Swivel Leveling Mounts | McMaster-Carr

Filter by

Mount Movement

System of Measurement

Thread Size

Base Material

Mount Type

Base Diameter

Overall Height

Capacity per Mount

Stud Material

Base Shape

Cushion Material

Hex Nut Material

Thread Type

Base Finish

Swivel Range of Motion

Thread Length

RoHS Compliance

DFARS Compliance

Hex Nut Width

REACH Compliance

Minimum Temperature

Maximum Temperature

Hex Nut Finish

Forward

How can we improve?

1,099 Products

Mount Type

Threaded Stud

Install in either threaded holes or unthreaded through holes

849 products

Threaded Hole

Add your own stud to create a custom mount

229 products

Mount Type

Bracket

Attach to machines that don't have feet

19 products

Weld On

Create a permanent connection

2 products

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Plastic Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Nickel-Plated Steel Base and Stud


		10-32	1"	7.5°	3/4"	700 lb.	1 1/2"	0000000	00000	525 lb.	1 5/8"	00000000	00000
		10-32	2"	7.5°	3/4"	700 lb.	2 1/2"	0000000	0000	525 lb.	2 5/8"	00000000	0000
		1/4"-20	1 1/4"	7.5°	1"	1,000 lb.	1 15/16"	0000000	0000	750 lb.	2 1/16"	00000000	0000
		1/4"-20	2 1/2"	7.5°	1"	1,000 lb.	3 3/16"	0000000	0000	750 lb.	3 5/16"	00000000	0000
		1/4"-28	1 1/4"	7.5°	1"	775 lb.	1 15/16"	00000000	0000	580 lb.	2 1/16"	00000000	0000
		5/16"-18	2"	7.5°	1 1/4"	2,500 lb.	2 7/8"	0000000	0000	1,875 lb.	3"	00000000	0000
		5/16"-18	4"	7.5°	1 1/4"	2,500 lb.	4 7/8"	0000000	0000	1,875 lb.	5"	00000000	0000
		3/8"-16	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	0000000	0000	2,800 lb.	3"	00000000	0000
		3/8"-16	4"	7.5°	1 1/4"	3,750 lb.	4 7/8"	0000000	0000	2,800 lb.	5"	00000000	00000
		3/8"-24	2"	7.5°	1 1/4"	3,300 lb.	2 7/8"	00000000	0000	2,475 lb.	3"	00000000	00000
		1/2"-13	2"	7.5°	1 7/8"	5,000 lb.	3 1/8"	0000000	00000	3,750 lb.	3 1/4"	00000000	00000
		1/2"-13	4"	7.5°	1 7/8"	5,000 lb.	5 1/8"	0000000	00000	3,750 lb.	5 1/4"	00000000	00000
		1/2"-13	6"	7.5°	1 7/8"	5,000 lb.	7 1/8"	00000000	00000	3,750 lb.	7 1/4"	00000000	00000
		1/2"-20	2"	7.5°	1 7/8"	4,000 lb.	3 1/8"	00000000	00000	3,000 lb.	3 1/4"	00000000	00000
		5/8"-11	2"	7.5°	2 1/2"	6,000 lb.	3 1/4"	0000000	00000	4,500 lb.	3 3/8"	00000000	00000
		5/8"-11	4"	7.5°	2 1/2"	6,000 lb.	5 1/4"	0000000	00000	4,500 lb.	5 3/8"	00000000	00000
		5/8"-11	6"	7.5°	2 1/2"	6,000 lb.	7 1/4"	00000000	00000	4,500 lb.	7 3/8"	00000000	00000
		5/8"-18	2"	7.5°	2 1/2"	5,000 lb.	3 1/4"	00000000	00000	3,750 lb.	3 3/8"	00000000	00000
		3/4"-10	2"	7.5°	3"	7,400 lb.	3 1/2"	0000000	00000	5,550 lb.	3 5/8"	00000000	00000
		3/4"-10	4"	7.5°	3"	7,400 lb.	5 1/2"	0000000	00000	5,550 lb.	5 5/8"	00000000	00000
		3/4"-10	6"	7.5°	3"	7,400 lb.	7 1/2"	00000000	00000	5,550 lb.	7 5/8"	00000000	00000
		3/4"-16	2"	7.5°	3"	6,200 lb.	3 1/2"	00000000	00000	4,650 lb.	3 5/8"	00000000	00000
		7/8"-9	4"	7.5°	4"	15,000 lb.	5 7/8"	00000000	00000	11,250 lb.	6"	00000000	00000
		7/8"-14	4"	7.5°	4"	13,500 lb.	5 7/8"	00000000	00000	10,100 lb.	6"	00000000	00000
		1"-8	3 1/2"	7.5°	4"	20,000 lb.	5 3/8"	0000000	00000	15,000 lb.	5 1/2"	00000000	00000
		1"-8	4 1/4"	7.5°	4"	20,000 lb.	6 1/8"	00000000	00000	15,000 lb.	6 1/4"	00000000	00000
		1"-8	6"	7.5°	4"	20,000 lb.	7 7/8"	0000000	00000	15,000 lb.	8"	00000000	00000
		1"-8	8"	7.5°	4"	20,000 lb.	9 7/8"	0000000	00000	15,000 lb.	10"	00000000	00000
		1"-12	3 1/2"	7.5°	4"	18,000 lb.	5 3/8"	00000000	00000	13,500 lb.	5 1/2"	00000000	00000
		1 1/4"-7	4"	7.5°	6"	43,000 lb.	6 3/4"	00000000	000000	32,250 lb.	6 7/8"	00000000	000000
		1 1/4"-7	6"	7.5°	6"	43,000 lb.	8 3/4"	00000000	000000	32,250 lb.	8 7/8"	00000000	000000
		M6 × 1 mm	25 mm	7.5°	19 mm	690 lb.	38 mm	00000000	0000	510 lb.	41 mm	00000000	0000
		M8 × 1.25 mm	32 mm	7.5°	25 mm	990 lb.	49 mm	00000000	0000	740 lb.	52 mm	00000000	0000
		M10 × 1.5 mm	51 mm	7.5°	32 mm	3,700 lb.	73 mm	00000000	0000	2,700 lb.	76 mm	00000000	0000
		M12 × 1.75 mm	51 mm	7.5°	48 mm	4,950 lb.	79 mm	00000000	00000	3,700 lb.	83 mm	00000000	00000
		M16 × 2 mm	51 mm	7.5°	64 mm	5,950 lb.	83 mm	00000000	00000	4,500 lb.	86 mm	00000000	00000
		M20 × 2.5 mm	51 mm	7.5°	76 mm	7,350 lb.	89 mm	00000000	00000	5,500 lb.	92 mm	00000000	00000
		M24 × 3 mm	89 mm	7.5°	102 mm	19,500 lb.	137 mm	00000000	00000	14,500 lb.	140 mm	00000000	00000
		M24 × 3 mm	108 mm	7.5°	102 mm	19,500 lb.	156 mm	00000000	00000	14,500 lb.	159 mm	00000000	00000
		M30 × 3.5 mm	102 mm	7.5°	152 mm	42,500 lb.	172 mm	00000000	000000	32,250 lb.	175 mm	00000000	000000
		M30 × 3.5 mm	152 mm	7.5°	152 mm	42,500 lb.	222 mm	00000000	000000	32,250 lb.	225 mm	00000000	000000

		Zinc Yellow-Chromate-Plated Steel Base and Stud


				10-32	1"	7.5°	3/4"	700 lb.	1 1/2"	0000000	0000	525 lb.	1 5/8"	0000000	0000
				10-32	2"	7.5°	3/4"	700 lb.	2 1/2"	0000000	0000	525 lb.	2 5/8"	00000000	0000
				1/4"-20	1 1/4"	7.5°	1"	1,000 lb.	1 15/16"	0000000	0000	750 lb.	2 1/16"	0000000	0000
				1/4"-20	2 1/2"	7.5°	1"	1,000 lb.	3 3/16"	0000000	0000	750 lb.	3 5/16"	00000000	0000
				1/4"-28	1 1/4"	7.5°	1"	775 lb.	1 15/16"	00000000	0000	580 lb.	2 1/16"	00000000	0000
				5/16"-18	2"	7.5°	1 1/4"	2,500 lb.	2 7/8"	0000000	0000	1,875 lb.	3"	00000000	0000
				5/16"-18	4"	7.5°	1 1/4"	2,500 lb.	4 7/8"	0000000	0000	1,875 lb.	5"	00000000	0000
				3/8"-16	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	0000000	0000	2,800 lb.	3"	0000000	0000
				3/8"-16	4"	7.5°	1 1/4"	3,750 lb.	4 7/8"	0000000	0000	2,800 lb.	5"	00000000	00000
				3/8"-24	2"	7.5°	1 1/4"	3,300 lb.	2 7/8"	00000000	00000	2,475 lb.	3"	00000000	00000
				1/2"-13	2"	7.5°	1 7/8"	5,000 lb.	3 1/8"	0000000	00000	3,750 lb.	3 1/4"	0000000	00000
				1/2"-13	4"	7.5°	1 7/8"	5,000 lb.	5 1/8"	0000000	00000	3,750 lb.	5 1/4"	00000000	00000
				1/2"-13	6"	7.5°	1 7/8"	5,000 lb.	7 1/8"	00000000	00000	3,750 lb.	7 1/4"	00000000	00000
				1/2"-20	2"	7.5°	1 7/8"	4,000 lb.	3 1/8"	00000000	00000	3,000 lb.	3 1/4"	00000000	00000
				5/8"-11	2"	7.5°	2 1/2"	6,000 lb.	3 1/4"	0000000	00000	4,500 lb.	3 3/8"	0000000	00000
				5/8"-11	4"	7.5°	2 1/2"	6,000 lb.	5 1/4"	0000000	00000	4,500 lb.	5 3/8"	00000000	00000
				5/8"-11	6"	7.5°	2 1/2"	6,000 lb.	7 1/4"	00000000	00000	4,500 lb.	7 3/8"	00000000	00000
5/8"-18				2"	7.5°	2 1/2"	5,000 lb.	3 1/4"	00000000	00000	3,750 lb.	3 3/8"	00000000	00000
3/4"-10	2"			7.5°	3"	7,400 lb.	3 1/2"	0000000	00000	5,550 lb.	3 5/8"	0000000	00000
3/4"-10	4"			7.5°	3"	7,400 lb.	5 1/2"	0000000	00000	5,550 lb.	5 5/8"	00000000	00000
3/4"-10	6"			7.5°	3"	7,400 lb.	7 1/2"	00000000	00000	5,550 lb.	7 5/8"	00000000	00000
3/4"-16	2"			7.5°	3"	6,200 lb.	3 1/2"	00000000	00000	4,650 lb.	3 5/8"	00000000	00000
7/8"-9	4"			7.5°	4"	15,000 lb.	5 7/8"	00000000	00000	11,250 lb.	6"	00000000	00000
7/8"-14	4"			7.5°	4"	13,500 lb.	5 7/8"	00000000	00000	__	__	__	00
1"-8	3 1/2"			7.5°	4"	20,000 lb.	5 3/8"	0000000	00000	15,000 lb.	5 1/2"	0000000	00000
1"-8	6"			7.5°	4"	20,000 lb.	7 7/8"	0000000	00000	15,000 lb.	8"	00000000	00000
1"-8	8"			7.5°	4"	20,000 lb.	9 7/8"	0000000	00000	15,000 lb.	10"	00000000	00000
1"-12	3 1/2"			7.5°	4"	18,000 lb.	5 3/8"	00000000	00000	__	__	__	00
1 1/4"-7	4"			7.5°	6"	43,000 lb.	6 3/4"	00000000	000000	32,250 lb.	6 7/8"	00000000	000000
1 1/4"-7	6"			7.5°	6"	43,000 lb.	8 3/4"	00000000	000000	__	__	__	00
M6 × 1 mm	25 mm			7.5°	19 mm	690 lb.	38 mm	0000000	0000	515 lb.	41 mm	0000000	0000
M8 × 1.25 mm	32 mm			7.5°	25 mm	990 lb.	49 mm	0000000	0000	750 lb.	52 mm	0000000	0000
M10 × 1.5 mm	51 mm			7.5°	32 mm	3,740 lb.	73 mm	0000000	0000	2,795 lb.	76 mm	0000000	0000
M12 × 1.75 mm	51 mm			7.5°	48 mm	4,950 lb.	79 mm	0000000	00000	3,740 lb.	83 mm	0000000	00000
M16 × 2 mm	51 mm			7.5°	64 mm	5,940 lb.	83 mm	0000000	00000	4,500 lb.	86 mm	0000000	00000
M20 × 2.5 mm	51 mm			7.5°	76 mm	7,370 lb.	89 mm	0000000	00000	5,545 lb.	92 mm	0000000	00000
M24 × 3 mm	89 mm			7.5°	102 mm	19,840 lb.	137 mm	0000000	00000	14,990 lb.	140 mm	0000000	00000
M24 × 3 mm	108 mm			7.5°	102 mm	19,840 lb.	156 mm	0000000	00000	14,990 lb.	159 mm	0000000	00000
M30 × 3.5 mm	102 mm			7.5°	152 mm	42,990 lb.	172 mm	0000000	000000	32,295 lb.	175 mm	0000000	000000
M30 × 3.5 mm	152 mm			7.5°	152 mm	42,990 lb.	222 mm	0000000	000000	32,295 lb.	225 mm	0000000	000000

Black-Oxide Steel Base and Zinc-Plated Steel Stud


				10-32	1"	7.5°	3/4"	700 lb.	1 1/2"	00000000	0000	525 lb.	1 5/8"	00000000	0000
				10-32	2"	7.5°	3/4"	700 lb.	2 1/2"	00000000	0000	525 lb.	2 5/8"	00000000	0000
				1/4"-20	1 1/4"	7.5°	1"	1,000 lb.	1 15/16"	00000000	0000	750 lb.	2 1/16"	00000000	0000
				1/4"-20	2 1/2"	7.5°	1"	1,000 lb.	3 3/16"	00000000	0000	750 lb.	3 5/16"	00000000	00000
				1/4"-28	1 1/4"	7.5°	1"	775 lb.	1 15/16"	00000000	0000	__	__	__	00
				5/16"-18	2"	7.5°	1 1/4"	2,500 lb.	2 7/8"	00000000	0000	1,875 lb.	3"	00000000	00000
				5/16"-18	4"	7.5°	1 1/4"	2,500 lb.	4 7/8"	00000000	00000	1,875 lb.	5"	00000000	00000
				3/8"-16	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	00000000	00000	2,800 lb.	3"	00000000	00000
				3/8"-16	4"	7.5°	1 1/4"	3,750 lb.	4 7/8"	00000000	00000	2,800 lb.	5"	00000000	00000
				3/8"-24	2"	7.5°	1 1/4"	3,300 lb.	2 7/8"	00000000	00000	2,475 lb.	3"	00000000	00000
				1/2"-13	2"	7.5°	1 7/8"	5,000 lb.	3 1/8"	00000000	00000	3,750 lb.	3 1/4"	00000000	00000
				1/2"-13	4"	7.5°	1 7/8"	5,000 lb.	5 1/8"	00000000	00000	3,750 lb.	5 1/4"	00000000	00000
				1/2"-13	6"	7.5°	1 7/8"	5,000 lb.	7 1/8"	00000000	00000	3,750 lb.	7 1/4"	00000000	00000
				1/2"-20	2"	7.5°	1 7/8"	4,000 lb.	3 1/8"	00000000	00000	3,000 lb.	3 1/4"	00000000	00000
				5/8"-11	2"	7.5°	2 1/2"	6,000 lb.	3 1/4"	00000000	00000	4,500 lb.	3 3/8"	00000000	00000
				5/8"-11	4"	7.5°	2 1/2"	6,000 lb.	5 1/4"	00000000	00000	4,500 lb.	5 3/8"	00000000	00000
				5/8"-11	6"	7.5°	2 1/2"	6,000 lb.	7 1/4"	00000000	00000	4,500 lb.	7 3/8"	00000000	00000
				5/8"-18	2"	7.5°	2 1/2"	5,000 lb.	3 1/4"	00000000	00000	3,750 lb.	3 3/8"	00000000	00000
				3/4"-10	2"	7.5°	3"	7,400 lb.	3 1/2"	00000000	00000	5,550 lb.	3 5/8"	00000000	00000
		3/4"-10		4"	7.5°	3"	7,400 lb.	5 1/2"	00000000	00000	5,550 lb.	5 5/8"	00000000	00000
		3/4"-10	6"	7.5°	3"	7,400 lb.	7 1/2"	00000000	00000	5,550 lb.	7 5/8"	00000000	00000
		3/4"-16	2"	7.5°	3"	6,200 lb.	3 1/2"	00000000	00000	__	__	__	00
		7/8"-9	4"	7.5°	4"	15,000 lb.	5 7/8"	00000000	00000	11,250 lb.	6"	00000000	00000
		7/8"-14	4"	7.5°	4"	13,500 lb.	5 7/8"	00000000	00000	__	__	__	00
		1"-8	3 1/2"	7.5°	4"	20,000 lb.	5 3/8"	00000000	00000	15,000 lb.	5 1/2"	00000000	00000
		1"-8	6"	7.5°	4"	20,000 lb.	7 7/8"	00000000	00000	15,000 lb.	8"	00000000	00000
		1"-8	8"	7.5°	4"	20,000 lb.	9 7/8"	00000000	00000	15,000 lb.	10"	00000000	00000
		1"-12	3 1/2"	7.5°	4"	18,000 lb.	5 3/8"	00000000	00000	__	__	__	00
		1 1/4"-7	4"	7.5°	6"	43,000 lb.	6 3/4"	00000000	000000	32,250 lb.	6 7/8"	00000000	000000
		1 1/4"-7	6"	7.5°	6"	43,000 lb.	8 3/4"	00000000	000000	__	__	__	00

		303 Stainless Steel Base and Stud


				10-32	1"	7.5°	3/4"	700 lb.	1 1/2"	0000000	00000	525 lb.	1 5/8"	0000000	00000
				10-32	2"	7.5°	3/4"	700 lb.	2 1/2"	0000000	00000	525 lb.	2 5/8"	0000000	00000
				1/4"-20	1 1/4"	7.5°	1"	1,000 lb.	1 15/16"	0000000	00000	750 lb.	2 1/16"	0000000	00000
				1/4"-20	2 1/2"	7.5°	1"	1,000 lb.	3 3/16"	0000000	00000	750 lb.	3 5/16"	0000000	00000
				1/4"-28	1 1/4"	7.5°	1"	775 lb.	1 15/16"	00000000	00000	580 lb.	2 1/16"	0000000	00000
				5/16"-18	2"	7.5°	1 1/4"	2,500 lb.	2 7/8"	0000000	00000	1,875 lb.	3"	0000000	00000
				5/16"-18	4"	7.5°	1 1/4"	2,500 lb.	4 7/8"	0000000	00000	1,875 lb.	5"	0000000	00000
				3/8"-16	13/16"	5°	1 1/4"	440 lb.	1 7/16"	00000000	00000	85 lb.	1 7/16"	00000000	00000
				3/8"-16	13/16"	5°	1 9/16"	700 lb.	1 7/16"	00000000	00000	175 lb.	1 7/16"	00000000	00000
				3/8"-16	13/16"	5°	2"	790 lb.	1 1/2"	00000000	00000	220 lb.	1 1/2"	00000000	00000
				3/8"-16	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	0000000	00000	2,800 lb.	3"	0000000	00000
				3/8"-16	4"	7.5°	1 1/4"	3,750 lb.	4 7/8"	0000000	00000	2,800 lb.	5"	0000000	00000
				3/8"-24	2"	7.5°	1 1/4"	3,300 lb.	2 7/8"	00000000	00000	2,475 lb.	3"	0000000	00000
				1/2"-13	2"	7.5°	1 7/8"	5,000 lb.	3 1/8"	0000000	00000	3,750 lb.	3 1/4"	0000000	00000
				1/2"-13	4"	7.5°	1 7/8"	5,000 lb.	5 1/8"	0000000	00000	3,750 lb.	5 1/4"	0000000	00000
				1/2"-13	6"	7.5°	1 7/8"	5,000 lb.	7 1/8"	00000000	00000	__	__	__	00
				1/2"-20	2"	7.5°	1 7/8"	4,000 lb.	3 1/8"	00000000	00000	3,000 lb.	3 1/4"	0000000	00000
				5/8"-11	2"	7.5°	2 1/2"	6,000 lb.	3 1/4"	0000000	00000	4,500 lb.	3 3/8"	0000000	00000
				5/8"-11	4"	7.5°	2 1/2"	6,000 lb.	5 1/4"	0000000	00000	4,500 lb.	5 3/8"	0000000	00000
				5/8"-11	6"	7.5°	2 1/2"	6,000 lb.	7 1/4"	00000000	00000	__	__	__	00
				5/8"-18	2"	7.5°	2 1/2"	5,000 lb.	3 1/4"	00000000	00000	3,750 lb.	3 3/8"	0000000	00000
				3/4"-10	2"	7.5°	3"	7,400 lb.	3 1/2"	0000000	00000	5,550 lb.	3 5/8"	0000000	00000
				3/4"-10	4"	7.5°	3"	7,400 lb.	5 1/2"	0000000	00000	5,550 lb.	5 5/8"	0000000	000000
				3/4"-10	6"	7.5°	3"	7,400 lb.	7 1/2"	00000000	00000	__	__	__	00
				3/4"-16	2"	7.5°	3"	6,200 lb.	3 1/2"	00000000	00000	4,650 lb.	3 5/8"	0000000	00000
				7/8"-9	4"	7.5°	4"	15,000 lb.	5 7/8"	00000000	000000	11,250 lb.	6"	0000000	000000
				7/8"-14	4"	7.5°	4"	13,500 lb.	5 7/8"	00000000	000000	10,100 lb.	6"	0000000	000000
				1"-8	3 1/2"	7.5°	4"	20,000 lb.	5 3/8"	0000000	00000	15,000 lb.	5 1/2"	0000000	000000
1"-8				4 1/4"	7.5°	4"	__	__	__	00	15,000 lb.	6 1/4"	0000000	000000
1"-8	4 1/2"			7.5°	4"	20,000 lb.	6 1/8"	00000000	000000	__	__	__	00
1"-8	6"			7.5°	4"	20,000 lb.	7 7/8"	0000000	000000	15,000 lb.	8"	0000000	000000
1"-8	8"			7.5°	4"	20,000 lb.	9 7/8"	0000000	000000	15,000 lb.	10"	0000000	000000
1"-12	3 1/2"			7.5°	4"	18,000 lb.	5 3/8"	00000000	000000	13,500 lb.	5 1/2"	0000000	000000
1 1/4"-7	4"			7.5°	6"	43,000 lb.	6 3/4"	00000000	000000	32,200 lb.	6 7/8"	0000000	000000
1 1/4"-7	6"			7.5°	6"	43,000 lb.	8 3/4"	00000000	000000	32,200 lb.	8 7/8"	0000000	000000
M6 × 1 mm	25 mm			7.5°	19 mm	690 lb.	38 mm	0000000	00000	510 lb.	41 mm	00000000	00000
M8 × 1.25 mm	32 mm			7.5°	25 mm	990 lb.	49 mm	0000000	00000	740 lb.	52 mm	00000000	00000
M10 × 1.5 mm	51 mm			7.5°	32 mm	3,740 lb.	73 mm	0000000	00000	2,790 lb.	76 mm	00000000	00000
M12 × 1.75 mm	51 mm			7.5°	48 mm	4,950 lb.	79 mm	0000000	00000	3,740 lb.	83 mm	00000000	00000
M16 × 2 mm	51 mm			7.5°	64 mm	5,940 lb.	83 mm	0000000	00000	4,500 lb.	86 mm	00000000	00000
M20 × 2.5 mm	51 mm			7.5°	76 mm	7,370 lb.	89 mm	0000000	00000	5,550 lb.	92 mm	00000000	000000
M24 × 3 mm	89 mm			7.5°	102 mm	19,800 lb.	137 mm	0000000	00000	14,900 lb.	140 mm	00000000	000000
M24 × 3 mm	108 mm			7.5°	102 mm	19,800 lb.	156 mm	0000000	000000	14,900 lb.	159 mm	00000000	000000
M30 × 3.5 mm	102 mm			7.5°	152 mm	42,000 lb.	172 mm	0000000	000000	32,200 lb.	175 mm	00000000	000000
M30 × 3.5 mm	152 mm			7.5°	152 mm	42,000 lb.	222 mm	0000000	000000	32,200 lb.	225 mm	00000000	000000

316 Stainless Steel Base and Stud


				10-32	1"	7.5°	3/4"	700 lb.	1 1/2"	00000000	00000	__	__	__	00
				10-32	2"	7.5°	3/4"	700 lb.	2 1/2"	00000000	00000	__	__	__	00
				1/4"-20	1 1/4"	7.5°	1"	1,000 lb.	1 15/16"	00000000	00000	__	__	__	00
				1/4"-20	2 1/2"	7.5°	1"	1,000 lb.	3 3/16"	00000000	00000	__	__	__	00
				5/16"-18	2"	7.5°	1 1/4"	2,500 lb.	2 7/8"	00000000	00000	__	__	__	00
				5/16"-18	4"	7.5°	1 1/4"	2,500 lb.	4 7/8"	00000000	00000	__	__	__	00
				3/8"-16	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	00000000	00000	__	__	__	00
				3/8"-16	4"	7.5°	1 1/4"	3,750 lb.	4 7/8"	00000000	00000	__	__	__	00
				1/2"-13	2"	7.5°	1 7/8"	5,000 lb.	3 1/8"	00000000	00000	__	__	__	00
				1/2"-13	4"	7.5°	1 7/8"	5,000 lb.	5 1/8"	00000000	00000	__	__	__	00
				1/2"-13	6"	7.5°	1 7/8"	5,000 lb.	7 1/8"	00000000	00000	__	__	__	00
				1/2"-20	2"	7.5°	1 7/8"	4,000 lb.	3 1/8"	00000000	00000	__	__	__	00
				5/8"-11	2"	7.5°	2 1/2"	6,000 lb.	3 1/4"	00000000	00000	__	__	__	00
				5/8"-11	4"	7.5°	2 1/2"	6,000 lb.	5 1/4"	00000000	00000	__	__	__	00
		5/8"-11		6"	7.5°	2 1/2"	6,000 lb.	7 1/4"	00000000	00000	__	__	__	00
		3/4"-10	2"	7.5°	3"	7,400 lb.	3 1/2"	00000000	000000	__	__	__	00
		3/4"-10	4"	7.5°	3"	7,400 lb.	5 1/2"	00000000	000000	__	__	__	00
		3/4"-10	6"	7.5°	3"	7,400 lb.	7 1/2"	00000000	000000	__	__	__	00
		1"-8	3 1/2"	7.5°	4"	20,000 lb.	5 3/8"	00000000	000000	__	__	__	00
		1"-8	6"	7.5°	4"	20,000 lb.	7 7/8"	00000000	000000	__	__	__	00
		1"-8	8"	7.5°	4"	20,000 lb.	9 7/8"	00000000	000000	__	__	__	00
		M6 × 1 mm	25 mm	7.5°	19 mm	690 lb.	38 mm	0000000	00000	__	__	__	00
		M8 × 1.25 mm	32 mm	7.5°	25 mm	990 lb.	49 mm	0000000	00000	__	__	__	00
		M10 × 1.5 mm	51 mm	7.5°	32 mm	3,740 lb.	73 mm	0000000	00000	__	__	__	00
		M12 × 1.75 mm	51 mm	7.5°	48 mm	4,950 lb.	79 mm	0000000	00000	__	__	__	00
		M16 × 2 mm	51 mm	7.5°	64 mm	5,940 lb.	83 mm	0000000	000000	__	__	__	00
		M20 × 2.5 mm	51 mm	7.5°	76 mm	7,370 lb.	89 mm	0000000	000000	__	__	__	00
		M24 × 3 mm	89 mm	7.5°	102 mm	19,800 lb.	137 mm	0000000	000000	__	__	__	00

		Plastic Base and Zinc-Plated Steel Stud


				10-32	1"	7.5°	3/4"	150 lb.	1 1/2"	0000000	0000	150 lb.	1 5/8"	00000000	0000
				10-32	2"	7.5°	3/4"	150 lb.	2 1/2"	00000000	0000	150 lb.	2 5/8"	00000000	0000
				1/4"-20	1 1/4"	7.5°	1"	200 lb.	1 15/16"	0000000	0000	200 lb.	2 1/16"	00000000	0000
				1/4"-20	2 1/2"	7.5°	1"	200 lb.	3 3/16"	00000000	0000	200 lb.	3 5/16"	00000000	0000
				1/4"-28	1 1/4"	7.5°	1"	200 lb.	1 15/16"	00000000	0000	__	__	__	00
				5/16"-18	2"	7.5°	1 1/4"	250 lb.	2 7/8"	00000000	0000	250 lb.	3"	00000000	0000
				5/16"-18	4"	7.5°	1 1/4"	250 lb.	4 7/8"	00000000	0000	250 lb.	5"	00000000	0000
				3/8"-16	2"	7.5°	1 1/4"	300 lb.	2 7/8"	0000000	0000	300 lb.	3"	00000000	0000
				3/8"-16	4"	7.5°	1 1/4"	300 lb.	4 7/8"	00000000	0000	300 lb.	5"	00000000	00000
				3/8"-24	2"	7.5°	1 1/4"	250 lb.	2 7/8"	00000000	0000	250 lb.	3"	00000000	00000
				1/2"-13	2"	7.5°	1 7/8"	700 lb.	3 1/8"	0000000	00000	700 lb.	3 1/4"	00000000	00000
				1/2"-13	4"	7.5°	1 7/8"	700 lb.	5 1/8"	00000000	00000	700 lb.	5 1/4"	00000000	00000
				1/2"-13	6"	7.5°	1 7/8"	700 lb.	7 1/8"	00000000	00000	700 lb.	7 1/4"	00000000	00000
				1/2"-20	2"	7.5°	1 7/8"	625 lb.	3 1/8"	00000000	00000	625 lb.	3 1/4"	00000000	00000
				5/8"-11	2"	7.5°	2 1/2"	1,200 lb.	3 1/4"	0000000	00000	1,200 lb.	3 3/8"	00000000	00000
				5/8"-11	4"	7.5°	2 1/2"	1,200 lb.	5 1/4"	00000000	00000	1,200 lb.	5 3/8"	00000000	00000
				5/8"-11	6"	7.5°	2 1/2"	1,200 lb.	7 1/4"	00000000	00000	1,200 lb.	7 3/8"	00000000	00000
				5/8"-18	2"	7.5°	2 1/2"	1,100 lb.	3 1/4"	00000000	00000	1,100 lb.	3 3/8"	00000000	00000
				3/4"-10	2"	7.5°	3"	1,800 lb.	3 1/2"	0000000	00000	1,800 lb.	3 5/8"	00000000	00000
				3/4"-10	4"	7.5°	3"	1,800 lb.	5 1/2"	00000000	00000	1,800 lb.	5 5/8"	00000000	00000
				3/4"-10	6"	7.5°	3"	1,800 lb.	7 1/2"	00000000	00000	1,800 lb.	7 5/8"	00000000	00000
				3/4"-16	2"	7.5°	3"	1,650 lb.	3 1/2"	00000000	00000	__	__	__	00
				7/8"-9	4"	7.5°	4"	1,700 lb.	5 7/8"	00000000	00000	1,700 lb.	6"	00000000	00000
				7/8"-14	4"	7.5°	4"	1,950 lb.	5 7/8"	00000000	00000	__	__	__	00
				1"-8	3 1/2"	7.5°	4"	2,400 lb.	5 3/8"	0000000	00000	2,400 lb.	5 1/2"	00000000	00000
				1"-8	6"	7.5°	4"	2,400 lb.	7 7/8"	00000000	00000	2,400 lb.	8"	00000000	00000
				1"-8	8"	7.5°	4"	2,400 lb.	9 7/8"	00000000	00000	2,400 lb.	10"	00000000	00000
				1"-12	3 1/2"	7.5°	4"	2,250 lb.	5 3/8"	00000000	00000	__	__	__	00
				1 1/4"-7	4"	7.5°	6"	3,600 lb.	6 3/4"	00000000	000000	3,600 lb.	6 7/8"	00000000	000000
				1 1/4"-7	6"	7.5°	6"	3,600 lb.	8 3/4"	00000000	000000	__	__	__	00

High-Capacity Swivel Leveling Mounts with Threaded Stud

Level heavier equipment than other similarly sized swivel mounts. In addition to supporting higher capacities, the broad Acme threads adjust with fewer turns of the stud or jam nut than other threads. These mounts have a ball-and-socket joint in the base that swivels to keep equipment level on slightly sloped and pitted floors. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

					Without Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each
Zinc-Plated Steel Base and Stud


		1/4"-16	1 1/4"	7.5°	1"	1,500 lb.	1 15/16"	0000000	000000
		5/16"-14	2"	7.5°	1 1/4"	3,750 lb.	2 7/8"	0000000	00000
		3/8"-12	2"	7.5°	1 1/4"	5,625 lb.	2 7/8"	0000000	00000
		1/2"-10	2"	7.5°	1 7/8"	7,500 lb.	3 1/8"	0000000	00000
		1/2"-10	4"	7.5°	1 7/8"	7,500 lb.	5 1/8"	0000000	00000
		5/8"-8	2"	7.5°	2 1/2"	9,000 lb.	3 1/4"	0000000	00000
		3/4"-6	2"	7.5°	3"	11,100 lb.	3 1/2"	0000000	00000
		1"-5	3 1/2"	7.5°	4"	30,000 lb.	5 3/8"	0000000	00000
		1"-5	6"	7.5°	4"	30,000 lb.	7 7/8"	0000000	00000
		1 1/4"-5	4"	7.5°	6"	60,000 lb.	6 3/4"	0000000	000000

Stay-Put Swivel Leveling Mounts with Threaded Stud

Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Two Mounting Holes

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

						Mounting Holes		Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud


		10-32	1"	7.5°	2"	No	1/4"	1 5/16"	700 lb.	2 1/8"	00000000	00000	700 lb.	2 3/16"	00000000	00000
		10-32	2"	7.5°	2"	No	1/4"	1 5/16"	700 lb.	3 1/8"	00000000	0000	700 lb.	3 3/16"	00000000	00000
		1/4"-20	1 1/4"	7.5°	2"	No	1/4"	1 5/16"	1,000 lb.	2 3/8"	00000000	0000	1,000 lb.	2 7/16"	00000000	00000
		1/4"-20	2 1/2"	7.5°	2"	No	1/4"	1 5/16"	1,000 lb.	3 5/8"	00000000	00000	1,000 lb.	3 11/16"	00000000	00000
		1/4"-28	1 1/4"	7.5°	2"	No	1/4"	1 5/16"	775 lb.	2 5/8"	00000000	0000	__	__	__	00
		5/16"-18	2"	7.5°	2"	No	1/4"	1 5/16"	2,500 lb.	3 1/8"	00000000	0000	2,500 lb.	3 1/8"	00000000	00000
		5/16"-18	4"	7.5°	2"	No	1/4"	1 5/16"	2,500 lb.	5 1/8"	00000000	00000	2,500 lb.	5 3/16"	00000000	00000
		3/8"-16	2"	7.5°	2"	No	1/4"	1 5/16"	3,750 lb.	3 1/8"	00000000	00000	3,750 lb.	3 3/16"	00000000	00000
		3/8"-16	3"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	4 1/8"	0000000	0000	5,000 lb.	4 3/16"	0000000	00000
		3/8"-16	4"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	5 1/8"	0000000	0000	4,000 lb.	5 3/16"	0000000	00000
		3/8"-16	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	0000	5,000 lb.	5 3/16"	0000000	00000
		3/8"-16	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	0000000	0000	4,000 lb.	7 3/16"	0000000	00000
		3/8"-16	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	0000000	00000	5,000 lb.	7 3/16"	0000000	00000
		3/8"-16	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		3/8"-24	2"	7.5°	2"	No	1/4"	1 5/16"	3,300 lb.	3 1/8"	00000000	00000	3,300 lb.	3 3/16"	00000000	00000
		1/2"-13	2"	7.5°	2"	No	1/4"	1 5/16"	__	__	__	00	4,000 lb.	3 3/16"	00000000	00000
		1/2"-13	3"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	4 5/16"	00000000	00000	5,000 lb.	4 3/8"	00000000	00000
		1/2"-13	4"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	5 1/8"	0000000	0000	4,000 lb.	5 3/16"	0000000	00000
		1/2"-13	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	0000	5,000 lb.	5 3/16"	0000000	00000
		1/2"-13	4"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	5 5/16"	00000000	00000	5,000 lb.	5 3/8"	00000000	00000
		1/2"-13	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	00000000	00000	4,000 lb.	7 3/16"	00000000	00000
		1/2"-13	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		1/2"-13	6"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	7 5/16"	00000000	00000	5,000 lb.	7 3/8"	00000000	00000
		1/2"-13	8"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	9 1/8"	00000000	00000	4,000 lb.	9 3/16"	00000000	00000
		1/2"-13	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		1/2"-13	8"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	9 5/16"	00000000	00000	5,000 lb.	9 3/8"	00000000	00000
		1/2"-20	2"	7.5°	2"	No	1/4"	1 5/16"	3,800 lb.	3 1/8"	00000000	0000	3,200 lb.	3 3/16"	00000000	00000
		5/8"-11	2"	7.5°	3"	No	11/32"	2 3/16"	4,000 lb.	3 1/8"	00000000	00000	__	__	__	00
		5/8"-11	3"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	4 1/8"	00000000	0000	4,000 lb.	4 3/16"	00000000	00000
		5/8"-11	3"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	4 1/8"	00000000	0000	5,000 lb.	4 3/16"	00000000	00000
		5/8"-11	3"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	4 5/16"	00000000	00000	6,000 lb.	4 3/8"	00000000	00000
		5/8"-11	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	0000	5,000 lb.	5 3/16"	0000000	00000
		5/8"-11	4"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	5 5/16"	00000000	00000	6,000 lb.	5 3/8"	00000000	00000
		5/8"-11	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	00000000	00000	4,000 lb.	7 3/16"	00000000	00000
		5/8"-11	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		5/8"-11	6"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	7 5/16"	0000000	00000	6,000 lb.	7 3/8"	0000000	00000
		5/8"-11	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		5/8"-11	8"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	9 5/16"	00000000	00000	6,000 lb.	9 3/8"	00000000	00000
		5/8"-11	10"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	12 1/4"	00000000	00000	10,000 lb.	12 9/16"	00000000	00000
		3/4"-10	2"	7.5°	3"	No	11/32"	2 3/16"	__	__	__	00	4,000 lb.	3 3/16"	00000000	00000
		3/4"-10	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	00000000	00000	5,000 lb.	5 3/16"	00000000	00000
		3/4"-10	4"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	5 5/16"	00000000	00000	7,500 lb.	5 3/8"	00000000	00000
		3/4"-10	4"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	6 1/4"	00000000	00000	10,000 lb.	6 9/16"	00000000	00000
		3/4"-10	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		3/4"-10	6"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	7 5/16"	0000000	00000	7,500 lb.	7 3/8"	0000000	00000
		3/4"-10	6"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	8 1/4"	0000000	00000	10,000 lb.	8 9/16"	0000000	00000
		3/4"-10	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		3/4"-10	8"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	9 5/16"	00000000	00000	7,500 lb.	9 3/8"	00000000	00000
		3/4"-10	8"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	10 1/4"	00000000	00000	10,000 lb.	10 9/16"	00000000	00000
		3/4"-10	10"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	12 1/4"	00000000	00000	10,000 lb.	12 9/16"	00000000	00000
		1"-8	6"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	8 1/4"	0000000	00000	10,000 lb.	8 9/16"	0000000	00000
		1"-8	8"	7.5°	4 3/8"	No	13/32"	2 31/32"	__	__	__	00	2,700 lb.	9 11/16"	00000000	00000
		M10 × 1.5 mm	76 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	105 mm	0000000	00000	4,000 lb.	106.6 mm	0000000	00000
		M10 × 1.5 mm	76 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	104 mm	00000000	00000	5,000 lb.	105.6 mm	00000000	00000
		M10 × 1.5 mm	102 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	130 mm	0000000	00000	4,000 lb.	131.6 mm	0000000	00000
		M10 × 1.5 mm	102 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	0000000	0000	5,000 lb.	131.6 mm	0000000	00000
		M10 × 1.5 mm	152 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	181 mm	00000000	00000	4,000 lb.	182.6 mm	00000000	00000
		M10 × 1.5 mm	152 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	181 mm	00000000	00000	__	__	__	00
		M10 × 1.5 mm	203 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	232 mm	00000000	00000	5,000 lb.	233.6 mm	00000000	00000
		M12 × 1.75 mm	76 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	105 mm	0000000	0000	4,000 lb.	106.6 mm	0000000	00000
		M12 × 1.75 mm	76 mm	7.5°	101.9 mm	No	12.5 mm	68.8 mm	5,000 lb.	109 mm	00000000	00000	__	__	__	00
		M12 × 1.75 mm	76 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	__	__	__	00	5,000 lb.	110.6 mm	00000000	00000
M12 × 1.75 mm		102 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	130 mm	0000000	00000	4,000 lb.	131.6 mm	0000000	00000
M12 × 1.75 mm	102 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	00000000	00000	5,000 lb.	131.6 mm	00000000	00000
M12 × 1.75 mm	102 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	5,000 lb.	135 mm	00000000	00000	5,000 lb.	136.6 mm	00000000	00000
M12 × 1.75 mm	152 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	181 mm	0000000	0000	4,000 lb.	182.6 mm	0000000	00000
M12 × 1.75 mm	152 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	181 mm	0000000	00000	__	__	__	00
M12 × 1.75 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	5,000 lb.	185 mm	0000000	00000	5,000 lb.	186.6 mm	0000000	00000
M12 × 1.75 mm	203 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	232 mm	00000000	00000	4,000 lb.	233.6 mm	00000000	00000
M12 × 1.75 mm	203 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	__	__	__	00	5,000 lb.	233.6 mm	00000000	00000
M12 × 1.75 mm	203 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	5,000 lb.	236 mm	00000000	00000	5,000 lb.	237.6 mm	00000000	00000
M16 × 2 mm	76 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	105 mm	00000000	00000	__	__	__	00
M16 × 2 mm	76 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	104 mm	00000000	00000	5,000 lb.	105.6 mm	00000000	00000
M16 × 2 mm	76 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	6,000 lb.	109 mm	00000000	00000	6,000 lb.	110.6 mm	00000000	00000
M16 × 2 mm	102 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	0000000	00000	5,000 lb.	131.6 mm	0000000	00000
M16 × 2 mm	102 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	6,000 lb.	135 mm	00000000	00000	6,000 lb.	136.6 mm	00000000	00000
M16 × 2 mm	152 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	181 mm	00000000	00000	4,000 lb.	182.6 mm	00000000	00000
M16 × 2 mm	152 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	181 mm	00000000	00000	5,000 lb.	182.6 mm	00000000	00000
M16 × 2 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	6,000 lb.	185 mm	0000000	00000	6,000 lb.	186.6 mm	0000000	00000
M16 × 2 mm	203 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	232 mm	00000000	00000	5,000 lb.	233.6 mm	00000000	00000
M16 × 2 mm	203 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	6,000 lb.	236 mm	00000000	00000	6,000 lb.	237.6 mm	00000000	00000
M16 × 2 mm	254 mm	7.5°	127 mm	No	12 mm	98 mm	10,000 lb.	311 mm	00000000	00000	10,000 lb.	312.6 mm	00000000	00000
M20 × 2.5 mm	102 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	0000000	00000	5,000 lb.	131.6 mm	00000000	00000
M20 × 2.5 mm	102 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	7,500 lb.	135 mm	0000000	00000	7,500 lb.	136.6 mm	00000000	00000
M20 × 2.5 mm	152 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	181 mm	00000000	00000	5,000 lb.	182.6 mm	00000000	00000
M20 × 2.5 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	7,500 lb.	185 mm	0000000	00000	7,500 lb.	186.6 mm	0000000	00000
M20 × 2.5 mm	152 mm	7.5°	127 mm	No	12 mm	98 mm	10,000 lb.	210 mm	0000000	00000	__	__	__	00
M20 × 2.5 mm	203 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	232 mm	00000000	00000	5,000 lb.	233.6 mm	00000000	00000
M20 × 2.5 mm	203 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	7,500 lb.	236 mm	00000000	00000	7,500 lb.	237.6 mm	00000000	00000
M20 × 2.5 mm	203 mm	7.5°	127 mm	No	12 mm	98 mm	10,000 lb.	260 mm	00000000	00000	__	__	__	00
M20 × 2.5 mm	254 mm	7.5°	127 mm	No	12 mm	98 mm	10,000 lb.	311 mm	00000000	00000	10,000 lb.	312.6 mm	000000	00000
M24 × 3 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	7,500 lb.	185 mm	0000000	00000	7,500 lb.	186.6 mm	0000000	00000
M24 × 3 mm	152 mm	7.5°	127 mm	No	12 mm	98 mm	10,000 lb.	210 mm	0000000	00000	10,000 lb.	211.6 mm	00000000	00000

Glass-Filled Nylon Base and 303 Stainless Steel Stud


		3/8"-16	3"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	4 1/8"	0000000	00000	5,000 lb.	4 3/16"	0000000	00000
		3/8"-16	4"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	5 1/8"	0000000	00000	4,000 lb.	5 3/16"	0000000	00000
		3/8"-16	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	00000	5,000 lb.	5 3/16"	0000000	00000
		3/8"-16	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	0000000	00000	4,000 lb.	7 3/16"	0000000	00000
		3/8"-16	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	0000000	00000	5,000 lb.	7 3/16"	0000000	00000
		3/8"-16	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		1/2"-13	3"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	4 5/16"	00000000	00000	5,000 lb.	4 3/8"	00000000	00000
		1/2"-13	4"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	5 1/8"	0000000	00000	4,000 lb.	5 3/16"	0000000	00000
		1/2"-13	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	00000	5,000 lb.	5 3/16"	0000000	00000
		1/2"-13	4"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	5 5/16"	00000000	00000	5,000 lb.	5 3/8"	00000000	00000
		1/2"-13	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	00000000	00000	4,000 lb.	7 3/16"	00000000	00000
		1/2"-13	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		1/2"-13	6"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	7 5/16"	00000000	00000	5,000 lb.	7 3/8"	00000000	00000
		1/2"-13	8"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	9 1/8"	00000000	00000	4,000 lb.	9 3/16"	00000000	00000
		1/2"-13	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		1/2"-13	8"	7.5°	4"	No	7/16"	2 11/16"	5,000 lb.	9 5/16"	00000000	00000	5,000 lb.	9 3/8"	00000000	00000
		5/8"-11	3"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	4 1/8"	00000000	00000	4,000 lb.	4 3/16"	00000000	00000
		5/8"-11	3"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	4 1/8"	00000000	00000	5,000 lb.	4 3/16"	00000000	00000
		5/8"-11	3"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	4 5/16"	00000000	00000	6,000 lb.	4 3/8"	00000000	00000
		5/8"-11	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	0000000	00000	5,000 lb.	5 3/16"	0000000	00000
		5/8"-11	4"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	5 5/16"	00000000	00000	6,000 lb.	5 3/8"	00000000	00000
		5/8"-11	6"	7.5°	2"	No	1/4"	1 5/16"	4,000 lb.	7 1/8"	00000000	00000	4,000 lb.	7 3/16"	00000000	00000
		5/8"-11	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		5/8"-11	6"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	7 5/16"	0000000	00000	6,000 lb.	7 3/8"	0000000	00000
		5/8"-11	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		5/8"-11	8"	7.5°	4"	No	7/16"	2 11/16"	6,000 lb.	9 5/16"	00000000	00000	6,000 lb.	9 3/8"	00000000	00000
		5/8"-11	10"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	12 1/4"	00000000	00000	10,000 lb.	12 9/16"	00000000	00000
		3/4"-10	4"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	5 1/8"	00000000	00000	5,000 lb.	5 3/16"	00000000	00000
		3/4"-10	4"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	5 5/16"	00000000	00000	7,500 lb.	5 3/8"	00000000	00000
		3/4"-10	4"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	6 1/4"	00000000	00000	10,000 lb.	6 9/16"	00000000	00000
		3/4"-10	6"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	7 1/8"	00000000	00000	5,000 lb.	7 3/16"	00000000	00000
		3/4"-10	6"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	7 5/16"	0000000	00000	7,500 lb.	7 3/8"	0000000	00000
		3/4"-10	6"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	8 1/4"	0000000	00000	10,000 lb.	8 9/16"	0000000	00000
		3/4"-10	8"	7.5°	3"	No	5/16"	2 3/16"	5,000 lb.	9 1/8"	00000000	00000	5,000 lb.	9 3/16"	00000000	00000
		3/4"-10	8"	7.5°	4"	No	7/16"	2 11/16"	7,500 lb.	9 5/16"	00000000	00000	7,500 lb.	9 3/8"	00000000	00000
		3/4"-10	8"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	10 1/4"	00000000	00000	10,000 lb.	10 9/16"	00000000	00000
		3/4"-10	10"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	12 1/4"	00000000	00000	10,000 lb.	12 9/16"	00000000	00000
		1"-8	6"	7.5°	5"	No	1/2"	3 7/8"	10,000 lb.	8 1/4"	0000000	00000	10,000 lb.	8 9/16"	0000000	00000
		M10 × 1.5 mm	76 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	104 mm	00000000	00000	__	__	__	00
		M10 × 1.5 mm	102 mm	7.5°	80 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	0000000	00000	5,000 lb.	131.6 mm	0000000	00000
		M12 × 1.75 mm	76 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	105 mm	0000000	00000	4,000 lb.	106.6 mm	0000000	00000
		M12 × 1.75 mm	102 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	00000000	00000	__	__	__	00
		M12 × 1.75 mm	102 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	5,000 lb.	135 mm	00000000	00000	__	__	__	00
		M12 × 1.75 mm	152 mm	7.5°	51 mm	No	6.4 mm	33.8 mm	4,000 lb.	181 mm	0000000	00000	4,000 lb.	182.6 mm	0000000	00000
		M12 × 1.75 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	5,000 lb.	185 mm	0000000	00000	5,000 lb.	186.6 mm	0000000	00000
		M16 × 2 mm	102 mm	7.5°	80 mm	No	8.9 mm	55.9 mm	5,000 lb.	130 mm	0000000	00000	5,000 lb.	131.6 mm	0000000	00000
		M16 × 2 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	6,000 lb.	185 mm	0000000	00000	6,000 lb.	186.6 mm	0000000	00000
		M16 × 2 mm	203 mm	7.5°	76 mm	No	8.9 mm	55.9 mm	__	__	__	00	5,000 lb.	233.6 mm	00000000	00000
		M16 × 2 mm	254 mm	7.5°	127 mm	No	12.7 mm	98.4 mm	10,000 lb.	311 mm	00000000	00000	__	__	__	00
		M20 × 2.5 mm	152 mm	7.5°	102 mm	No	11.9 mm	68.8 mm	7,500 lb.	185 mm	0000000	00000	7,500 lb.	186.6 mm	0000000	00000

One Offset Mounting Hole

The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Base				Without Cushion			With Rubber Cushion
	Thread Size	Thread Lg.	Cap. per Mount	Swivel Range of Motion	Lg.	Wd.	Mounting Fasteners Included	Mounting Hole Dia.	Overall Ht.		Each	Overall Ht.		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud


		1/2"-13	4"	5,000 lb.	7.5°	5 7/16"	4"	No	1/2"	5 5/16"	0000000	000000	5 1/2"	0000000	000000
		1/2"-13	6"	5,000 lb.	7.5°	5 7/16"	4"	No	1/2"	7 5/16"	0000000	00000	7 1/2"	0000000	00000
		1/2"-13	8"	5,000 lb.	7.5°	5 7/16"	4"	No	1/2"	9 5/16"	0000000	00000	9 1/2"	0000000	00000
		5/8"-11	4"	6,000 lb.	7.5°	5 7/16"	4"	No	1/2"	5 5/16"	0000000	00000	5 1/2"	0000000	00000
		5/8"-11	6"	6,000 lb.	7.5°	5 7/16"	4"	No	1/2"	7 5/16"	0000000	00000	7 1/2"	0000000	00000
		5/8"-11	8"	6,000 lb.	7.5°	5 7/16"	4"	No	1/2"	9 5/16"	0000000	00000	9 1/2"	0000000	00000
		3/4"-10	4"	7,500 lb.	7.5°	5 7/16"	4"	No	1/2"	5 5/16"	0000000	00000	5 1/2"	0000000	00000
		3/4"-10	6"	7,500 lb.	7.5°	5 7/16"	4"	No	1/2"	7 5/16"	0000000	00000	7 1/2"	0000000	00000
		3/4"-10	8"	7,500 lb.	7.5°	5 7/16"	4"	No	1/2"	9 5/16"	0000000	00000	9 1/2"	0000000	00000
		1"-8	6"	7,500 lb.	7.5°	5 7/16"	4"	No	1/2"	7 5/16"	0000000	00000	7 1/2"	0000000	00000

		Glass-Filled Nylon Base and 303 Stainless Steel Stud


				1/2"-13	4"	5,000 lb.	7.5°	5 7/16"	4"	No	9/16"	5 5/16"	0000000	00000	5 1/2"	0000000	00000
				1/2"-13	8"	5,000 lb.	7.5°	5 7/16"	4"	No	9/16"	9 5/16"	0000000	00000	9 1/2"	0000000	00000
				5/8"-11	4"	6,000 lb.	7.5°	5 7/16"	4"	No	9/16"	5 5/16"	0000000	00000	5 1/2"	0000000	00000
				5/8"-11	8"	6,000 lb.	7.5°	5 7/16"	4"	No	9/16"	9 5/16"	0000000	00000	9 1/2"	0000000	00000
				3/4"-10	4"	7,500 lb.	7.5°	5 7/16"	4"	No	9/16"	5 5/16"	0000000	00000	5 1/2"	0000000	00000

Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud

Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Three Mounting Holes

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

			Cap. per Mount					Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Load	Pull	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Specs. Met	Overall Ht.		Each
304 Stainless Steel Base and Stud


		M30 × 3.5 mm	7 1/8"	13,480 lb.	6,290 lb.	10°	5 7/8"	No	17/32"	4 3/32"	NZS 4219	11 3/8"	00000000	0000000
		M36 × 4 mm	7 1/8"	21,580 lb.	6,290 lb.	10°	5 7/8"	No	17/32"	4 3/32"	NZS 4219	11 3/8"	00000000	000000
		M42 × 4.5 mm	7 5/16"	31,470 lb.	6,290 lb.	10°	5 7/8"	No	17/32"	4 3/32"	NZS 4219	11 3/4"	00000000	000000
		M48 × 5 mm	9 1/8"	31,470 lb.	6,290 lb.	10°	5 7/8"	No	17/32"	4 3/32"	NZS 4219	13 1/2"	00000000	000000

Four Mounting Holes

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

			Cap. per Mount					Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Load	Pull	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Specs. Met	Overall Ht.		Each
304 Stainless Steel Base and Stud


		M30 × 3.5 mm	7 1/8"	13,480 lb.	8,540 lb.	10°	7 7/8"	No	5/8"	4 15/32"	NZS 4219	11 3/8"	00000000	0000000
		M36 × 4 mm	7 1/8"	21,580 lb.	8,540 lb.	10°	7 7/8"	No	5/8"	4 15/32"	NZS 4219	11 3/8"	00000000	000000
		M42 × 4.5 mm	7 5/16"	31,470 lb.	8,540 lb.	10°	7 7/8"	No	5/8"	4 15/32"	NZS 4219	11 3/4"	00000000	000000
		M48 × 5 mm	9 1/8"	31,470 lb.	8,540 lb.	10°	7 7/8"	No	5/8"	4 15/32"	NZS 4219	13 1/2"	00000000	00000000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—In addition to reducing vibration, the cushion protects floors from scrapes and gouges and cuts down on noise. It also grips surfaces so vibrating equipment doesn’t slide.

						With Rubber Cushion
	Thread Size	Thread Lg.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each
Zinc Yellow-Chromate-Plated Steel Base and Stud


		1/4"-20	1 1/4"	0.05"	7.5°	1 1/4"	150 lb.	2 11/16"	0000000	000000
		1/4"-20	1 1/4"	0.05"	7.5°	1 1/4"	750 lb.	2 11/16"	0000000	00000
		5/16"-18	2"	0.05"	7.5°	1 1/4"	200 lb.	3 1/2"	0000000	00000
		5/16"-18	2"	0.05"	7.5°	1 1/4"	900 lb.	3 1/2"	0000000	00000
		3/8"-16	2"	0.05"	7.5°	1 1/4"	200 lb.	3 1/2"	0000000	00000
		3/8"-16	2"	0.05"	7.5°	1 1/4"	995 lb.	3 1/2"	0000000	00000
		1/2"-13	2"	0.04"	7.5°	1 7/8"	1,000 lb.	3 3/4"	0000000	00000
		1/2"-13	2"	0.06"	7.5°	1 7/8"	2,400 lb.	3 3/4"	0000000	00000
		5/8"-11	2"	0.05"	7.5°	2 1/2"	1,800 lb.	3 7/8"	0000000	00000
		5/8"-11	2"	0.06"	7.5°	2 1/2"	4,400 lb.	3 7/8"	0000000	00000
		3/4"-10	2"	0.06"	7.5°	3"	2,500 lb.	4 1/8"	0000000	00000
		3/4"-10	2"	0.08"	7.5°	3"	6,500 lb.	4 1/8"	0000000	00000
		1"-8	3 1/2"	0.06"	7.5°	4"	4,500 lb.	6"	0000000	00000
		1"-8	3 1/2"	0.08"	7.5°	4"	11,800 lb.	6"	0000000	00000
		1 1/4"-7	4"	0.06"	7.5°	6"	10,000 lb.	6 7/8"	0000000	00000
		1 1/4"-7	4"	0.08"	7.5°	6"	27,100 lb.	6 7/8"	0000000	000000

		304 Stainless Steel Base and Stud


				1/4"-20	4"	0.05"	7.5°	1 1/4"	300 lb.	5 1/2"	0000000	00000
				1/4"-20	6"	0.05"	7.5°	1 1/4"	300 lb.	7 1/2"	0000000	00000
				5/16"-18	4"	0.05"	7.5°	1 1/4"	400 lb.	5 1/2"	0000000	00000
				5/16"-18	6"	0.05"	7.5°	1 1/4"	400 lb.	7 1/2"	0000000	00000
				3/8"-16	4"	0.05"	7.5°	1 1/4"	500 lb.	5 1/2"	0000000	00000
				3/8"-16	6"	0.05"	7.5°	1 1/4"	500 lb.	7 1/2"	0000000	00000
				1/2"-13	2"	0.07"	7.5°	2 5/8"	500 lb.	2 15/16"	00000000	00000
				1/2"-13	4"	0.07"	7.5°	2 5/8"	500 lb.	4 15/16"	0000000	00000
				1/2"-13	4"	0.12"	7.5°	3 13/16"	1,000 lb.	5 3/8"	0000000	00000
				1/2"-13	4"	0.12"	7.5°	3 13/16"	2,000 lb.	5 3/8"	0000000	00000
				1/2"-13	4"	0.17"	7.5°	5 1/2"	3,000 lb.	5 15/16"	0000000	00000
				1/2"-13	4"	0.17"	7.5°	5 1/2"	4,000 lb.	5 15/16"	0000000	000000
				1/2"-13	6"	0.07"	7.5°	2 5/8"	500 lb.	6 15/16"	0000000	00000
				1/2"-13	6"	0.12"	7.5°	3 13/16"	1,000 lb.	7 3/8"	0000000	00000
				1/2"-13	6"	0.12"	7.5°	3 13/16"	2,000 lb.	7 3/8"	0000000	00000
				1/2"-13	6"	0.17"	7.5°	5 1/2"	3,000 lb.	7 15/16"	0000000	00000
				1/2"-13	6"	0.17"	7.5°	5 1/2"	4,000 lb.	7 15/16"	00000000	000000
				5/8"-11	4"	0.07"	7.5°	2 5/8"	500 lb.	5"	0000000	00000
				5/8"-11	4"	0.12"	7.5°	3 13/16"	1,000 lb.	5 7/16"	0000000	00000
				5/8"-11	4"	0.12"	7.5°	3 7/8"	2,000 lb.	5 7/16"	0000000	00000
				5/8"-11	4"	0.17"	7.5°	5 1/2"	3,000 lb.	6"	0000000	00000
				5/8"-11	4"	0.17"	7.5°	5 1/2"	4,000 lb.	6"	0000000	000000
				5/8"-11	6"	0.07"	7.5°	2 5/8"	500 lb.	7"	0000000	00000
				5/8"-11	6"	0.12"	7.5°	3 13/16"	1,000 lb.	7 7/16"	0000000	00000
				5/8"-11	6"	0.12"	7.5°	3 7/8"	2,000 lb.	7 7/16"	0000000	00000
				5/8"-11	6"	0.17"	7.5°	5 1/2"	3,000 lb.	8"	00000000	000000
				5/8"-11	6"	0.17"	7.5°	5 1/2"	4,000 lb.	8"	0000000	000000
				5/8"-11	8"	0.12"	7.5°	3 7/8"	1,000 lb.	9 7/16"	00000000	00000
				5/8"-11	8"	0.12"	7.5°	3 7/8"	2,000 lb.	9 7/16"	00000000	00000
				5/8"-11	10"	0.12"	7.5°	3 7/8"	1,000 lb.	11 7/16"	00000000	000000
				5/8"-11	10"	0.12"	7.5°	3 7/8"	2,000 lb.	11 7/16"	00000000	000000
				3/4"-10	4"	0.12"	7.5°	3 7/8"	1,000 lb.	5 9/16"	0000000	00000
				3/4"-10	4"	0.12"	7.5°	3 7/8"	2,000 lb.	5 9/16"	0000000	00000
				3/4"-10	4"	0.17"	7.5°	5 1/2"	3,000 lb.	6 1/8"	0000000	000000
				3/4"-10	4"	0.17"	7.5°	5 1/2"	4,000 lb.	6 1/8"	0000000	000000
				3/4"-10	6"	0.12"	7.5°	3 7/8"	1,000 lb.	7 9/16"	0000000	00000
				3/4"-10	6"	0.12"	7.5°	3 7/8"	2,000 lb.	7 9/16"	0000000	00000
				3/4"-10	6"	0.17"	7.5°	5 1/2"	3,000 lb.	8 1/8"	0000000	000000
				3/4"-10	6"	0.17"	7.5°	5 1/2"	4,000 lb.	8 1/8"	0000000	000000
				3/4"-10	8"	0.12"	7.5°	3 7/8"	1,000 lb.	9 9/16"	00000000	00000
				3/4"-10	8"	0.12"	7.5°	3 7/8"	2,000 lb.	9 9/16"	00000000	00000
				3/4"-10	8"	0.17"	7.5°	5 1/2"	3,000 lb.	10 1/8"	0000000	000000
3/4"-10				8"	0.17"	7.5°	5 1/2"	4,000 lb.	10 1/8"	00000000	000000
3/4"-10	10"			0.12"	7.5°	3 7/8"	1,000 lb.	11 9/16"	00000000	000000
3/4"-10	10"			0.12"	7.5°	3 7/8"	2,000 lb.	11 9/16"	00000000	000000
3/4"-10	10"			0.17"	7.5°	5 1/2"	3,000 lb.	12 1/8"	00000000	000000
3/4"-10	10"			0.17"	7.5°	5 1/2"	4,000 lb.	12 1/8"	00000000	000000
M12 × 1.75 mm	4 3/4"			0.07"	7.5°	2 5/8"	500 lb.	5 11/16"	0000000	00000
M12 × 1.75 mm	4 3/4"			0.12"	7.5°	3 7/8"	1,000 lb.	6 1/8"	0000000	00000
M12 × 1.75 mm	4 3/4"			0.12"	7.5°	3 7/8"	2,000 lb.	6 1/8"	0000000	00000
M16 × 2 mm	4 3/4"			0.07"	7.5°	2 5/8"	500 lb.	5 11/16"	0000000	00000
M16 × 2 mm	4 3/4"			0.12"	7.5°	3 7/8"	1,000 lb.	6 1/8"	0000000	00000
M16 × 2 mm	4 3/4"			0.12"	7.5°	3 7/8"	2,000 lb.	6 1/8"	0000000	00000
M16 × 2 mm	4 3/4"			0.17"	7.5°	5 1/2"	3,000 lb.	6 3/4"	00000000	000000
M16 × 2 mm	4 3/4"			0.17"	7.5°	5 1/2"	4,000 lb.	6 3/4"	00000000	000000
M20 × 2.5 mm	4 3/4"			0.12"	7.5°	3 7/8"	1,000 lb.	5 11/16"	0000000	00000
M20 × 2.5 mm	4 3/4"			0.12"	7.5°	3 7/8"	2,000 lb.	6 5/16"	0000000	00000
M20 × 2.5 mm	4 3/4"			0.17"	7.5°	5 1/2"	3,000 lb.	6 7/8"	00000000	000000
M20 × 2.5 mm	4 3/4"			0.17"	7.5°	5 1/2"	4,000 lb.	6 9/16"	0000000	000000
M24 × 3 mm	4 3/4"			0.17"	7.5°	5 1/2"	3,000 lb.	7"	00000000	000000
M24 × 3 mm	5 15/16"			0.12"	7.5°	3 7/8"	2,000 lb.	7 5/8"	00000000	000000
M24 × 3 mm	5 15/16"			0.17"	7.5°	5 1/2"	4,000 lb.	8 1/8"	00000000	000000

Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud

Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more holes for securing equipment that you don’t need to move. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

One Offset Mounting Hole

Image of Product. Front orientation. Leveling Mounts. Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole.

The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.

Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.

								With Rubber Cushion
	Thread Size	Thread Lg.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Mounting Hole Dia.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		1/2"-13	4"	0.01"	5°	2 15/16"	No	5/8"	1,770 lb.	4 7/8"	0000000	000000
		1/2"-13	4"	0.06"	5°	3 15/16"	No	5/8"	2,220 lb.	5 1/4"	0000000	00000
		5/8"-11	4"	0.01"	5°	2 15/16"	No	5/8"	1,770 lb.	4 7/8"	0000000	00000
		5/8"-11	4"	0.06"	5°	3 15/16"	No	5/8"	2,220 lb.	5 1/4"	0000000	00000
		5/8"-11	6"	0.01"	5°	2 15/16"	No	5/8"	1,770 lb.	6 7/8"	0000000	00000
		5/8"-11	6"	0.06"	5°	3 15/16"	No	5/8"	2,220 lb.	7 1/4"	0000000	00000
		3/4"-10	6"	0.01"	5°	2 15/16"	No	5/8"	1,770 lb.	6 7/8"	0000000	00000
		3/4"-10	6"	0.06"	5°	3 15/16"	No	5/8"	2,220 lb.	7 1/4"	0000000	00000
		M12 × 1.75 mm	3 15/16"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	4 13/16"	00000000	00000
		M16 × 2 mm	3 15/16"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	4 13/16"	00000000	00000
		M16 × 2 mm	5 15/16"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	6 13/16"	00000000	00000
		M20 × 2.5 mm	5 15/16"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	6 13/16"	00000000	00000

Two Offset Mounting Holes

Image of Product. Front orientation. Leveling Mounts. Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud, Two Offset Mounting Holes.

The mounting holes extend out from underneath your machine to give you more room to drill and install fasteners.

Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.

								With Rubber Cushion
	Thread Size	Thread Lg.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Mounting Hole Dia.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		1/2"-13	4"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	4 7/8"	00000000	000000
		5/8"-11	4"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	4 7/8"	00000000	00000
		5/8"-11	6"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	6 7/8"	00000000	00000
		3/4"-10	6"	0.06"	5°	2 15/16"	No	5/8"	1,770 lb.	6 7/8"	00000000	00000

Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—In addition to reducing vibration, the cushion protects floors from scrapes and gouges and cuts down on noise. It also grips surfaces so vibrating equipment doesn’t slide.

								With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Food Industry Std.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		5/8"-11	3 3/8"	4 1/8" to 5 1/2"	Not Rated	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000 lb.	7"	000000	000000
		5/8"-11	3 3/8"	4 3/8" to 5 11/16"	Not Rated	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	7 1/4"	000000	00000
		5/8"-11	3 3/8"	4 3/8" to 5 11/16"	Not Rated	10°	4 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	4,900 lb.	7 1/4"	0000000	00000
		5/8"-11	4 1/2"	5 5/16" to 7 7/8"	Not Rated	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000 lb.	9 3/8"	000000	00000
		5/8"-11	4 1/2"	5 1/2" to 8 1/16"	Not Rated	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	9 9/16"	000000	00000
		3/4"-10	3 3/8"	4 1/8" to 5 1/2"	Not Rated	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000 lb.	7"	000000	00000
		3/4"-10	3 3/8"	4 3/8" to 5 11/16"	Not Rated	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	7 1/4"	000000	00000
		3/4"-10	3 3/8"	4 3/8" to 5 11/16"	Not Rated	10°	4 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	4,900 lb.	7 1/4"	0000000	00000
		3/4"-10	4 1/2"	5 1/2" to 8 1/16"	Not Rated	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	9 9/16"	0000000	00000
		1"-8	3 3/8"	4 3/8" to 5 3/4"	Not Rated	10°	4 15/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	7,100 lb.	7 1/4"	0000000	000000
		M16 × 2 mm	5 7/8"	4 1/8" to 5 1/2"	Not Rated	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000 lb.	7"	0000000	00000
		M20 × 2.5 mm	8 1/4"	5 1/2" to 8 1/16"	Not Rated	10°	3 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	9 9/16"	0000000	00000

Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud

Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Two Mounting Holes

Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.

								Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Food Industry Std.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		5/8"-11	5 7/8"	4" to 5 3/8"	Not Rated	9°	3 1/8"	No	11/32"	2 1/4"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	6,800 lb.	6 7/8"	0000000	0000000
		5/8"-11	8 1/4"	5 3/16" to 7 3/4"	Not Rated	9°	3 1/8"	No	11/32"	2 1/4"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	5,400 lb.	9 1/4"	0000000	000000
		3/4"-10	5 7/8"	4" to 5 3/8"	Not Rated	9°	4 1/16"	No	1/2"	3 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	9,800 lb.	6 7/8"	0000000	000000
		3/4"-10	8 1/4"	5 3/16" to 7 3/4"	Not Rated	9°	4 1/16"	No	1/2"	3 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	9,800 lb.	9 1/4"	0000000	000000
		1"-8	5 7/8"	4" to 5 3/8"	Not Rated	9°	4 1/16"	No	1/2"	3 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	17,400 lb.	6 7/8"	0000000	000000
		1"-8	8 1/4"	5 3/16" to 7 3/4"	Not Rated	9°	4 1/16"	No	1/2"	3 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	17,400 lb.	9 1/4"	0000000	000000

One Offset Mounting Hole

The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.

Rubber Cushion—In addition to reducing vibration, the cushion also protects floors from scrapes and gouges and cuts down on noise.

										With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Mounting Hole Dia.	Food Industry Std.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		5/8"-11	5 7/8"	4 5/16" to 5 11/16"	Not Rated	10°	3 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	7 3/16"	0000000	000000
		5/8"-11	8 1/4"	5 1/2" to 8 1/16"	Not Rated	10°	3 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	9 9/16"	0000000	00000
		3/4"-10	5 7/8"	4 5/16" to 5 11/16"	Not Rated	10°	3 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	7 3/16"	0000000	00000
		3/4"-10	5 7/8"	4 5/16" to 5 11/16"	Not Rated	10°	4 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	4,900 lb.	7 3/16"	0000000	000000
		3/4"-10	8 1/4"	5 1/2" to 8 1/16"	Not Rated	10°	3 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	9 9/16"	0000000	00000
		3/4"-10	8 1/4"	5 1/2" to 8 1/16"	Not Rated	10°	4 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	4,900 lb.	9 9/16"	0000000	000000
		M16 × 2 mm	5 7/8"	4 1/8" to 5 1/2"	Not Rated	10°	2 9/16"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000 lb.	7"	0000000	00000
		M20 × 2.5 mm	5 7/8"	4 5/16" to 5 11/16"	Not Rated	10°	3 1/8"	No	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300 lb.	7 3/16"	0000000	000000

Easy-Install Vibration-Damping Swivel Leveling Mounts with Threaded Stud

A two-piece design requires less clearance to install than one-piece mounts. Raise your machine just enough to slide the base underneath, then insert the stud from above through a threaded or unthreaded hole. The stud rests in a divot in the base and swivels to keep equipment level on slightly sloped and pitted floors. Mounts also have a rubber cushion that reduces vibration to protect components and extend your machine’s life.

Iron Base—These mounts are best for dry environments since moisture will cause them to rust.

Rubber Cushion—In addition to reducing vibration, the cushion protects floors from scrapes and gouges and cuts down on noise. It also grips surfaces so vibrating equipment doesn’t slide.

						With Rubber Cushion
	Thread Size	Thread Lg.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each
Iron Base and Zinc-Plated Steel Stud


		5/16"-24	3 1/2"	0.04"	3.5°	2 1/2"	250 lb.	4 1/4"	0000000	000000
		1/2"-20	5 1/2"	0.04"	3.5°	3 1/2"	500 lb.	6 5/8"	0000000	00000
		1/2"-20	5 1/2"	0.04"	3.5°	3 1/2"	1,000 lb.	6 5/8"	0000000	00000
		3/4"-16	5 1/2"	0.04"	3.5°	7"	2,000 lb.	6 7/8"	0000000	000000
		3/4"-16	5 1/2"	0.04"	3.5°	7"	4,000 lb.	6 7/8"	0000000	000000
		3/4"-16	5 1/2"	0.06"	3.5°	7"	8,000 lb.	7"	0000000	000000
		3/4"-16	5 1/2"	0.06"	3.5°	7"	12,000 lb.	7"	0000000	000000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Often used on presses, lathes, and die cutters, these mounts protect machines and floors from damage when equipment suddenly starts and stops. They have a solid rubber base, similar to a hockey puck, that isolates shock. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Square Rubber Base and Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Square Base.

					Base
Thread Size	Thread Lg.	Cap. per Mount	Deflection @ Cap.	Swivel Range of Motion	Lg.	Wd.	Overall Ht.		Each
1/2"-13	2 7/16"	350 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	000000
1/2"-13	2 7/16"	700 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000
5/8"-11	2 1/2"	350 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000
5/8"-11	2 1/2"	700 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000
M12 × 1.75 mm	2 5/8"	350 lb.	0.13"	7.5°	3"	3"	3 7/16"	00000000	00000
M12 × 1.75 mm	2 5/8"	700 lb.	0.13"	7.5°	3"	3"	3 7/16"	00000000	00000
M16 × 2 mm	2 7/16"	350 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000
M16 × 2 mm	2 7/16"	700 lb.	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000

Round Rubber Base and Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.	Each
1/2"-13	2 7/16"	500 lb.	0.13"	7.5°	3"	3 5/16"	000000
1/2"-13	2 7/16"	1,000 lb.	0.13"	7.5°	3"	3 5/16"	00000
5/8"-11	2 1/2"	500 lb.	0.13"	7.5°	3"	3 1/2"	00000
5/8"-11	2 1/2"	1,000 lb.	0.13"	7.5°	3"	3 1/2"	00000
3/4"-10	3 7/8"	3,700 lb.	0.13"	7.5°	5"	5 3/4"	00000
3/4"-10	3 7/8"	8,000 lb.	0.13"	7.5°	5"	5 3/4"	00000
1"-8	4 1/4"	3,700 lb.	0.13"	7.5°	5"	5 7/8"	000000
1"-8	4 1/4"	8,000 lb.	0.13"	7.5°	5"	5 7/8"	000000
M12 × 1.75 mm	2 3/8"	500 lb.	0.13"	7.5°	3"	3 11/16"	00000
M12 × 1.75 mm	2 3/8"	1,000 lb.	0.13"	7.5°	3"	3 11/32"	00000
M16 × 2 mm	2 7/16"	500 lb.	0.13"	7.5°	3"	3 3/8"	00000
M16 × 2 mm	2 7/16"	1,000 lb.	0.13"	7.5°	3"	3 3/8"	00000
M20 × 2.5 mm	4 1/4"	3,700 lb.	0.13"	7.5°	5"	5 7/8"	000000
M20 × 2.5 mm	4 1/4"	8,000 lb.	0.13"	7.5°	5"	5 7/8"	000000
M24 × 3 mm	4 5/16"	3,700 lb.	0.13"	7.5°	5"	6"	000000
M24 × 3 mm	4 5/16"	8,000 lb.	0.13"	7.5°	5"	6"	000000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each	Cap. per Mount	Overall Ht.		Each
Nickel-Plated Steel Base


		10-32	3/16"	7.5°	3/4"	700 lb.	1/2"	0000000	00000	525 lb.	5/8"	00000000	00000
		1/4"-20	5/16"	7.5°	1"	1,000 lb.	11/16"	0000000	0000	750 lb.	13/16"	00000000	0000
		5/16"-18	3/8"	7.5°	1 1/4"	2,500 lb.	7/8"	0000000	0000	1,875 lb.	1"	00000000	0000
		5/16"-24	3/8"	7.5°	1 1/4"	__	__	__	00	1,600 lb.	1"	00000000	0000
		3/8"-16	3/8"	7.5°	1 1/4"	3,750 lb.	7/8"	0000000	0000	2,800 lb.	1"	00000000	0000
		3/8"-24	3/8"	7.5°	1 1/4"	__	__	__	00	2,475 lb.	1"	00000000	0000
		1/2"-13	7/16"	7.5°	1 7/8"	5,000 lb.	1 1/8"	0000000	0000	3,750 lb.	1 1/4"	00000000	0000
		1/2"-20	7/16"	7.5°	1 7/8"	4,000 lb.	1 1/8"	00000000	00000	3,000 lb.	1 1/4"	00000000	00000
		5/8"-11	7/16"	7.5°	2 1/2"	6,000 lb.	1 1/4"	0000000	00000	4,500 lb.	1 3/8"	00000000	00000
		5/8"-18	7/16"	7.5°	2 1/2"	5,000 lb.	1 1/4"	00000000	00000	3,750 lb.	1 3/8"	00000000	00000
		3/4"-10	11/16"	7.5°	3"	7,400 lb.	1 1/2"	0000000	00000	5,550 lb.	1 5/8"	00000000	00000
		3/4"-16	11/16"	7.5°	3"	6,200 lb.	1 1/2"	00000000	00000	4,650 lb.	1 5/8"	00000000	00000
		1"-8	13/16"	7.5°	4"	20,000 lb.	1 7/8"	0000000	00000	15,000 lb.	2"	00000000	00000
		1"-12	13/16"	7.5°	4"	18,000 lb.	1 7/8"	00000000	00000	13,500 lb.	2"	00000000	00000
		1 1/4"-7	1 1/8"	7.5°	6"	43,000 lb.	2 3/4"	00000000	00000	32,250 lb.	2 7/8"	00000000	00000

		Zinc Yellow-Chromate-Plated Steel Base


				10-32	3/16"	7.5°	3/4"	700 lb.	1/2"	0000000	0000	525 lb.	5/8"	0000000	0000
				1/4"-20	5/16"	7.5°	1"	1,000 lb.	11/16"	0000000	0000	750 lb.	13/16"	0000000	0000
				1/4"-28	5/16"	7.5°	1"	__	__	__	00	580 lb.	13/16"	00000000	0000
				5/16"-18	3/8"	7.5°	1 1/4"	2,500 lb.	7/8"	0000000	0000	1,875 lb.	1"	0000000	0000
				5/16"-24	3/8"	7.5°	1 1/4"	__	__	__	00	1,600 lb.	1"	00000000	0000
				3/8"-16	3/8"	7.5°	1 1/4"	3,750 lb.	7/8"	0000000	0000	2,800 lb.	1"	0000000	0000
				3/8"-24	3/8"	7.5°	1 1/4"	3,300 lb.	7/8"	00000000	0000	2,475 lb.	1"	00000000	0000
				1/2"-13	7/16"	7.5°	1 7/8"	5,000 lb.	1 1/8"	0000000	0000	3,750 lb.	1 1/4"	0000000	0000
				1/2"-20	7/16"	7.5°	1 7/8"	4,000 lb.	1 1/8"	00000000	00000	3,000 lb.	1 1/4"	00000000	00000
				5/8"-11	7/16"	7.5°	2 1/2"	6,000 lb.	1 1/4"	0000000	00000	4,500 lb.	1 3/8"	0000000	00000
				5/8"-18	7/16"	7.5°	2 1/2"	5,000 lb.	1 1/4"	00000000	00000	3,750 lb.	1 3/8"	00000000	00000
				3/4"-10	11/16"	7.5°	3"	7,400 lb.	1 1/2"	0000000	00000	5,550 lb.	1 5/8"	0000000	00000
				3/4"-16	11/16"	7.5°	3"	6,200 lb.	1 1/2"	00000000	00000	4,650 lb.	1 5/8"	00000000	00000
				7/8"-9	13/16"	7.5°	4"	15,000 lb.	1 7/8"	00000000	00000	__	__	__	00
				1"-8	13/16"	7.5°	4"	20,000 lb.	1 7/8"	0000000	00000	15,000 lb.	2"	0000000	00000
				1"-12	13/16"	7.5°	4"	18,000 lb.	1 7/8"	00000000	00000	13,500 lb.	2"	00000000	00000
				1 1/4"-7	1 1/8"	7.5°	6"	43,000 lb.	2 3/4"	00000000	00000	32,250 lb.	2 7/8"	00000000	00000
				M6 × 1 mm	4 mm	7.5°	19 mm	690 lb.	13 mm	0000000	0000	515 lb.	16 mm	0000000	0000
				M8 × 1.25 mm	7.7 mm	7.5°	25 mm	990 lb.	17 mm	0000000	0000	750 lb.	20 mm	0000000	0000
				M10 × 1.5 mm	9.4 mm	7.5°	32 mm	3,740 lb.	22 mm	0000000	0000	2,795 lb.	25 mm	0000000	0000
				M12 × 1.75 mm	11 mm	7.5°	48 mm	4,950 lb.	29 mm	0000000	00000	3,740 lb.	32 mm	0000000	00000
				M16 × 2 mm	11 mm	7.5°	64 mm	5,940 lb.	32 mm	0000000	00000	4,500 lb.	35 mm	0000000	00000
				M20 × 2.5 mm	13.7 mm	7.5°	76 mm	7,370 lb.	38 mm	0000000	00000	5,545 lb.	41 mm	0000000	00000
				M24 × 3 mm	17.5 mm	7.5°	102 mm	19,800 lb.	48 mm	0000000	00000	14,960 lb.	51 mm	0000000	00000

				Black-Oxide Steel Base


						10-32	3/16"	7.5°	3/4"	700 lb.	1/2"	00000000	0000	525 lb.	5/8"	00000000	0000
						1/4"-20	5/16"	7.5°	1"	1,000 lb.	11/16"	00000000	0000	750 lb.	13/16"	00000000	0000
						5/16"-18	3/8"	7.5°	1 1/4"	2,500 lb.	7/8"	00000000	0000	1,875 lb.	1"	00000000	0000
						3/8"-16	3/8"	7.5°	1 1/4"	3,750 lb.	7/8"	00000000	00000	2,800 lb.	1"	00000000	0000
						1/2"-13	7/16"	7.5°	1 7/8"	5,000 lb.	1 1/8"	00000000	00000	3,750 lb.	1 1/4"	00000000	00000
						1/2"-20	7/16"	7.5°	1 7/8"	4,000 lb.	1 1/8"	00000000	00000	3,000 lb.	1 1/4"	00000000	00000
						5/8"-11	7/16"	7.5°	2 1/2"	6,000 lb.	1 1/4"	00000000	00000	4,500 lb.	1 3/8"	00000000	00000
						5/8"-18	7/16"	7.5°	2 1/2"	5,000 lb.	1 1/4"	00000000	00000	3,750 lb.	1 3/8"	00000000	00000
						3/4"-10	11/16"	7.5°	3"	7,400 lb.	1 1/2"	00000000	00000	5,550 lb.	1 5/8"	00000000	00000
						3/4"-16	11/16"	7.5°	3"	6,200 lb.	1 1/2"	00000000	00000	4,650 lb.	1 5/8"	00000000	00000
						1"-8	13/16"	7.5°	4"	20,000 lb.	1 7/8"	00000000	00000	15,000 lb.	2"	00000000	00000
						1"-12	13/16"	7.5°	4"	18,000 lb.	1 7/8"	00000000	00000	13,500 lb.	2"	00000000	00000
						1 1/4"-7	1 1/8"	7.5°	6"	43,000 lb.	2 3/4"	00000000	00000	32,250 lb.	2 7/8"	00000000	00000

						303 Stainless Steel Base


						10-32	3/16"	7.5°	3/4"	700 lb.	1/2"	0000000	00000	525 lb.	5/8"	0000000	00000
						1/4"-20	5/16"	7.5°	1"	1,000 lb.	11/16"	0000000	00000	750 lb.	13/16"	0000000	00000
						1/4"-28	5/16"	7.5°	1"	775 lb.	11/16"	00000000	00000	550 lb.	13/16"	0000000	00000
						5/16"-18	3/8"	7.5°	1 1/4"	2,500 lb.	7/8"	0000000	00000	1,850 lb.	1"	0000000	00000
						5/16"-24	3/8"	7.5°	1 1/4"	2,150 lb.	7/8"	00000000	00000	__	__	__	00
						3/8"-16	3/8"	7.5°	1 1/4"	3,750 lb.	7/8"	0000000	00000	2,800 lb.	1"	0000000	00000
						3/8"-24	3/8"	7.5°	1 1/4"	3,300 lb.	7/8"	00000000	00000	__	__	__	00
						1/2"-13	7/16"	7.5°	1 7/8"	5,000 lb.	1 1/8"	0000000	00000	3,750 lb.	1 1/4"	0000000	00000
						1/2"-20	7/16"	7.5°	1 7/8"	4,000 lb.	1 1/8"	00000000	00000	3,000 lb.	1 1/4"	0000000	00000
						5/8"-11	7/16"	7.5°	2 1/2"	6,000 lb.	1 1/4"	0000000	00000	4,500 lb.	1 3/8"	0000000	00000
						5/8"-18	7/16"	7.5°	2 1/2"	5,000 lb.	1 1/4"	00000000	00000	3,750 lb.	1 3/8"	0000000	00000
						3/4"-10	5/8"	7.5°	3"	__	__	__	00	5,550 lb.	1 5/8"	0000000	00000
						3/4"-10	11/16"	7.5°	3"	7,400 lb.	1 1/2"	0000000	00000	__	__	__	00
						3/4"-16	5/8"	7.5°	3"	6,200 lb.	1 1/2"	00000000	00000	4,650 lb.	1 5/8"	0000000	00000
						7/8"-9	13/16"	7.5°	4"	15,000 lb.	1 7/8"	00000000	00000	__	__	__	00
						1"-8	13/16"	7.5°	4"	20,000 lb.	1 7/8"	0000000	00000	15,000 lb.	2"	0000000	00000
						1"-12	13/16"	7.5°	4"	__	__	__	00	13,500 lb.	2"	0000000	00000
		1 1/4"-7				1"	7.5°	6"	43,000 lb.	2 3/4"	00000000	000000	__	__	__	00
		M6 × 1 mm	4.3 mm			7.5°	19 mm	690 lb.	13 mm	0000000	0000	515 lb.	16 mm	0000000	00000
		M8 × 1.25 mm	7.9 mm			7.5°	25 mm	990 lb.	17 mm	0000000	00000	745 lb.	20 mm	0000000	00000
		M10 × 1.5 mm	9.6 mm			7.5°	32 mm	3,740 lb.	22 mm	0000000	00000	2,795 lb.	25 mm	0000000	00000
		M12 × 1.75 mm	11.1 mm			7.5°	48 mm	4,950 lb.	29 mm	0000000	00000	3,745 lb.	32 mm	0000000	00000
		M16 × 2 mm	11.1 mm			7.5°	64 mm	5,940 lb.	32 mm	0000000	00000	4,505 lb.	35 mm	0000000	00000
		M20 × 2.5 mm	13.9 mm			7.5°	76 mm	7,370 lb.	38 mm	0000000	00000	5,555 lb.	41 mm	0000000	00000
		M24 × 3 mm	17.5 mm			7.5°	102 mm	19,800 lb.	48 mm	0000000	00000	__	__	__	00

		316 Stainless Steel Base


						10-32	3/16"	7.5°	3/4"	700 lb.	1/2"	00000000	00000	__	__	__	00
						1/4"-20	5/16"	7.5°	1"	1,000 lb.	11/16"	00000000	00000	__	__	__	00
						5/16"-18	3/8"	7.5°	1 1/4"	2,500 lb.	7/8"	00000000	00000	__	__	__	00
						3/8"-16	3/8"	7.5°	1 1/4"	3,750 lb.	7/8"	00000000	00000	__	__	__	00
						1/2"-13	7/16"	7.5°	1 7/8"	5,000 lb.	1 1/8"	00000000	00000	__	__	__	00
						1/2"-20	7/16"	7.5°	1 7/8"	4,000 lb.	1 1/8"	00000000	00000	__	__	__	00
						5/8"-11	7/16"	7.5°	2 1/2"	6,000 lb.	1 1/4"	00000000	00000	__	__	__	00
						3/4"-10	11/16"	7.5°	3"	7,400 lb.	1 1/2"	00000000	00000	__	__	__	00
						1"-8	13/16"	7.5°	4"	20,000 lb.	1 7/8"	00000000	000000	__	__	__	00

						Plastic Base


								10-32	3/16"	7.5°	3/4"	150 lb.	1/2"	0000000	0000	150 lb.	5/8"	0000000	0000
								1/4"-20	5/16"	7.5°	1"	200 lb.	11/16"	0000000	0000	200 lb.	13/16"	0000000	0000
								5/16"-18	3/8"	7.5°	1 1/4"	250 lb.	7/8"	0000000	0000	250 lb.	1"	0000000	0000
								3/8"-16	3/8"	7.5°	1 1/4"	300 lb.	7/8"	0000000	0000	300 lb.	1"	0000000	0000
				1/2"-13				7/16"	7.5°	1 7/8"	700 lb.	1 1/8"	0000000	0000	700 lb.	1 1/4"	0000000	0000
				1/2"-20	7/16"			7.5°	1 7/8"	625 lb.	1 1/8"	00000000	00000	625 lb.	1 1/4"	00000000	00000
				5/8"-11	7/16"			7.5°	2 1/2"	1,200 lb.	1 1/4"	0000000	00000	1,200 lb.	1 3/8"	0000000	00000
				5/8"-18	7/16"			7.5°	2 1/2"	1,100 lb.	1 1/4"	00000000	00000	1,100 lb.	1 3/8"	00000000	00000
				3/4"-10	11/16"			7.5°	3"	1,800 lb.	1 1/2"	0000000	00000	1,800 lb.	1 5/8"	0000000	00000
				3/4"-16	11/16"			7.5°	3"	1,650 lb.	1 1/2"	00000000	00000	1,650 lb.	1 5/8"	00000000	00000
				1"-8	13/16"			7.5°	4"	2,400 lb.	1 7/8"	0000000	00000	2,400 lb.	2"	0000000	00000
				1"-12	13/16"			7.5°	4"	2,250 lb.	1 7/8"	00000000	00000	2,250 lb.	2"	00000000	00000
				1 1/4"-7	1 1/8"			7.5°	6"	3,600 lb.	2 3/4"	00000000	00000	3,600 lb.	2 7/8"	00000000	00000

Stay-Put Swivel Leveling Mounts with Threaded Hole

Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Two Mounting Holes

Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

							Mounting Holes		Without Cushion			With Rubber Cushion
	Thread Size	Thread Dp.	Cap. per Mount	Swivel Range of Motion	Base Dia.	Mounting Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Overall Ht.		Each	Overall Ht.		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut


		3/8"-16	3/8"	3,500 lb.	7.5°	4"	No	7/16"	2 11/16"	1 5/8"	00000000	00000	1 11/16"	00000000	000000
		1/2"-13	7/16"	4,000 lb.	7.5°	2"	No	1/4"	1 5/16"	1 5/8"	00000000	0000	1 11/16"	00000000	00000
		1/2"-13	7/16"	5,000 lb.	7.5°	4"	No	7/16"	2 11/16"	1 13/16"	00000000	00000	1 7/8"	00000000	00000
		5/8"-11	7/16"	5,000 lb.	7.5°	3"	No	5/16"	2 3/16"	1 11/16"	00000000	0000	1 3/4"	00000000	00000
		5/8"-11	7/16"	6,000 lb.	7.5°	4"	No	7/16"	2 11/16"	1 7/8"	00000000	00000	1 15/16"	00000000	00000
		3/4"-10	11/16"	7,500 lb.	7.5°	4"	No	7/16"	2 11/16"	2"	00000000	00000	2 1/16"	00000000	00000
		1"-8	13/16"	7,500 lb.	7.5°	4"	No	7/16"	2 11/16"	2 3/8"	000000000	00000	2 7/16"	000000000	00000
		1"-8	13/16"	10,000 lb.	7.5°	5"	No	1/2"	3 7/8"	3"	00000000	00000	3 5/16"	00000000	00000

		Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut


				3/8"-16	3/8"	3,500 lb.	7.5°	4"	No	7/16"	2 11/16"	1 5/8"	00000000	00000	1 11/16"	00000000	00000
				1/2"-13	7/16"	4,000 lb.	7.5°	2"	No	1/4"	1 5/16"	1 5/8"	00000000	00000	1 11/16"	00000000	00000
				1/2"-13	7/16"	5,000 lb.	7.5°	4"	No	7/16"	2 11/16"	1 13/16"	00000000	00000	1 7/8"	00000000	00000
				5/8"-11	7/16"	5,000 lb.	7.5°	3"	No	5/16"	2 3/16"	1 11/16"	00000000	00000	1 3/4"	00000000	00000
				5/8"-11	7/16"	6,000 lb.	7.5°	4"	No	7/16"	2 11/16"	1 7/8"	00000000	00000	1 15/16"	00000000	00000
				3/4"-10	11/16"	7,500 lb.	7.5°	4"	No	7/16"	2 11/16"	2"	00000000	00000	2 1/16"	00000000	00000
				1"-8	13/16"	7,500 lb.	7.5°	4"	No	7/16"	2 11/16"	2 3/8"	000000000	00000	2 7/16"	000000000	00000
				1"-8	13/16"	10,000 lb.	7.5°	5"	No	1/2"	3 7/8"	3"	00000000	00000	3 5/16"	00000000	00000

Vibration-Damping Swivel Leveling Mounts with Threaded Hole

A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Rubber Cushion—In addition to reducing vibration, the cushion protects floors from scrapes and gouges and cuts down on noise. It also grips surfaces so vibrating equipment doesn’t slide.

						With Rubber Cushion
	Thread Size	Thread Dp.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Cap. per Mount	Overall Ht.		Each
Zinc Yellow-Chromate-Plated Steel Base


		1/4"-20	5/16"	0.05"	7.5°	1 1/4"	150 lb.	1 7/16"	0000000	000000
		5/16"-18	3/8"	0.05"	7.5°	1 1/4"	200 lb.	1 1/2"	0000000	00000
		5/16"-18	3/8"	0.05"	7.5°	1 1/4"	900 lb.	1 1/2"	0000000	00000
		3/8"-16	3/8"	0.05"	7.5°	1 1/4"	200 lb.	1 1/2"	0000000	00000
		3/8"-16	3/8"	0.05"	7.5°	1 1/4"	995 lb.	1 1/2"	0000000	00000
		1/2"-13	7/16"	0.04"	7.5°	1 7/8"	1,000 lb.	1 3/4"	0000000	00000
		1/2"-13	7/16"	0.06"	7.5°	1 7/8"	2,400 lb.	1 3/4"	0000000	00000
		5/8"-11	7/16"	0.05"	7.5°	2 1/2"	1,800 lb.	1 7/8"	0000000	00000
		5/8"-11	7/16"	0.06"	7.5°	2 1/2"	4,400 lb.	1 7/8"	0000000	00000
		3/4"-10	9/16"	0.06"	7.5°	3"	2,500 lb.	2 1/8"	0000000	00000
		3/4"-10	9/16"	0.08"	7.5°	3"	6,500 lb.	2 1/8"	0000000	00000
		1"-8	11/16"	0.06"	7.5°	4"	4,500 lb.	2 1/2"	0000000	00000
		1"-8	11/16"	0.08"	7.5°	4"	11,800 lb.	2 1/2"	0000000	00000
		1 1/4"-7	1 1/4"	0.06"	7.5°	6"	10,000 lb.	2 7/8"	0000000	00000
		1 1/4"-7	1 1/4"	0.08"	7.5°	6"	27,100 lb.	2 7/8"	0000000	000000

Shock-Absorbing Swivel Leveling Mounts with Threaded Hole

Often used on presses, lathes, and die cutters, these mounts protect machines and floors from damage when equipment suddenly starts and stops. They have a solid rubber base, similar to a hockey puck, that isolates shock. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Square Rubber Base

					Base
Thread Size	Thread Dp.	Cap. per Mount	Deflection @ Cap.	Swivel Range of Motion	Lg.	Wd.	Overall Ht.		Each
1/2"-13	1/2"	350 lb.	0.13"	7.5°	3"	3"	7/8"	00000000	000000
1/2"-13	1/2"	700 lb.	0.13"	7.5°	3"	3"	7/8"	00000000	00000

Round Rubber Base

Thread Size	Thread Dp.	Cap. per Mount	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.	Each
1/2"-13	1/2"	500 lb.	0.13"	7.5°	3"	1"	000000
1/2"-13	1/2"	1,000 lb.	0.13"	7.5°	3"	1"	00000
3/4"-10	3/4"	3,700 lb.	0.13"	7.5°	5"	1 3/4"	00000
3/4"-10	3/4"	8,000 lb.	0.13"	7.5°	5"	1 3/4"	00000

Swivel Leveling Mounts with Bracket


With Corner Bracket	With Square Bracket	With Hex Socket Stud


Corner Bracket	Square Bracket

Install these mounts on the bottom of equipment without feet using the heavy duty bracket. They have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. You can also use the bracket to make your equipment mobile by replacing the mount with a caster that has a threaded stem.

Aluminum Base—These mounts are lighter than stainless steel ones, reducing the overall weight of your machine. They withstand occasional exposure to moisture, but don't hold up in wet environments like stainless steel.

Corner Bracket—These mounts cut across the corner of rails that join at a right angle, such as the structural framing rails used to build racks.

Square Bracket—Fasten these mounts to the bottom of flat surfaces such as storage cabinets and lockers.

Hex Stud—Turn the stud from above with a hex key to adjust the height without having to reach under your machine with a wrench.

						Bracket					Mounting Holes			Without Cushion				Replacement Brackets
	Thread Size	Thread Lg.	Swivel Range of Motion	Stud Drive Style	Base Dia.	Lg.	Wd.	Ht.	Material	Mounting Fasteners Included	No. of	Dia.	Ctr.-to-Ctr. Lg.	Cap. per Mount	Overall Ht.		Each		Each
Aluminum Base and Zinc-Plated Steel Stud





				Corner Bracket
				1/2"-13	3"	25°	__	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	500 lb.	4 5/16"	0000000	000000	0000000	000000



						Square Bracket
						1/2"-13	3"	25°	__	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500 lb.	4 5/16"	0000000	00000	0000000	00000
						5/8"-11	3 1/2"	25°	__	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000 lb.	5 1/4"	0000000	00000	0000000	00000

						303 Stainless Steel Base and 304 Stainless Steel Stud





										Corner Bracket
										1/2"-13	3"	25°	__	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	1,000 lb.	4 5/16"	0000000	00000	0000000	00000
										5/8"-11	3 1/2"	25°	__	2 3/8"	6"	6"	1 1/4"	Stainless Steel	No	4	3/8"	2"	1,000 lb.	5 1/4"	0000000	000000	0000000	00000



												Square Bracket
												1/2"-13	3"	25°	__	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500 lb.	4 5/16"	0000000	00000	0000000	00000
												5/8"-11	3 1/2"	25°	__	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000 lb.	5 1/4"	0000000	00000	0000000	00000
												3/4"-10	4"	25°	__	2 7/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,500 lb.	6"	0000000	000000	000000	00000

												303 Stainless Steel Base and 416 Stainless Steel Stud





																Corner Bracket
																1/2"-13	3"	25°	Hex	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	500 lb.	4 5/16"	0000000	00000	0000000	00000
																3/4"-10	4"	25°	Hex	2 7/8"	6"	6"	1 1/4"	Stainless Steel	No	4	3/8"	2"	1,500 lb.	6"	0000000	000000	0000000	00000



																		Square Bracket
																		1/2"-13	3"	25°	Hex	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500 lb.	4 5/16"	0000000	00000	0000000	00000
																		5/8"-11	3 1/2"	25°	Hex	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000 lb.	5 1/4"	0000000	00000	0000000	00000
																		3/4"-10	4"	25°	Hex	2 7/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,500 lb.	6"	0000000	000000	000000	00000

Sanitary Weld-On Swivel Leveling Mounts


Shown Installed

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. To level equipment on sloped floors, insert these mounts into a hole on the bottom of your equipment, and then weld the seam to seal the connection. Once you've adjusted the stud to your desired height and angle, weld the stud to the base.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

						With Rubber Cushion
	For Hole Dia.	Mounting Ht.	Swivel Range of Motion	Base Dia.	Food Industry Std.	Cap. per Mount	Overall Ht.		Each
304 Stainless Steel Base and Stud


		52 mm	56 mm to 85 mm	20°	109 mm	FDA Compliant 21 CFR 177.2600	6,000 lb.	151 mm	0000000	0000000
		62 mm	63 mm to 92 mm	20°	109 mm	FDA Compliant 21 CFR 177.2600	6,000 lb.	151 mm	0000000	000000