and pivot them to use.
With a rubber-encased housing and stainless steel bracket, these switches resist vibration and corrosion. They're rated IP68 for protection from dust and temporary submersion.
Often used with machine guards, these switches mount to a door frame.
Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.
Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. They're also known as three-way and four-way switches.
Control lights by transmitting a wireless signal from these switches to a control relay on your fixture.
Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.
Prevent accidental activation—these switches require a key to turn lights on and off.
Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate.
These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.
Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.
Often used as position indicators, pump level controls, and machine limit switches, these switches actuate when tilted to a certain angle.
Control equipment with high currents, such as landscape lighting, pumps, and heaters.
Program these switches to turn a device on and off at a set time and day.
Designed to work with landscape and security lighting.
Switches fit single device (1 gang) outlet boxes.
Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.
Control two devices and delay the shut off of one device by up to one hour. These switches are often used with lights and fans for ventilation.
Control equipment with high currents such as air conditioners, heaters, and ventilation fans.
Push and release the button to activate—no electricity required.
Install these switches in a panel cutout to automatically turn electrical equipment on or off after a set interval.
The large face makes these switches easy to read from a distance.
Press these switches with your foot for convenient, hands-free operation.
Open or close a circuit when a fusible link melts. These switches are often used as a safety switch to shut off hydraulic equipment.
If there’s a power outage, flip the toggle for each circuit on these switches to backup power.
When the microcontroller inside detects a power outage, these switches automatically fire up a backup generator. They’ll switch back to utility power once power is restored.
Using a low-current signal, these relays are often used to control small motors and heaters.
With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.
Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.
These relays are rated for motors with 1-3 horsepower or 15-90 amps—use them with industrial automation systems, security and emergency lighting, and small motors. Also known as power relays.
These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.
Attach these relays to a flat surface using the mounting hole. They have no moving parts, so compared to mechanical switches, they require less maintenance, last longer, and are quieter.
Set to a specific speed to detect unwanted machinery slowdown that can cause damage and downtime.
These boxes come ready to use with receptacles and/or light switches installed.