Movement Movement | Show |
---|
![]() | 360° Swivel |
Movement Movement | Hide |
---|
![]() | ![]() |
180° Pivot | 360° Swivel |
Thread Size Thread Size |
---|
Thread Length Thread Length |
---|
Vertical Capacity Vertical Capacity |
---|
|
Material Material |
---|
|
Finish Finish |
---|
|
Overall Height Overall Height |
---|
Inside Width Inside Width |
---|
Specifications Met Specifications Met |
---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Lifting with Hoist Rings
More
Hoist Rings—For Lifting




Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel offers mild corrosion resistance.
Nickel-coated steel is more corrosion resistant than black-oxide steel.
17-4 PH stainless steel is more corrosion resistant than steel.
316 stainless steel provides the most corrosion resistance.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | ||||||||
---|---|---|---|---|---|---|---|---|
1/4"-20 | 1/2" | 13/16" | 3 1/4" | 600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1/4"-20 | 9/16" | 1 1/4" | 3 7/8" | 550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/16"-18 | 5/16" | 13/16" | 3" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
5/16"-18 | 9/16" | 1 1/4" | 3 7/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/16"-18 | 1 1/16" | 1 1/4" | 4 3/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/8"-16 | 9/16" | 1 1/4" | 3 7/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/8"-16 | 1 1/16" | 1 1/4" | 4 3/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 3/4" | 1 3/4" | 7 3/4" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 3/4" | 2" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 3/4" | 2" | 7 5/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 1" | 1 3/4" | 7 3/4" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1" | 2" | 6 3/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 1" | 2" | 7 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 1 1/16" | 1 1/4" | 4 3/8" | 2,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 1 1/4" | 1 3/4" | 6 7/32" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1/2"-13 | 1 1/4" | 2" | 6 5/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 1 1/4" | 2" | 8 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 3/4" | 2" | 6 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 3/4" | 2" | 7 5/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 13/16" | 1 3/4" | 5 5/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 13/16" | 1 3/4" | 7 1/2" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 15/16" | 1 3/4" | 7 15/16" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1" | 1 3/4" | 5 31/32" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
5/8"-11 | 1" | 1 3/4" | 7 3/4" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1" | 2" | 6 3/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 1" | 2" | 7 7/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 1 1/4" | 1 3/4" | 6 7/32" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
5/8"-11 | 1 1/4" | 1 3/4" | 8 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1 1/4" | 2" | 6 5/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 1 1/4" | 2" | 8 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/4"-10 | 1" | 1 3/4" | 5 31/32" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
3/4"-10 | 1" | 2" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/4"-10 | 1" | 2" | 7 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1" | 3" | 8 3/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1" | 3" | 10" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 1/16" | 1 3/4" | 7 3/4" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/8" | 1 3/4" | 8 1/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/4" | 3" | 8 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/4" | 3" | 10 1/4" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 2" | 6 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/4"-10 | 1 1/2" | 2" | 8 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 3" | 8 7/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 9/16" | 1 3/4" | 8 1/4" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 9/16" | 2 3/4" | 9 3/4" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
7/8"-9 | 1" | 3" | 8 3/8" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
7/8"-9 | 1" | 3" | 10" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
7/8"-9 | 1 1/4" | 3" | 8 5/8" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
7/8"-9 | 1 1/4" | 3" | 10 1/4" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/4" | 3" | 8 5/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/4" | 3" | 10 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 5/16" | 2 3/4" | 7 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 5/16" | 2 3/4" | 9 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 2 3/4" | 10" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 3" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 3" | 10 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 9/16" | 2 3/4" | 9 3/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 1/4" | 3" | 9 5/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 1/4" | 3" | 11 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1"-8 | 2 5/16" | 2 3/4" | 10 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1 1/4"-7 | 1 7/8" | 3 1/2" | 11 1/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/4"-7 | 1 7/8" | 4" | 11 1/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/4"-7 | 1 15/16" | 3 1/2" | 10 5/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/4"-7 | 2 5/8" | 4" | 11 7/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 3/8"-6 | 2 5/8" | 4" | 11 7/8" | 20,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/2"-6 | 2 5/8" | 4" | 11 7/8" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
2"-4 1/2 | 3" | 4" | 12 1/4" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
2"-8 | 3" | 4" | 12 1/4" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Machined Black-Oxide Steel | ||||||||
5/16"-18 | 9/16" | 13/16" | 3 1/4" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/8"-16 | 9/16" | 13/16" | 3 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 3/4" | 1 3/4" | 5 5/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 13/16" | 1 3/4" | 7 1/2" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1/2"-13 | 1" | 1 3/4" | 5 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1 5/16" | 1 3/4" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
5/8"-11 | 1 1/16" | 1 3/4" | 5 7/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
5/8"-11 | 1 5/16" | 1 3/4" | 6 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 1/16" | 1 3/4" | 5 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 1/16" | 2 3/4" | 7 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 5/16" | 1 3/4" | 6 1/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 5/16" | 1 3/4" | 8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 9/16" | 1 3/4" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
3/4"-10 | 1 9/16" | 2 3/4" | 8 1/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
7/8"-9 | 1 1/16" | 2 3/4" | 7 5/8" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 9/16" | 2 3/4" | 8 1/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1 1/8"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1 1/4"-8 | 1 15/16" | 3 1/2" | 10 5/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1 1/2"-6 | 2 3/4" | 4 1/2" | 15 1/4" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/2"-8 | 2 3/4" | 4 1/2" | 15 1/4" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
2"-4 1/2 | 3" | 4 1/2" | 15 1/2" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
2"-8 | 3" | 4 1/2" | 15 1/2" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
2 1/2"-4 | 4" | 6" | 20 7/8" | 50,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000000 |
2 1/2"-8 | 4" | 6" | 20 7/8" | 50,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000000 |
Forged Nickel-Coated Steel | ||||||||
1/4"-20 | 1/2" | 15/16" | 3 1/4" | 600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
1/2"-13 | 1 1/4" | 1 3/4" | 8 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
5/8"-11 | 1 1/4" | 1 3/4" | 8 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Machined Nickel-Coated Steel | ||||||||
5/16"-18 | 9/16" | 13/16" | 3 1/4" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/8"-16 | 9/16" | 13/16" | 3 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 3/4" | 1 3/4" | 5 5/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 3/4" | 1 3/4" | 7 1/2" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1" | 1 3/4" | 5 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1 1/16" | 1 3/8" | 4 7/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1 1/4" | 1 3/4" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1" | 1 3/4" | 5 7/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1" | 1 3/4" | 7 3/4" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1 1/4" | 1 3/4" | 6 1/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1" | 1 3/4" | 5 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1" | 2 3/4" | 7 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 1 3/4" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 1 3/4" | 8 1/4" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 2 3/4" | 8 1/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
7/8"-9 | 1" | 2 3/4" | 7 5/8" | 8,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/4" | 2 3/4" | 7 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 2 3/4" | 8 1/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 1/4" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Nickel-Coated Steel | ||||||||
5/16"-18 | 9/16" | 1 1/4" | 3 7/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/8"-16 | 9/16" | 1 1/4" | 3 7/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 3/4" | 2" | 6 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1" | 2" | 6 3/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1" | 2" | 6 3/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/4" | 3" | 8 5/8" | 7,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 3" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/4"-7 | 1 7/8" | 4" | 11 1/8" | 15,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1 1/2"-6 | 2 5/8" | 4" | 11 7/8" | 24,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
2"-4 1/2 | 3" | 4" | 12 1/4" | 30,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged Steel | ||||||||
5/16"-18 | 1/2" | 1 1/2" | 4 1/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
3/8"-16 | 9/16" | 1 1/2" | 4 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
1/2"-13 | 11/16" | 3" | 7 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
5/8"-11 | 15/16" | 3" | 7 3/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/8" | 3" | 7 1/2" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 1 1/2" | 3 5/8" | 11 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged 17-4 PH Stainless Steel | ||||||||
5/16"-18 | 1/2" | 1 1/2" | 4 1/8" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/8"-16 | 9/16" | 1 1/2" | 4 1/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 11/16" | 3" | 7 1/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1" | 3" | 7 3/8" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1 1/4" | 3" | 7 5/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/8" | 3" | 7 1/2" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined 316 Stainless Steel | ||||||||
1/4"-20 | 9/16" | 15/16" | 3 1/4" | 300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/16"-18 | 5/16" | 15/16" | 3" | 400 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/16"-18 | 9/16" | 15/16" | 3 1/4" | 400 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/8"-16 | 9/16" | 15/16" | 3 1/4" | 500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 13/16" | 1 7/8" | 5 3/4" | 1,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1" | 1 7/8" | 5 31/32" | 1,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1 1/16" | 1 7/16" | 4 7/8" | 1,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1/2"-13 | 1 5/16" | 1 7/8" | 6 1/4" | 1,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1 1/16" | 1 7/8" | 6" | 2,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
5/8"-11 | 1 5/16" | 1 7/8" | 6 1/4" | 2,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 1/16" | 1 7/8" | 6" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
3/4"-10 | 1 9/16" | 1 7/8" | 6 1/2" | 2,500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
7/8"-9 | 1 1/16" | 2 7/8" | 7 5/8" | 4,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
1"-8 | 2 5/16" | 2 7/8" | 8 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M8 | 1.25 | 16 | 33 | 98 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M8 | 1.25 | 21 | 33 | 103 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
M10 | 1.5 | 16 | 33 | 98 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
M10 | 1.5 | 26 | 33 | 108 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
M12 | 1.75 | 25 | 50 | 160 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 25 | 50 | 200 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 32 | 50 | 167 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M12 | 1.75 | 32 | 50 | 207 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M14 | 2 | 25 | 50 | 161 | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M14 | 2 | 25 | 50 | 200 | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M14 | 2 | 32 | 50 | 168 | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M14 | 2 | 32 | 50 | 207 | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M16 | 2 | 25 | 50 | 160 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 25 | 50 | 200 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 32 | 50 | 167 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M16 | 2 | 32 | 50 | 207 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 25 | 50 | 160 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 25 | 50 | 200 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 28 | 71 | 216 | 6,600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 28 | 71 | 257 | 6,600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 38 | 50 | 173 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M20 | 2.5 | 38 | 50 | 213 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 28 | 71 | 216 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 28 | 71 | 257 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 38 | 71 | 226 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 38 | 71 | 267 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M30 | 3.5 | 38 | 71 | 226 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 38 | 71 | 267 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 48 | 71 | 236 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M30 | 3.5 | 48 | 71 | 277 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 67 | 101 | 302 | 15,425 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M36 | 4 | 67 | 101 | 302 | 24,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined Black-Oxide Steel | |||||||||
M8 | 1.25 | 17 | 21 | 85 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
M10 | 1.5 | 18 | 21 | 86 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M12 | 1.75 | 19 | 44 | 142 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M12 | 1.75 | 19 | 44 | 190 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M16 | 2 | 24 | 44 | 146 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M16 | 2 | 24 | 44 | 195 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 29 | 71 | 195 | 6,600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 29 | 71 | 236 | 6,600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 30 | 44 | 152 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M20 | 2.5 | 30 | 44 | 201 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 34 | 71 | 200 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M24 | 3 | 34 | 71 | 241 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 46 | 89 | 268 | 15,425 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 54 | 71 | 220 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 54 | 71 | 261 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M30 | 3.5 | 66 | 89 | 288 | 15,425 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M42 | 4.5 | 79 | 114 | 396 | 27,550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
M48 | 5 | 79 | 114 | 396 | 29,750 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Forged Nickel-Coated Steel | |||||||||
M16 | 2 | 24 | 46 | 149 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Machined Nickel-Coated Steel | |||||||||
M8 | 1.25 | 13 | 21 | 81 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M10 | 1.5 | 18 | 21 | 86 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 19 | 44 | 142 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 29 | 44 | 152 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M20 | 2.5 | 34 | 44 | 157 | 4,725 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 37 | 71 | 200 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Nickel-Coated Steel | |||||||||
M8 | 1.25 | 16 | 33 | 98 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M10 | 1.5 | 16 | 33 | 98 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 25 | 50 | 160 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M14 | 2 | 25 | 50 | 161 | 3,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 25 | 50 | 160 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M20 | 2.5 | 25 | 50 | 160 | 4,850 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 28 | 71 | 216 | 9,250 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M30 | 3.5 | 38 | 71 | 226 | 9,900 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged 17-4 PH Stainless Steel | |||||||||
M8 | 1.25 | 12 | 38 | 103 | 875 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M10 | 1.5 | 15 | 38 | 106 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 18 | 76 | 179 | 2,300 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 24 | 76 | 185 | 4,175 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined 316 Stainless Steel | |||||||||
M8 | 1.25 | 13 | 22 | 81 | 425 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M10 | 1.5 | 18 | 22 | 86 | 550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M12 | 1.75 | 19 | 44 | 140 | 1,150 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M16 | 2 | 29 | 44 | 150 | 2,075 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M20 | 2.5 | 34 | 44 | 155 | 2,350 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
M24 | 3 | 37 | 72 | 203 | 4,600 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Side-Mount Hoist Rings—For Lifting
Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.





Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Each | |
Steel | |||||||
---|---|---|---|---|---|---|---|
5/16"-18 | 1/2" | 1 3/4" | 4" | 650 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
3/8"-16 | 9/16" | 1 3/4" | 4" | 800 | 180° Pivot and 360° Swivel | 00000000 | 00000 |
1/2"-13 | 3/4" | 2" | 6 1/2" | 1,800 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
5/8"-11 | 15/16" | 2" | 6 1/2" | 2,500 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
3/4"-10 | 1 1/8" | 2" | 6 1/2" | 4,100 | 180° Pivot and 360° Swivel | 00000000 | 000000 |





Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Each | |
Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M8 | 1.25 | 16 | 45 | 101 | 700 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
M10 | 1.5 | 20 | 45 | 101 | 1,100 | 180° Pivot and 360° Swivel | 00000000 | 00000 |
M12 | 1.75 | 24 | 51 | 165 | 1,575 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
M16 | 2 | 32 | 51 | 165 | 3,075 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
M20 | 2.5 | 40 | 51 | 165 | 5,025 | 180° Pivot and 360° Swivel | 00000000 | 000000 |
Wrench-Tighten Hoist Rings—For Lifting
![]() | ![]() 180° Pivot | |
![]() 360° Swivel | ![]() 30° Lift Angle |
No need for a torque wrench—install these hoist rings using an adjustable wrench. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Each | |
Steel | |||||||
---|---|---|---|---|---|---|---|
5/16"-18 | 1/2" | 1 1/8" | 4 7/16" | 800 | 180° Pivot and 360° Swivel | 0000000 | 0000000 |
3/8"-16 | 1/2" | 1 1/8" | 4 7/16" | 1,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
1/2"-13 | 3/4" | 1 3/8" | 6 5/8" | 2,500 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
5/8"-11 | 1" | 1 3/8" | 6 7/8" | 4,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
3/4"-10 | 1 1/4" | 1 1/2" | 8 5/16" | 5,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
Shackle Hoist Rings—For Lifting




Remove the shackle after lifting while keeping the base installed for future use. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Each | |
Black-Oxide Steel Base with Zinc-Plated Steel Eye | |||||||
---|---|---|---|---|---|---|---|
1/2"-13 | 1" | 1 1/2" | 5 3/16" | 2,500 | 180° Pivot and 360° Swivel | 0000000 | 0000000 |
5/8"-11 | 1" | 1 1/2" | 5 3/16" | 4,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
3/4"-10 | 1 1/2" | 1 7/8" | 7 1/16" | 5,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
7/8"-9 | 1 1/4" | 2 5/8" | 8 1/2" | 8,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
1"-8 | 1 1/2" | 2 5/8" | 8 3/4" | 10,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
1 1/4"-7 | 1 7/8" | 2 3/4" | 10 1/8" | 15,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |
1 1/2"-6 | 2 1/4" | 3 3/4" | 14" | 24,000 | 180° Pivot and 360° Swivel | 0000000 | 000000 |