Filter by
Actuator Style
Switching Voltage
Mounting Thread Size
Switch Action
Switch Designation
Mounting Location
Number of Circuits Controlled
Wire Connection
Switch Type
Environment
Switch Starting Position
Panel Cutout Diameter
Certification
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Housing Diameter
Mounting Thread Type
REACH
RoHS
Wire Lead Gauge (AWG)
Housing Finish
Choosing an Electrical Switch
More
Panel-Mount Light-Touch Limit Switches
Our most sensitive limit switches, these switches actuate with the slightest push for a high degree of accuracy. They’re often used for determining manufacturing tolerances and detecting minute expansions and contractions. When an object pushes into the plunger actuator, it sends a signal to open or close a circuit. Install them in a standard panel cutout.
IP67 rated switches are protected from temporary submersion. They’re ideal for wet locations.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | Switch Action | Industry Designation | Switching Current @ Voltage | Max. Voltage  | Operating Temp. Range, °F | Actuator Ht., mm | No. of Wire Leads | Cable Lead Lg., ft. | Housing Ht., mm | Housing Material | Actuator Material | For Panel Cutout Dia. | Environmental Rating | Each | |
Plunger Actuator Style | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
With Wire Leads | ||||||||||||||||
| 1 | 1 On (Normally Closed) | Springs Back (Momentary) | SPST-NC | 50 mA @ 24 V AC, 2 mA @ 15 V DC | 24V AC 15V DC | -4° to 167° | 3.5 | 2 | 2 1/2 | 18 | Nickel-Plated Brass | Zirconium Ceramic | 0.31" | IP50 | 0000000 | 0000000 |
| 1 | 1 On (Normally Closed) | Springs Back (Momentary) | SPST-NC | 50 mA @ 24 V AC, 2 mA @ 15 V DC | 24V AC 15V DC | -4° to 167° | 4 | 2 | 2 1/2 | 21 | Nickel-Plated Brass | Ruby | 0.31" | IP67 | 0000000 | 000000 |