Choosing an Electrical Switch
More
Washdown 3/4" Panel-Mount Key Switches
Rated NEMA 4 or IP66, these switches are protected from washdowns. They require a key to turn circuits on or off, limiting access to sensitive equipment. All fit into a standard panel cutout.
Keyed alike switches all open with the same key.
Keyed differently switches each open with a unique key.
For technical drawings and 3-D models, click on a part number.
Key Switches | Replacement Keys | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Circuits Controlled | Switch Starting Position | Switch Action | No. of Terminals | Industry Designation | Switching Current @ Voltage | Max. Voltage  | Dia. | Dp. Behind Panel | No. of Keys Included | Key Removal Position | Environmental Rating | Each | Each | ||
2 Position with Metal Base | |||||||||||||||
Keyed Alike with Screw Terminals | |||||||||||||||
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Stays Switched (Maintained) | 4 | DPST-1NO/1NC | 10 A @ 300 V AC/24 V DC | 24V DC 300V AC | 7/8" | 1 7/8" | 2 | Center, Right | NEMA 4, IP66 | 0000000 | 000000 | 000000 | 00000 |
Keyed Differently with Screw Terminals | |||||||||||||||
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Stays Switched (Maintained) | 4 | DPST-1NO/1NC | 10 A @ 300 V AC/24 V DC | 24V DC 300V AC | 7/8" | 1 7/8" | 2 | Center, Right | NEMA 4, IP66 | 0000000 | 00000 | 000000 | 00 |
Limit Switches
When a moving object contacts the actuator on these switches, they open or close a circuit. They have the rapid-closing action of a snap-acting switch, but with a larger actuator. This makes them a good choice for use with large objects—for instance, a box on a conveyor runs into the switch, stopping the conveyor.
Switches with a plunger actuator require a push to actuate, similar to a button.
Switches with a roller plunger or cross roller plunger actuator have a roller that moves when an object pushes the actuator. This reduces friction during actuation to limit wear and tear on your switch.
Switches with a roller lever actuator use a lever with a roller at the end to activate. This allows parts to glide across the actuation surface with minimal friction, limiting wear and tear on your switch.
Switches with a rod actuator use a rod extending out of the body to actuate, so they’ll activate even if an object is far away.
Switches with a wobble stick actuator have an arm that rotates 360°, so you don’t need to align it in a specific direction. Since the actuator is flexible, it won’t snap if pushed backward. That makes these switches a great choice for systems that get jammed often.
Styles E and F let you adjust the actuator’s height to align it with your target.
Switches rated IP67 are protected against dust and temporary submersion.
For technical drawings and 3-D models, click on a part number.
Housing | Conduit | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | No. of Circuits Controlled | Switch Starting Position | Switch Action | Industry Designation | Switching Current @ Voltage | Max. Voltage | Operating Temp. Range, °F | Actuator Ht. | Lg. | Ht. | Dp. | Housing Material | Trade Size | Environmental Rating | Each | |
Plunger Actuator Style | ||||||||||||||||
With Screw Terminals | ||||||||||||||||
| A | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 1.1" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 000000 |
Roller Plunger Actuator Style | ||||||||||||||||
With Screw Terminals | ||||||||||||||||
| B | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 1.6" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 00000 |
Roller Lever Actuator Style | ||||||||||||||||
With Screw Terminals | ||||||||||||||||
| D | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 2.2" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 00000 |
| E | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 1.7"-4.2" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 00000 |
Rod Actuator Style | ||||||||||||||||
With Screw Terminals | ||||||||||||||||
| F | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 1.4"-5.9" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 00000 |
Wobble Stick Actuator Style | ||||||||||||||||
With Screw Terminals | ||||||||||||||||
| H | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 24 V DC | 300V AC 250V DC | 14° to 176° | 5.3" | 1.6" | 2.7" | 1.6" | Aluminum | 1/2 | IP67 | 0000000 | 00000 |
Compact Safety Limit Switches
Shorter and thinner than other safety limit switches, these are sized to fit tight spaces. They protect machinery and ensure the safety of personnel. Positive-force contacts open the circuit when actuated, even if a spring fails or the contacts stick. They send a signal to your circuit when an object hits the actuator—for instance, a box on a conveyor runs into the switch, stopping the conveyor. They open and close circuits as fast as snap-acting switches, but they have a bigger actuator for large objects. All are NEMA and IP rated for protection from washdowns.
Switches with a plunger actuator require a push to activate, similar to a button.
Switches with a roller plunger actuator have a roller that moves parallel to the mounting direction when an object pushes the actuator. This reduces friction during actuation to limit wear and tear.
Switches with a roller lever actuator use a lever with a roller at the end to activate. This allows parts to glide across the actuation surface with minimal friction, limiting wear and tear.
Styles E and F have an actuator that allows you to adjust its height, making it easier to align the switch with the target during installation.
NEMA 13 and IP67 rated switches are protected from oil/coolant spraying and temporary submersion.
For technical drawings and 3-D models, click on a part number.
Housing | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | No. of Circuits Controlled | Switch Starting Position | Switch Action | Industry Designation | Switching Current @ Voltage | Max. Voltage | Operating Temp. Range, °F | Actuator Ht. | Wire Connection Type | Lg. | Ht. | Dp. | Housing Material | Environmental Rating | Each | |
Plunger Actuator Style | ||||||||||||||||
| A | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 10 A @ 250 V DC | 300V AC 250V DC | -40° to 185° | 0.7" | Screw Terminals | 1.2" | 2.4" | 1.2" | Zinc | NEMA 4, NEMA 13, IP66, IP67 | 0000000 | 000000 |
Roller Plunger Actuator Style | ||||||||||||||||
| B | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 10 A @ 250 V DC | 300V AC 250V DC | -40° to 185° | 1.1" | Screw Terminals | 1.2" | 2.4" | 1.2" | Zinc | NEMA 4, NEMA 13, IP66, IP67 | 0000000 | 000000 |
Roller Lever Actuator Style | ||||||||||||||||
| D | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 10 A @ 250 V DC | 300V AC 250V DC | -40° to 185° | 2.1" | Screw Terminals | 1.2" | 2.4" | 1.2" | Zinc | NEMA 4, NEMA 13, IP66, IP67 | 0000000 | 00000 |
| E | 1 | 1 Off (Normally Open) or 1 On (Normally Closed) | Springs Back (Momentary) | SPDT | 10 A @ 300 V AC, 10 A @ 250 V DC | 300V AC 250V DC | -40° to 185° | 0.9"-3" | Screw Terminals | 1.2" | 2.4" | 1.2" | Zinc | NEMA 4, NEMA 13, IP66, IP67 | 0000000 | 00000 |
Harsh Environment Panel-Mount Disconnect Switches
Rated IP69K, these switches withstand high-pressure, high-temperature washdowns. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All have a lockout so you can secure them in the off position with a padlock (not included).
For technical drawings and 3-D models, click on a part number.
Switching | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Current, A | Voltage | Switch Action | Industry Designation | Electrical Phase (hp) | Dia. | Ht. | Wd. | Dp. Behind Panel | Each | ||
Yellow Stainless Steel Housing with Red Actuator | |||||||||||
2 Circuits with Lockout—For 7/8" Panel Cutout Dia. | |||||||||||
| A | 20 | 300V AC | Stays Switched (Maintained) | DPST | Single (3/4 hp @ 120 V AC) Single (2 hp @ 240 V AC) Three (2 hp @ 240 V AC) | 3 15/16" | __ | __ | 2 15/16" | 00000000 | 0000000 |
4 Circuits with Lockout—For 7/8" Panel Cutout Dia. | |||||||||||
| A | 20 | 300V AC | Stays Switched (Maintained) | 4PST | Single (3/4 hp @ 120 V AC) Single (2 hp @ 240 V AC) Three (2 hp @ 240 V AC) | 3 15/16" | __ | __ | 3 3/8" | 00000000 | 000000 |
Gray Stainless Steel Housing with Gray Actuator | |||||||||||
2 Circuits with Lockout—For 7/8" Panel Cutout Dia. | |||||||||||
| C | 20 | 300V AC | Stays Switched (Maintained) | DPST | Single (3/4 hp @ 120 V AC) Single (2 hp @ 240 V AC) Three (2 hp @ 240 V AC) | __ | 3 1/8" | 2 3/4" | 2 15/16" | 00000000 | 000000 |
4 Circuits with Lockout—For 7/8" Panel Cutout Dia. | |||||||||||
| C | 20 | 300V AC | Stays Switched (Maintained) | 4PST | Single (3/4 hp @ 120 V AC) Single (2 hp @ 240 V AC) Three (2 hp @ 240 V AC) | __ | 3 1/8" | 2 3/4" | 3 3/8" | 00000000 | 000000 |
| "Main Switch" Label with Adhesive Back—13/16" Ht. × 3 3/16" Wd. | 0000000 | Each | 000000 |
Solid State Screw Terminal Relays
With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.
Relays with high-starting-current protection are designed with integrated circuits that prevent damage from the large burst of electricity when a device, such as a motor or pump, turns on.
Heat sinks disperse heat to increase the relay’s current rating. Mount them to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. They also mount to flat surfaces. Before mounting one-circuit relays, silicone compound or a thermal pad should be placed between the heat sink and relay. Silicone compound is sold separately for heat sinks that do not include it but require it. Two-circuit relays don’t require silicone for mounting.
Relays | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Switching Current | Heat Sinks | |||||||||||
| Number of Terminals | Input Voltage | Without Heat Sink | With Heat Sink | Switching Voltage | Max. Switching Voltage | Ht. | Wd. | Dp. | Each | Each | ||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||||
Relays with High-Starting-Current Protection | ||||||||||||
| 4 | 70V AC, 120V AC, 140V AC | 7.5A | 25A | 300V AC | 300V AC | 2.3" | 1.8" | 1.1" | 0000000 | 0000000 | 0000000 | 0000000 |
| 4 | 12V AC, 24V AC, 3V DC, 6V DC, 12V DC, 24V DC, 30V DC | 7.5A | 25A | 300V AC | 300V AC | 2.3" | 1.8" | 1.1" | 0000000 | 000000 | 0000000 | 000000 |
1 Circuit Controlled with 1 On (Normally Closed)—SPST-NC | ||||||||||||
Relays with High-Starting-Current Protection | ||||||||||||
| 4 | 70V AC, 120V AC, 140V AC | 7.5A | 25A | 300V AC | 300V AC | 2.3" | 1.8" | 1.1" | 0000000 | 000000 | 0000000 | 000000 |
| 4 | 12V AC, 24V AC, 3V DC, 6V DC, 12V DC, 24V DC, 30V DC | 7.5A | 25A | 300V AC | 300V AC | 2.3" | 1.8" | 1.1" | 0000000 | 000000 | 0000000 | 000000 |