Able to withstand high currents, these switches are often used with motors and pumps.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Actuate these switches with a quick push.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Keep your hands free for other tasks by triggering switches with your foot.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Step on these switches for hands-free actuation in an area with frequent washdowns.

These switches are rated for environments where hazardous material is present.

Reset fire panels, or open electromagnetic locks, electric strikes, and automatic door openers. These switches require a key to turn circuits on or off, limiting access and preventing accidental activation.

Pull the chain to send a switch signal. These switches are commonly used as replacements in lights and fans.

Open and close circuits in a snap. These switches actuate quickly to minimize arcing and prevent contacts from sticking.

Enclosures protect these snap-acting switches from the environment.

Rated IP67, these switches have an enclosure that shields their interior during temporary submersion. They open and close circuits in a snap—their quick actuation minimizes arcing and keeps contacts from sticking.

At least 25% smaller than our Miniature Snap-Acting Switches, these switches are often used to trigger actions from inside a vehicle’s door or an engine compartment.

Smaller than standard size snap-acting switches, these fit in tight spaces.

When a moving object contacts the actuator on these switches, they open or close a circuit. They have the rapid-closing action of a snap-acting switch, but with a larger actuator for large objects.

Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.

A built-in relay produces AC voltage output. These switches are often used with older programmable logic controllers (PLCs).

Set these switches to delay activation by up to fifteen seconds after detecting an object.

Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.

Mount these switches to a flat surface or attach to DIN rail.

Install these switches in a panel cutout.